Built for powered hose retrieval on mobile service trucks, fleet maintenance skids, utility vehicles, and industrial fluid handling stations, the Coxreels 1125-5-200-ED combines 12V DC electric rewind with an explosion proof 1/2 HP motor to manage up to 200 ft of 3/4" I.D. hose at a 3000 PSI maximum pressure rating. The 12V DC configuration supports vehicle-based power systems, while the explosion proof motor option is intended for applications where the motor specification must be reviewed against site safety requirements.
Part of the 1125 Series, this motorized hose reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to help guide hose into a flat, smooth wrap with reduced crimping. Motor-driven 1125 Series reels use a direct gear drive for powered retraction, and the permanently lubricated self-aligning pillow block bearings help the drum rotate smoothly under repeated use. This model is supplied less hose, allowing the buyer to install hose selected for the fluid, fittings, pressure rating, bend radius, temperature, and installation environment.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: 1125 Series | Motor: 12V DC Explosion Proof 1/2 HP Electric Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 3000 PSI | Hose Included: No | Swivel Seals: Nitrile | Overall Dimensions: 38" W x 19.25" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- 12V DC explosion proof 1/2 HP electric motor rewind supports powered hose retrieval on vehicles, skids, and equipment platforms using DC power.
- Reversible motor configuration allows powered reel operation in the motor option specified for this SKU.
- Reliable direct gear drive on motor driven models provides smooth retraction without a chain drive.
- Machined solid brass 90° full-flow NPT swivel supports efficient flow through the reel and allows seal maintenance without removing the reel from its mount.
- Nitrile swivel seals are used on standard 1125 Series models for compatible air, water, oil, grease, lubrication, and hydraulic service.
- All welded steel 'A' frame construction provides a rigid base for floor, bench, vehicle, skid, or fixed equipment mounting.
- Exclusive low profile outlet riser and open drum slot design help produce a flat, smooth hose wrap with reduced hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
Made in USA: 
Applications:
- Mobile service trucks using 12V DC power to retrieve long hose runs after field maintenance work.
- Fleet and heavy equipment maintenance skids handling oil, lubrication, hydraulic, or compatible fluid hose assemblies.
- Industrial MRO stations where powered retraction helps keep 3/4" hose controlled and off the floor between service tasks.
- Construction, agriculture, and utility service equipment where vehicle-mounted hose reels help crews reach machinery in the field.
- Facilities reviewing explosion proof motor options for reel installations, subject to site electrical and safety approval.
FAQs:
- Q: What does 'less hose' mean on the 1125-5-200-ED?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'ED' motor option indicate?
A: The ED suffix refers to a 12V DC, 1/2 HP explosion proof reversible motor option. For this SKU, that configuration provides powered hose retraction instead of manual crank operation. - Q: Does the explosion proof motor make the entire reel approved for hazardous locations?
A: Not by itself. The motor option is listed as explosion proof, but the complete installation, wiring, controls, switches, grounding, area classification, and hose assembly must be reviewed by qualified personnel before use in a classified or hazardous location. - Q: Can this reel be used for hydraulic or lubrication service?
A: Yes, this 1125 Series model is listed at 3000 PSI and is commonly selected for grease, hydraulics, oil, lubrication, air, water, and compatible fluid handling. The hose, fittings, seals, and complete assembly must also match the fluid and pressure requirements. - Q: How much hose will this reel hold?
A: This model is listed for 200 ft of 3/4" I.D. hose with a 1-1/4" hose O.D. Hose outside diameter affects reel capacity, so larger hose may reduce the amount that fits on the drum.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
