Cleco 19PTA06Q P-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 260 RPM | 0.8 - 3.7 (ft-lbs) Torque Range

Built for controlled screwdriving where slower run-down speed helps protect parts, the Cleco 19PTA06Q P-handle pneumatic screwdriver gives assembly teams a 260 RPM free speed and a 0.8 - 3.7 ft-lbs torque range for repeat fastening on small machine screws, brackets, covers, panels, and light mechanical assemblies. The lower-speed configuration is useful when the operator needs more time to guide the bit, start fasteners cleanly, or work around finished surfaces where overrun can damage the part.

This 19 Series Cleco screwdriver uses a trigger start throttle and Clecomatic shut-off clutch, a torque-control clutch that stops the tool when the preset torque is reached. That shut-off action helps improve fastening repeatability compared with manual shut-off by feel, making the 19PTA06Q a practical choice for production benches, repair stations, and assembly cells that need controlled torque in a compact P-handle format.

Type: P-Handle Pneumatic Screwdriver | Series: Cleco 19 Series | Model: 19PTA06Q | Start Type: Trigger Start | Clutch Type: Clecomatic Shut-Off Clutch | Drive Size: 1/4" Hex Quick Change | Free Speed: 260 RPM | Torque Range: 0.8 - 3.7 ft-lbs / 10 - 45 in-lbs / 1.1 - 5.1 Nm | Length: 8.4" | Weight: 1.50 lbs | Air Consumption: 11 SCFM | Air Inlet: 1/4" | Minimum Hose I.D.: 3/8" | Operating Pressure: 90 PSI

Features:

• Clecomatic shut-off clutch stops the tool at the selected torque setting to support repeatable fastening.
• Trigger start operation gives the operator direct throttle control for careful screw starting and paced assembly work.
• 260 RPM free speed supports slower, more deliberate run-down on small fasteners and sensitive assemblies.
• P-handle body style provides a centered grip for bench assembly, fixture work, and repeated fastening tasks.
• 1/4" hex quick-change drive works with common production screwdriver bits for fast bit changes.
• Reversible operation supports both screw installation and removal during service, rework, and inspection.
• Compact 1.50 lb tool weight helps reduce handling effort during repetitive production use.

Applications:

• Electronics and instrument assembly — installing small screws in housings, covers, brackets, and component panels where slower tool speed helps control placement.
• Appliance and light equipment production — repeat fastening on panels, frames, trim pieces, guards, and subassemblies.
• Automotive interior and trim work — controlled screwdriving on non-structural brackets, modules, and plastic or composite components.
• Repair and rework stations — removing and reinstalling fasteners during inspection, adjustment, and component replacement.
• Bench and fixture assembly — supporting operators who need controlled torque with a stable P-handle grip and common 1/4" hex bit compatibility.

FAQs:

• Q: How is the 19PTA06Q different from faster 19 Series models?
  A: The 19PTA06Q has a 260 RPM free speed, so it runs down screws more slowly than higher-speed models in the same torque range. That slower speed can be helpful for careful screw starting, sensitive parts, or applications where the operator wants more control.
• Q: What does a Clecomatic shut-off clutch do?
  A: A Clecomatic shut-off clutch stops the screwdriver when the preset torque is reached. This helps improve fastening consistency and reduces the chance of over-tightening compared with tools that rely only on operator feel.
• Q: What bits fit this screwdriver?
  A: This model uses a 1/4" hex quick-change drive, which accepts standard 1/4" hex screwdriver bits used in assembly, maintenance, and repair operations.
• Q: Can the Cleco 19PTA06Q remove screws?
  A: Yes. The tool is reversible, so it can remove fasteners during rework, adjustment, repair, or disassembly tasks.
• Q: What air setup should be used with this screwdriver?
  A: Use a clean, regulated air supply at 90 PSI with a 3/8" minimum hose I.D. A properly sized filter-regulator-lubricator helps keep air pressure stable and protects the internal pneumatic components.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com