Cleco 19PTA15Q P-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 260 RPM | 3.7 - 10.8 (ft-lbs) Torque Range

For assembly stations that need higher torque in a pistol-style air screwdriver, the Cleco 19PTA15Q P-Handle Pneumatic Screwdriver delivers a 260 RPM free speed with a 3.7 - 10.8 ft-lbs torque range. The slower speed gives the operator better control at the upper end of the 19 Series torque range, making this model well-suited for prevailing torque fasteners, threaded inserts, brackets, covers, and assemblies where fastener consistency matters more than maximum run-down speed.

The 19 Series P-handle configuration lets the operator apply forward force during fastening, while the trigger start throttle provides familiar, deliberate start control. Its Clecomatic shut-off clutch stops the tool when the selected torque is reached, helping improve repeatability compared with basic clutch or manually controlled tools. A 1/4" hex quick-change drive accepts common screwdriver bits, and the included side handle gives added control when working near the top of the tool’s torque range.

Type: Pneumatic Screwdriver | Brand: Cleco | Model: 19PTA15Q | Series: 19 Series | Handle Style: P-Handle / Pistol Grip | Start Type: Trigger Start | Clutch Type: Clecomatic Shut-Off | Drive Size: 1/4" Hex Quick Change | Free Speed: 260 RPM | Torque Range: 3.7 - 10.8 ft-lbs | Torque Range: 45 - 130 in-lbs | Torque Range: 5.1 - 14.7 Nm | Air Inlet: 1/4" NPT | Min. Hose Size: 3/8" | Air Pressure: 90 PSI | Air Consumption: 11 SCFM | Overall Length: 9.7" | Tool Weight: 1.91 lb | Operation: Reversible

Features:

• Durable Clecomatic clutch supports torque repeatability and longer calibration cycles in controlled fastening work.
• P-handle shape helps operators apply forward pressure when driving prevailing torque fasteners.
• Trigger start control gives a familiar pistol-grip feel for production, repair, and bench assembly work.
• Reverse lever can be positioned for left-handed or right-handed operators.
• 1/4" hex quick change drive allows fast bit changes when switching between screw types.
• Included side handle provides added control for higher torque fastening tasks.
• All torque springs required to meet the indicated torque specification are included.

Applications:

• High-volume assembly: driving screws and threaded fasteners where torque repeatability is required across repeated cycles.
• Aerospace and precision manufacturing: controlled fastening on brackets, access panels, and assemblies that require consistent torque output.
• Automotive and heavy truck component assembly: fastening interior parts, covers, light brackets, housings, and service-access hardware.
• Appliance and equipment production: installing higher-torque screws into sheet metal, molded parts, and subassemblies.
• Maintenance and repair benches: removing and reinstalling fasteners during inspection, rework, and component rebuild tasks.

FAQs:

• Q: What makes the 19PTA15Q different from faster 19 Series models?
  A: The 19PTA15Q runs at 260 RPM and covers the higher 3.7 - 10.8 ft-lbs torque range. That makes it a better fit for slower, more controlled fastening at higher torque levels.
• Q: What does the Clecomatic shut-off clutch do?
  A: The Clecomatic shut-off clutch stops the screwdriver when the set torque is reached. This helps reduce over-tightening and supports more consistent fastening from part to part.
• Q: Does the Cleco 19PTA15Q include a side handle?
  A: Yes. The 19PTA15Q includes a side handle, which helps the operator control the tool during higher torque fastening applications.
• Q: What bits does this screwdriver use?
  A: This model uses a 1/4" hex quick change drive. Use compatible 1/4" hex screwdriver bits matched to the fastener head style and application.
• Q: What air setup is required for this tool?
  A: Tool performance is rated at 90 PSI. Use a 3/8" minimum hose size and an air supply capable of supporting the listed 11 SCFM air consumption.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com