Coxreels 1125-4-325-BYXX Hand Crank Storage Hose Reel | 1125 Series | Less Hose/Cord/Cable

When long lengths of hose, cord, cable, wire, rope, tape, chain, or similar material need controlled storage without a live fluid connection, the Coxreels 1125-4-325-BYXX Hand Crank Storage Hose Reel provides a manual winding platform built on the 1125 Series frame. This less hose/cord/cable storage-only configuration has no swivel and no riser, so it is intended for organizing and maintaining bulk material rather than transferring air, water, oil, grease, fuel, or hydraulic fluid under pressure.

The 31.5" W x 18.75" H x 17.63" L overall size gives buyers a clear footprint for mounting on service trucks, shop benches, skids, carts, trailers, or equipment platforms. Its 21.44" x 10" mounting pattern and 23.38" x 15.38" base dimensions help with pre-installation layout, while the direct hand crank, adjustable tension brake, pillow block bearings, and all-welded A-frame construction support repeat winding and unwinding in stationary or mobile storage setups.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Hand Crank Storage Hose Reel | Brand: Coxreels | Model: 1125-4-325-BYXX | Series: Storage Series / 1125 Series Frame | Configuration: Less Hose/Cord/Cable | Hose Included: No | Swivel/Riser: No swivel and no riser | Max PSI: 0 PSI | Rewind: Direct Hand Crank | Ship Weight: 48 lbs | Overall Dimensions: 31.5" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 15.38" Y

Features:

• Storage-only reel configuration has no swivel and no riser, making it suitable for storing and maintaining long lengths of hose, cord, cable, wire, rope, tape, chain, and other compatible materials.
• Solid steel direct hand crank with smooth round handle provides manual rewind control without a spring mechanism or electric, air, or hydraulic motor.
• CNC robotically spun and ribbed discs with rolled edges help add reel strength, support safer handling, and reduce sharp-edge exposure around stored material.
• One-piece, all CNC robotically welded 1/4" steel A-frame base is not bolted together, helping maintain frame rigidity during repeated winding, transport, and installation.
• Adjustable tension brake controls the speed of the draw and helps prevent the reel from free wheeling during operation, transport, or storage.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation and help reduce routine bearing maintenance.
• Chip-resistant and rust-inhibiting CPC powder coat finish helps protect the reel in shop, utility fleet, trailer, and equipment storage environments.

Made in USA:

2 Year Warranty

Applications:

• Industrial MRO and plant maintenance - storing bulk hose, rope, cable, cord, or chain near tool cribs, work cells, and maintenance areas.
• Utility and fleet service vehicles - mounting on mechanic trucks, trailers, skids, or mobile maintenance units where loose coils need controlled storage.
• Construction and field support - organizing long material runs for temporary jobsite use without routing through a pressurized swivel.
• Fabrication and repair shops - keeping cable, rope, tape, or non-pressurized hose off the floor around benches, equipment bays, and service areas.
• Garage, farm, and property maintenance - manually winding utility hose, rope, extension cord, wire, or chain when a storage-only reel is preferred.

FAQs:

• Q: What does less hose/cord/cable mean?
  A: It means the reel is supplied without hose, cord, or cable installed. The buyer must provide the compatible material separately.
• Q: Is the 1125-4-325-BYXX a pressure-rated hose reel?
  A: No. This BYXX storage model has no swivel and no riser, and the maximum PSI is listed as 0. It is for storage only, not live fluid transfer.
• Q: What materials can this storage reel hold?
  A: Coxreels lists the Storage Series for long lengths of hose, collapsible hose, power cord, cable, rope, wire, barbed wire, tape, chain, and other similar materials. Confirm the material outside diameter, bend radius, length, and weight before ordering.
• Q: Does this reel rewind automatically?
  A: No. This model uses a direct hand crank for mechanical rewind. That makes it a good choice when the user wants simple manual control rather than spring rewind tension or powered rewind.
• Q: What mounting dimensions should be checked before installation?
  A: Verify the overall dimensions of 31.5" W x 18.75" H x 17.63" L, the 21.44" x 10" mounting pattern, and the 23.38" x 15.38" base dimensions against the mounting surface.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com