For processing areas, washdown stations, marine facilities, and other locations where exposed hose needs added protection, the Coxreels ENL-N-350-SS spring rewind enclosed hose reel stores up to 50 feet of 3/8-inch I.D. hose. Its 300 PSI maximum pressure rating supports compatible low-pressure fluid service, while the enclosed stainless steel configuration helps protect the hose and reel mechanism and creates a cleaner finished installation.
Part of the SS-EN Series, this reel incorporates a non-corrosive external fluid path with a machined stainless steel 90-degree full-flow NPT swivel inlet. Nitrile swivel seals are lubricated with non-toxic food-grade grease. The spring rewind mechanism returns the hose to the enclosure after use, helping reduce loose hose around floors, equipment, and work surfaces.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Enclosed Stainless Steel Spring Rewind Hose Reel | Series: SS-EN Series | Model: ENL-N-350-SS | Configuration: Less Hose | Hose I.D.: 3/8" | Hose Capacity: 50 ft | Maximum Pressure: 300 PSI | Overall Dimensions: 8-1/2" W x 21-3/4" H x 21-7/8" L
Features:
- Sturdy enclosed reel configuration provides a clean finished appearance and greater hose protection.
- Non-corrosive external fluid path incorporates a machined stainless steel 90-degree full-flow NPT swivel inlet.
- Nitrile swivel seals are lubricated with non-toxic food-grade grease.
- Spring-powered rewind returns the hose to the enclosure after use for orderly storage.
- 50-foot capacity provides extended reach across processing, cleaning, maintenance, and service areas.
- Less-hose configuration allows the buyer to select hose material and fittings for the intended fluid and operating conditions.
- Enclosed housing helps shield the stored hose and internal reel components from incidental contact.
Made in USA: 
Applications:
- Food and beverage processing areas requiring protected storage for compatible utility or washdown hose.
- Chemical processing facilities where hose and fittings are verified for the specific transferred media.
- Marinas, docks, and boat-service locations exposed to moisture, spray, or salt air.
- Sanitation and washdown stations where the enclosure helps keep the retracted hose contained.
- Bottling, packaging, and production areas that benefit from an enclosed stainless steel reel installation.
- Service vehicles and maintenance workspaces requiring up to 50 feet of 3/8-inch hose reach.
FAQs:
- Q: Does the Coxreels ENL-N-350-SS include hose?
A: No. This model is supplied less hose, so no hose is installed. The buyer must provide compatible 3/8-inch I.D. hose and fittings suited to the intended fluid, temperature, pressure, and operating environment. - Q: What is the purpose of the enclosed reel housing?
A: The enclosure covers the stored hose and reel mechanism for a cleaner finished installation. It also provides greater hose protection than an open-frame reel. - Q: How much hose can this reel store?
A: The ENL-N-350-SS is listed for up to 50 feet of 3/8-inch I.D. hose. Confirm the allowable hose outside diameter before selecting replacement hose. - Q: Is the completed hose system automatically rated to 300 PSI?
A: No. The reel has a maximum pressure rating of 300 PSI, but hose and fittings are supplied separately. The assembled system must operate within the lowest pressure rating of every connected component. - Q: How does this model differ from the ENL-N-335-SS?
A: The ENL-N-350-SS stores up to 50 feet of 3/8-inch I.D. hose and weighs approximately 58 pounds. The ENL-N-335-SS stores 35 feet and uses a smaller enclosure.
| LESS HOSE | SIZE INDEX |
|||||
|---|---|---|---|---|---|---|
| LESS HOSE SKU | I.D. | O.D. | FT. | PSI | APRX. LBS. | |
|
P SERIES
|
||||||
| P-LPL-335-SS | 3/8" | 1/2" | 35 | 300 | 34 | 1 |
| P-LPL-350-SS | 3/8" | 5/8" | 50 | 300 | 39 | 1 |
| P-LPL-425-SS | 1/2" | 3/4" | 25 | 300 | 39 | 2 |
|
SH & MP SERIES
|
||||||
| SHL-N-350-SS | 3/8" | 5/8" | 50 | 300 | 44 | 3 |
| SHL-N-450-SS | 1/2" | 3/4" | 50 | 300 | 46 | 3 |
| SHL-N-525-SS | 3/4" | 1-1/16" | 25 | 300 | 45 | 4 |
| MPL-N-350-SS | 3/8" | 1-1/16" | 50 | 3,000 | 53 | 3 |
| MPL-N-450-SS | 1/2" | 1-3/16" | 50 | 2,500 | 53 | 3 |
|
T SERIES
|
||||||
| TSHL-N-350-SS | 3/8" | 5/8" | 50 | 300 | 55 | 5 |
| TSHL-N-375-SS | 3/8" | 5/8" | 75 | 300 | 73 | 6 |
| TSHL-N-3100-SS | 3/8" | 5/8" | 100 | 300 | 74 | 6 |
| TSHL-N-450-SS | 1/2" | 3/4" | 50 | 300 | 55 | 5 |
| TSHL-N-475-SS | 1/2" | 3/4" | 75 | 300 | 71 | 6 |
| TSHL-N-4100-SS | 1/2" | 3/4" | 100 | 300 | 80 | 6 |
| TSHL-N-550-SS | 3/4" | 1-1/16" | 50 | 300 | 70 | 7 |
| TMPL-N-3100-SS | 3/8" | 1-1/16" | 100 | 3,000 | 82 | 6 |
| TMPL-N-4100-SS | 1/2" | 1-3/16" | 100 | 3,000 | 80 | 6 |
|
EN SERIES
|
||||||
| ENL-N-335-SS | 3/8" | 5/8" | 35 | 300 | 46 | 8 |
| ENL-N-350-SS | 3/8" | 5/8" | 50 | 300 | 58 | 9 |
| ENL-N-425-SS | 1/2" | 3/4" | 25 | 300 | 63 | 8 |
| ENL-N-450-SS | 1/2" | 3/4" | 50 | 300 | 61 | 9 |
| ENML-N-335-SS | 3/8" | 1-1/16" | 35 | 3,000 | 64 | 8 |
| ENML-N-350-SS | 3/8" | 1-1/16" | 50 | 3,000 | 80 | 9 |
| ENML-N-425-SS | 1/2" | 1-3/16" | 25 | 2,500 | 61 | 8 |
| ENML-N-450-SS | 1/2" | 1-3/16" | 50 | 2,500 | 82 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Spring Rewind Enclosed Hose Reel
- Series
- SS-EN Series
- Hose Inside Diameter (in.)
- 3/8
- Hose Outside Diameter (in.)
- 5/8
- Hose Length (ft.)
- 50
- Maximum Working Pressure (PSI)
- 300
- Hose Included
- No
- Width (in.)
- 8.5
- Height (in.)
- 21.75
- Length (in.)
- 21.88
- Mounting Pattern (in.)
- 4M
- Mounting Pattern (in.)
- 5N
- Base (in.)
- 6X
- Base (in.)
- 6Y
This product hasn't received any reviews yet. Be the first to review this product!