Ingersoll Rand QP1S05S1D Pistol Grip Air Screwdriver | 500 RPM | 2.7 - 47.8 (In-lbs) Torque Range | Adjustable Shut-Off Clutch

For repetitive assembly operations that require higher torque capacity and controlled automatic shut-off, the Ingersoll Rand QP1S05S1D Pistol Grip Air Screwdriver combines 500 RPM free speed with a 2.7 to 47.8 in-lb torque range and an adjustable shut-off clutch. The slower speed provides greater maximum torque capability than faster QP1S configurations, while the clutch stops the tool when the preset torque point is reached, helping reduce overtightening and improve consistency across repeated fastening cycles.

The Ingersoll Rand QP1S05S1D uses a pistol-grip configuration for controlled handling during bench-level, horizontal, and general production assembly work. Its 500 RPM speed supports deliberate fastener rundown on compatible joints, while the adjustable clutch allows output to be matched to fastening requirements within the specified torque range. This combination makes the tool a practical choice for assembly processes where additional turning force and repeatable shut-off matter more than maximum cycle speed.

Type: Pistol Grip Air Screwdriver | Model: QP1S05S1D | Configuration: Pistol Grip | Free Speed: 500 RPM | Torque Range: 2.7 - 47.8 in-lbs | Clutch Type: Adjustable Shut-Off

Features: Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque point is reached. 500 RPM free speed supports controlled rundown for compatible joints that require increased torque capability. 2.7 to 47.8 in-lb torque range provides adjustment flexibility for a broad range of compatible assembly fasteners. Pistol-grip configuration supports controlled handling during horizontal, angled, and bench-level fastening tasks. Automatic clutch shut-off helps reduce overtightening and supports more repeatable fastening from cycle to cycle. Lower-speed configuration provides greater maximum torque capability than faster QP1S screwdriver models. Pneumatic operation supports repetitive production use when supplied with properly conditioned compressed air. Made in USA:

Applications:

• Appliance manufacturing — fastening frames, housings, brackets, panels, and mechanical subassemblies within the specified torque range.
• Automotive component assembly — tightening compatible fasteners on interior, electrical, and mechanical production parts.
• Electrical equipment production — installing screws in cabinets, controls, enclosures, and equipment assemblies.
• Light manufacturing — completing repetitive fastening operations where higher torque capacity and automatic shut-off support process consistency.
• Bench assembly stations — handling horizontal and general screwdriving tasks where pistol-grip control and slower rundown are preferred.

FAQs:

• Q: What does the adjustable shut-off clutch do on the QP1S05S1D?
  A: The clutch lets the tool be adjusted for the required fastening torque within its specified range. Once the preset point is reached, the screwdriver automatically shuts off to help reduce overtightening and support repeatable results.
• Q: How does the QP1S05S1D compare with the QP1S10S1D?
  A: The QP1S05S1D operates at 500 RPM with a torque range of 2.7 to 47.8 in-lbs, while the QP1S10S1D operates at 1,000 RPM with a 2.7 to 39.8 in-lb range. The QP1S05S1D provides more maximum torque at a slower rundown speed.
• Q: When is a 500 RPM screwdriver a better choice than a faster model?
  A: A lower-speed screwdriver can be a better fit when the joint requires more turning force and controlled rundown matters more than rapid cycle completion. The correct tool should be selected according to the actual torque requirement and joint behavior.
• Q: Why choose a pistol-grip air screwdriver?
  A: The pistol-grip layout can provide practical hand positioning for horizontal, angled, and bench-level fastening. It is often easier to control in workstations where the fastener is not directly in line with the operator's arm.
• Q: Does automatic shut-off guarantee the same final torque on every fastener?
  A: Final results can vary with joint hardness, fastener condition, component material, bit fit, and air-supply conditions. Establish the clutch setting on the actual production joint and verify completed fasteners using the required quality-control method.

Looking for more information about the Ingersoll Rand Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com