Built for high-pressure hose retrieval where 115V powered rewind and an explosion proof motor option are required, the Coxreels HP1125-5-200-EA uses an electric 115V explosion proof 1/2 HP motor to manage up to 200 ft of 3/4" I.D. hose at a 4500 PSI maximum pressure rating. The electric rewind configuration reduces manual effort when retrieving long, heavy hose assemblies in service trucks, fleet shops, maintenance skids, and industrial fluid handling areas.
Part of the HP1125 Series, this high-pressure motor rewind reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, open drum slot design, and permanently lubricated self-aligning pillow block bearings to support controlled hose payout and powered rewind. The external fluid path, electroless nickel plated steel 90° full-flow NPT swivel, and AFLAS swivel seals support compatible high-pressure oil, grease, hydraulic, lubrication, and fluid service when paired with the proper hose and fittings. This model is supplied less hose, allowing buyers to install a hose assembly selected for their exact pressure, fluid, temperature, bend radius, fitting, and site safety requirements.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Motor: 115V Explosion Proof 1/2 HP Electric Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 4500 PSI | Hose Included: No | Swivel Seals: AFLAS | Rewind: Electric Motor | Overall Dimensions: 38" W x 19.25" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- 115V explosion proof 1/2 HP electric motor rewind supports powered hose retrieval in applications requiring this motor configuration.
- HP1125 Series construction supports high-pressure applications up to 4500 PSI.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel.
- AFLAS swivel seals are used on HP1125 Series reels for compatible high-pressure fluid service.
- Reliable direct gear drive on motor driven models provides smooth powered retraction without a chain drive.
- One-piece all welded steel 'A' frame construction provides a rigid mounting base for trucks, skids, benches, floors, or fixed equipment.
- Exclusive low profile outlet riser and open drum slot design helps produce a flat, smooth hose wrap while reducing hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
Made in USA: 
Applications:
- High-pressure hydraulic service trucks using 115V powered rewind for long hose retrieval after field repair work.
- Fleet and heavy equipment maintenance bays handling grease, hydraulic oil, lubrication, or compatible high-pressure fluid hose assemblies.
- Industrial MRO stations where powered rewind helps keep 3/4" hose controlled, stored, and off the floor between service tasks.
- Manufacturing, utility, and fabrication facilities reviewing explosion proof motor options for reel installations, subject to site approval.
- Construction and agricultural equipment service areas where high-pressure hose storage must support long reach and repeated deployment.
FAQs:
- Q: What does 'less hose' mean on the HP1125-5-200-EA?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'EA' motor option indicate?
A: For this listing, the 'EA' configuration refers to a 115V explosion proof 1/2 HP electric motor rewind option. It provides powered hose retraction instead of manual crank, air motor, or hydraulic rewind operation. - Q: Does the explosion proof motor make the entire reel approved for hazardous locations?
A: Not by itself. The motor option is listed as explosion proof, but the complete installation, wiring, controls, switches, grounding, hose assembly, and area classification must be reviewed by qualified personnel before use in a classified or hazardous location. - Q: What makes the HP1125 Series different from the standard 1125 Series?
A: The HP1125 Series is the high-pressure version and this model is listed at 4500 PSI. It also uses high-pressure swivel construction and AFLAS swivel seals for compatible high-pressure fluid service. - Q: Can this reel be used for hydraulic oil or grease service?
A: Yes, when the selected hose, fittings, seals, temperature range, and complete assembly are compatible with the fluid and system pressure. The reel is rated to 4500 PSI, but the installed hose assembly must also meet the application requirements.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
