Built for powered hose retrieval in service trucks, fleet maintenance bays, heavy equipment shops, and industrial fluid handling areas, the Coxreels 1125-5-200-H uses hydraulic rewind to manage up to 200 ft of 3/4" I.D. hose at a 3000 PSI maximum pressure rating. The hydraulic rewind configuration helps reduce manual effort when retracting long, heavy hose runs, making it useful where hose is deployed repeatedly across shop floors, field service skids, or mobile maintenance vehicles.
Part of the 1125 Series, this reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to help guide hose into a flatter, smoother wrap with reduced crimping. Permanently lubricated self-aligning pillow block bearings support smooth drum rotation, while the 90° full-flow NPT swivel provides a clear fluid path through the reel. This model is supplied less hose, allowing the buyer to install a hose assembly selected for the fluid, fittings, pressure rating, bend radius, temperature, and site requirements.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Hydraulic Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind: Hydraulic Motor | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 3000 PSI | Hose Included: No | Swivel Seals: Nitrile | Overall Dimensions: 35.38" W x 18.75" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- Hydraulic rewind configuration supports powered hose retrieval where hydraulic power is available on trucks, skids, or equipment platforms.
- Reliable direct gear drive on motor driven models provides smooth retraction without a chain drive.
- Machined solid brass 90° full-flow NPT swivel supports efficient flow through the reel and allows seal maintenance without removing the reel from its mount.
- Nitrile swivel seals are used on standard 1125 Series models for compatible air, water, oil, grease, lubrication, and hydraulic service.
- All welded steel 'A' frame construction provides a rigid mounting base for vehicle, skid, floor, bench, or fixed equipment installation.
- Exclusive low profile outlet riser and open drum slot design help create a flat, smooth hose wrap while reducing hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
- Adjustable tension brake helps prevent free-wheeling during hose payout and rewind.
Made in USA: 
Applications:
- Mobile hydraulic service trucks retrieving long hose runs after field maintenance, lubrication, or equipment repair work.
- Fleet and heavy equipment maintenance areas handling oil, grease, hydraulic, or compatible fluid hose assemblies.
- Construction, agriculture, and utility service skids where hydraulic power is already available for reel operation.
- Industrial MRO stations that need powered retraction to keep 3/4" hose controlled and off the floor between service tasks.
- Manufacturing and fabrication facilities using fixed or semi-mobile hose reels for pressure-rated fluid delivery systems.
FAQs:
- Q: What does 'less hose' mean on the 1125-5-200-H?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'H' configuration indicate?
A: For this listing, the 'H' configuration refers to hydraulic rewind. The reel uses hydraulic power for hose retraction instead of a hand crank, air motor, or electric motor. - Q: Why choose hydraulic rewind instead of electric or air motor rewind?
A: Hydraulic rewind is useful on service trucks, skids, and equipment platforms where hydraulic power is already available. It can simplify power sourcing in mobile hydraulic service setups and reduce manual rewinding effort on longer hose lengths. - Q: Can this reel be used for hydraulic oil or lubrication service?
A: Yes, this 1125 Series model is listed at 3000 PSI and is commonly selected for grease, hydraulics, oil, lubrication, air, water, and compatible fluid handling. The complete hose assembly, fittings, seals, and fluid compatibility must also match the system requirements. - Q: How much hose will this reel hold?
A: This model is listed for 200 ft of 3/4" I.D. hose with a 1-1/4" hose O.D. Hose outside diameter affects reel capacity, so larger hose may reduce the amount that fits on the drum.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
