Built for powered hose retrieval on mobile equipment, service trucks, fleet maintenance skids, and industrial fluid handling stations, the Coxreels 1125-5-200-EB combines 24V DC electric rewind with a 1/2 HP motor to manage up to 200 ft of 3/4" I.D. hose at a 3000 PSI maximum pressure rating. The 24V DC motor configuration is especially useful where the reel is powered from vehicle or equipment electrical systems rather than fixed shop power.
Part of the 1125 Series, this motorized hose reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to help guide hose into a flat, smooth wrap with reduced crimping. Motor-driven 1125 Series reels use a direct gear drive for powered retraction, while the permanently lubricated self-aligning pillow block bearings support smooth drum rotation. This model is supplied less hose, allowing the buyer to install a hose assembly matched to the fluid, fittings, bend radius, pressure rating, and installation requirements.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: 1125 Series | Motor: 24V DC 1/2 HP Electric Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 3000 PSI | Hose Included: No | Swivel Seals: Nitrile | Ship Weight: 80 lbs | Overall Dimensions: 38" W x 19.25" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- 24V DC 1/2 HP electric motor rewind supports powered hose retrieval on vehicles, skids, and equipment platforms using DC power.
- Reliable direct gear drive on motor driven models provides smooth retraction without a chain drive.
- Machined solid brass 90° full-flow NPT swivel supports efficient flow through the reel and allows seal maintenance without removing the reel from its mount.
- Nitrile swivel seals are used on standard 1125 Series models for compatible air, water, oil, grease, lubrication, and hydraulic service.
- All welded steel 'A' frame construction provides a rigid base for floor, bench, vehicle, skid, or fixed equipment mounting.
- Exclusive low profile outlet riser and open drum slot design help produce a flat, smooth hose wrap with reduced hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
- Adjustable tension brake helps prevent free-wheeling during hose payout and rewind.
Made in USA: 
Applications:
- Mobile service trucks using 24V DC power to retrieve long hose runs after field maintenance work.
- Fleet and heavy equipment maintenance skids where hose storage must support oil, lubrication, hydraulic, or compatible fluid handling.
- Industrial MRO stations that need powered retraction to keep 3/4" hose controlled between service tasks.
- Construction, agriculture, and utility service equipment where vehicle-mounted hose reels help crews reach machinery in the field.
- Manufacturing and fabrication facilities using DC-powered reel systems as part of fixed or semi-mobile fluid delivery setups.
FAQs:
- Q: What does 'less hose' mean on the 1125-5-200-EB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'EB' configuration indicate?
A: For this listing, the 'EB' configuration refers to a 24V DC electric 1/2 HP motor rewind option. It provides powered hose retraction instead of manual crank operation. - Q: Where is a 24V DC rewind reel commonly used?
A: A 24V DC rewind reel is often selected for mobile equipment, field service trucks, utility vehicles, and skids where DC power is available. Confirm the vehicle or equipment power supply, wiring, controls, and circuit protection before installation. - Q: Can this reel be used for hydraulic or lubrication service?
A: Yes, this 1125 Series model is listed at 3000 PSI and is commonly selected for grease, hydraulics, oil, lubrication, air, water, and compatible fluid handling. The complete hose assembly, fittings, seals, and fluid compatibility must match the system requirements. - Q: How much hose will this reel hold?
A: This model is listed for 200 ft of 3/4" I.D. hose with a 1-1/4" hose O.D. Hose outside diameter affects reel capacity, so larger hose may reduce the amount that fits on the drum.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
