Cleco 19PTA04Q P-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 1,100 RPM | 0.8 - 3.3 (ft-lbs) Torque Range

Built for light assembly jobs that need more torque than high-speed, low-torque screwdrivers can provide, the Cleco 19PTA04Q P-Handle Pneumatic Screwdriver delivers controlled fastening in a compact trigger-start layout. Its 0.8 - 3.3 ft-lbs torque range supports small-to-medium production screws, threaded inserts, covers, brackets, and component fasteners, while the 1,100 RPM free speed provides a measured rundown rate for applications where torque capacity is more important than maximum speed.

Part of Cleco’s 19 Series, the 19PTA04Q uses a Clecomatic clutch, a torque shut-off clutch that stops the tool once the preset torque is reached. That shut-off action helps reduce over-tightening, stripped fasteners, and operator-to-operator variation in production fastening. The P-handle trigger-start configuration gives operators a natural way to apply forward force during rundown, especially when driving prevailing torque fasteners or working at bench-mounted assembly stations.

Type: P-Handle Pneumatic Screwdriver | Brand: Cleco | Model: 19PTA04Q | Series: 19 Series | Start Type: Trigger Start | Clutch Type: Clecomatic Clutch | Drive: 1/4" Hex Quick Change | Torque Range: 0.8 - 3.3 ft-lbs / 10 - 40 in-lbs / 1.1 - 4.5 Nm | Free Speed: 1,100 RPM | Air Consumption: 11 SCFM | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Length: 8.0" | Weight: 1.41 lbs

Features:

• Clecomatic clutch provides torque shut-off control for repeatable fastening in production assembly.
• 1,100 RPM free speed supports controlled rundown on applications that require higher torque than faster 19 Series variants.
• P-handle configuration helps operators apply forward pressure when seating prevailing torque fasteners.
• Trigger start provides familiar pistol-style activation for line, bench, and fixture-based workstations.
• 1/4" hex quick-change drive allows fast screwdriver bit changes during repeated fastening tasks.
• Reverse lever can be rotated to accommodate left- or right-handed operation.
• Easy-access torque verification port supports routine torque checks and process control.
• Supplied with operating instructions, service manual, suspension bail, and torque springs required to meet the indicated torque specification.

Applications:

• Appliance and equipment assembly — fastening covers, panels, housings, brackets, and light structural components where shut-off torque helps maintain consistency.
• Automotive component production — installing trim hardware, module fasteners, light brackets, clips, and interior assembly screws.
• Aerospace and precision manufacturing — controlled screwdriving on small assemblies where repeatability and torque verification support production quality.
• Electronics and electromechanical assembly — driving screws into inserts, frames, and enclosures that require more torque than the lowest-range tools provide.
• Maintenance and repair benches — removing and reinstalling small fasteners with reversible operation and quick bit changes.

FAQs:

• Q: What type of fastening work is the Cleco 19PTA04Q used for?
  A: The 19PTA04Q is used for repetitive low-to-medium torque screwdriving in production assembly. Its 0.8 - 3.3 ft-lbs torque range makes it suitable for small fasteners that need more torque than the faster, lower-range 19 Series models provide.
• Q: What does the Clecomatic clutch do?
  A: The Clecomatic clutch shuts the tool off when the preset torque is reached. This helps improve fastening repeatability and reduces the chance of over-tightening or stripping screws.
• Q: How does the 19PTA04Q compare with the 1,900 RPM 19PTA03Q?
  A: The 19PTA04Q runs slower at 1,100 RPM but provides a higher torque range. Choose it when the fastener requires more seating torque and the application does not require the fastest possible rundown speed.
• Q: What bits fit this screwdriver?
  A: This model uses a 1/4" hex quick-change drive, so it accepts compatible 1/4" hex screwdriver bits used in production screwdriving applications.
• Q: What air supply should be used with this tool?
  A: Use a compressed air system that can support the listed 11 SCFM air consumption, a 1/4" NPT inlet connection, and a 3/8" minimum hose I.D. Clean, regulated, lubricated air helps the screwdriver maintain consistent performance.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com