Built for air-powered hose retrieval in mobile service units, fleet maintenance bays, construction equipment shops, and industrial MRO areas, the Coxreels 1125-5-200-AB provides motorized storage for up to 200 ft of 3/4" I.D. hose at a 3000 PSI maximum pressure rating. The compressed air #6 Gast motor rewind helps bring long hose runs back onto the reel without manual cranking, which is especially useful when the reel is mounted on a truck, skid, bench, or service area where hose is deployed frequently.
Part of the 1125 Series, this motorized hose reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to help guide hose into a flatter, smoother wrap. The permanently lubricated self-aligning pillow block bearings support smooth drum rotation, while the machined 90° full-flow NPT swivel helps route fluid through the reel with less flow restriction than a restricted swivel path. This model is supplied less hose, allowing the buyer to install hose selected for the application, fittings, fluid compatibility, and site requirements.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Motor: #6 Gast Air Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 3000 PSI | Hose Included: No | Swivel Seals: Nitrile | Ship Weight: 63 lbs | Overall Dimensions: 35.38" W x 18.75" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- Compressed air #6 Gast motor rewind supports powered hose retrieval where shop air is already available.
- Reliable direct gear drive on motor driven models provides smooth retraction without a chain drive.
- Machined solid brass 90° full-flow NPT swivel supports efficient flow through the reel and allows straightforward seal maintenance.
- Nitrile swivel seals are used for standard 1125 Series fluid service compatibility.
- All welded steel 'A' frame construction provides a rigid mounting base for vehicle, bench, floor, or skid installation.
- Exclusive low profile outlet riser and open drum slot design help create a flat, smooth hose wrap with reduced crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
- Adjustable tension brake helps prevent free-wheeling during hose payout and rewind.
Made in USA: 
Applications:
- Fleet and truck maintenance bays where long hose reach is needed across multiple service positions.
- Mobile service trucks and field repair skids using compressed air to power reel rewind functions.
- Industrial MRO areas that need organized hose storage for air, oil, lubrication, hydraulic, or compatible fluid handling tasks.
- Construction and heavy equipment service yards where keeping hose off the floor improves access around machinery.
- Manufacturing, fabrication, and maintenance shops that prefer motorized rewind for repeated hose deployment throughout the workday.
FAQs:
- Q: What does 'less hose' mean on the 1125-5-200-AB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the application, fluid type, fittings, temperature, bend radius, and 3000 PSI maximum pressure requirement. - Q: What does the 'AB' suffix indicate?
A: For this listing, the 'AB' configuration refers to a compressed air #6 Gast motor rewind option. This means the reel uses compressed air to power hose retraction instead of relying on a hand crank. - Q: Can this reel be used for hydraulic or lubrication service?
A: Yes, the 1125 Series is commonly used for grease, hydraulics, oil, lubrication, air, water, and compatible fluid handling when the hose, fittings, seals, and pressure rating match the system. Always verify the full hose assembly before putting the reel into service. - Q: Why choose an air motor rewind reel instead of an electric rewind reel?
A: Air motor rewind is a practical choice in shops, trucks, and facilities where compressed air is already available or where electrical wiring is less convenient. It can also be useful in service environments that standardize pneumatic equipment for reel operation. - Q: How much hose will this reel hold?
A: This model is listed for 200 ft of 3/4" I.D. hose with a 1-1/4" hose O.D. Hose outside diameter affects reel capacity, so larger-than-listed hose may reduce the amount that fits on the drum.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
