Ingersoll Rand QP1S02S1TD Pneumatic Screwdriver | 250 RPM | 2.7 - 47.8 (In-lbs) Torque Range | Trigger-Start

For controlled fastening operations where a slow rundown speed and higher torque capability are preferred, the Ingersoll Rand QP1S02S1TD Pneumatic Screwdriver combines 250 RPM free speed with a 2.7 to 47.8 in-lb torque range and trigger-start operation. The 250 RPM configuration supports deliberate fastener rundown for compatible assembly joints, while manual trigger activation allows the operator to position the driver bit before intentionally beginning each fastening cycle.

The Ingersoll Rand QP1S02S1TD is suited to repetitive production tasks where controlled speed takes priority over rapid fastener rundown. Its broad 2.7 to 47.8 in-lb torque range allows the tool to be adjusted for different fastening requirements within its specified capability. At the same time, the 250 RPM speed provides a slower alternative to the 500 RPM QP1S05S1TD. This combination gives assembly operations another option for matching screwdriver speed and torque capability to the characteristics of the production joint.

Type: Pneumatic Screwdriver | Model: QP1S02S1TD | Free Speed: 250 RPM | Torque Range: 2.7 - 47.8 in-lbs | Start Type: Trigger-Start

Features: 250 RPM free speed provides slow, controlled fastener rundown for compatible production assembly applications. 2.7 to 47.8 in-lb torque range provides adjustment flexibility across fastening tasks within the tool's specified output capability. Trigger-start operation gives the operator deliberate control over when each fastening cycle begins. Slow-speed configuration supports assembly processes where controlled rundown is preferred over higher cycle speed. Operator-controlled activation allows the driver bit to be positioned and aligned with the fastener before rotation is initiated. Adjustable torque capability allows tool output to be matched to the fastener, joint characteristics, component material, and assembly requirements. Pneumatic operation supports repetitive fastening cycles when supplied with properly conditioned compressed air. Made in USA:

Applications:

• Appliance manufacturing — tightening compatible screws in frames, housings, brackets, panels, and mechanical subassemblies.
• Automotive component assembly — completing controlled fastening operations where slower rundown suits the joint and production process.
• Electrical equipment production — installing fasteners in cabinets, enclosures, controls, and equipment assemblies within the specified torque range.
• General manufacturing — handling repetitive screwdriving tasks where deliberate speed and adjustable torque are required.
• Production assembly stations — supporting fastening processes where the operator needs direct trigger control and a slower approach to final tightening.

FAQs:

• Q: What torque range does the Ingersoll Rand QP1S02S1TD provide?
  A: The specified torque range is 2.7 to 47.8 in-lbs. Select and verify the appropriate setting according to the fastener, joint characteristics, component material, and assembly specification.
• Q: Why would an assembly operation choose a 250 RPM screwdriver?
  A: A slower screwdriver provides more deliberate fastener rundown and can be useful for production joints where controlled approach and operator oversight are more important than maximum rundown speed.
• Q: How does the QP1S02S1TD differ from the QP1S05S1TD?
  A: Both supplied models have a 2.7 to 47.8 in-lb torque range and trigger-start operation. The QP1S02S1TD operates at 250 RPM, while the QP1S05S1TD operates at 500 RPM, making the QP1S02S1TD the slower-speed option.
• Q: What does trigger-start operation provide?
  A: Trigger-start operation lets the operator manually control when the screwdriver begins rotating, allowing the tool and driver bit to be aligned with the fastener before the fastening cycle starts.
• Q: Does the screwdriver's torque setting guarantee final fastener torque?
  A: Final fastening results can vary with joint characteristics, fastener condition, component material, bit fit, and air-supply conditions. Verify the resulting torque on the actual production joint using the quality-control method required for the assembly process.

Looking for more information about the Ingersoll Rand Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com