Cleco 19PTA02Q P-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 2,800 RPM | 0.4 - 1.5 (ft-lbs) Torque Range

Built for low-torque production fastening, the Cleco 19PTA02Q P-Handle Pneumatic Screwdriver gives assembly teams a fast, controlled tool for repetitive screwdriving on light threaded assemblies. The 0.4 - 1.5 ft-lbs torque range supports small fasteners that need repeatable clamp load without over-tightening, while the 2,800 RPM free speed helps shorten rundown time in high-volume work cells. Its trigger start gives familiar pistol-style control, and the P-handle layout lets the operator apply forward pressure when driving prevailing torque fasteners.

The 19PTA02Q is part of Cleco’s 19 Series pneumatic screwdriver line and uses a Clecomatic clutch, a torque shut-off clutch that stops the tool when the preset torque is reached. That shut-off action helps improve repeatability, reduce stripped screws, and support routine torque verification in production environments. A 1/4" hex quick-change drive accepts common screwdriver bits for fast bit swaps at the bench or assembly station.

Type: P-Handle Pneumatic Screwdriver | Brand: Cleco | Model: 19PTA02Q | Series: 19 Series | Start Type: Trigger Start | Clutch Type: Clecomatic Clutch | Drive: 1/4" Hex Quick Change | Torque Range: 0.4 - 1.5 ft-lbs / 5 - 19 in-lbs / 0.6 - 2.1 Nm | Free Speed: 2,800 RPM | Air Consumption: 11 SCFM | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Length: 8.0" | Weight: 1.41 lbs

Features:

• Clecomatic clutch provides torque shut-off control for repeatable fastening in production assembly.
• P-handle configuration helps the operator apply forward pressure when driving prevailing torque fasteners.
• Trigger start gives familiar pistol-style activation for bench, line, and fixture-based workstations.
• 1/4" hex quick-change drive allows fast bit changes without slowing the assembly process.
• Reverse lever can be rotated for left- or right-handed operation.
• Easy-access torque verification port supports routine torque checks and fastening process control.
• Available grip sizing helps match the tool to different operator preferences and hand sizes.
• Supplied with operating instructions, service manual, suspension bail, and torque springs required to meet the indicated torque specification.

Applications:

• Electronics and appliance assembly — driving small screws into housings, panels, brackets, and threaded inserts where repeatable low torque is required.
• Automotive interior and component assembly — installing trim, covers, clips, light brackets, and low-torque fasteners on production or repair benches.
• Aerospace and precision manufacturing — fastening light assemblies where torque verification and controlled shut-off support process consistency.
• General light manufacturing — repetitive screwdriving on fixtures, subassemblies, and bench-mounted workstations.
• Maintenance and repair benches — removing and reinstalling small fasteners with quick bit changes and reversible operation.

FAQs:

• Q: What type of fastening work is the Cleco 19PTA02Q best suited for?
  A: The 19PTA02Q is suited for low-torque, repetitive screwdriving in assembly environments. Its 0.4 - 1.5 ft-lbs torque range is intended for smaller fasteners rather than high-torque bolting.
• Q: What does the Clecomatic clutch do?
  A: The Clecomatic clutch shuts the tool off when the preset torque is reached. This helps improve fastening repeatability and reduces the chance of over-tightening small screws.
• Q: What bits fit this screwdriver?
  A: This model uses a 1/4" hex quick-change drive, so it accepts compatible 1/4" hex screwdriver bits commonly used in production screwdriving applications.
• Q: Why choose a P-handle screwdriver instead of a standard pistol grip?
  A: A P-handle lets the operator apply forward pressure more naturally during rundown. This can help when working with prevailing torque fasteners or when extra bit engagement pressure is needed.
• Q: What air setup does this tool require?
  A: Use a compressed air supply that can support the listed 11 SCFM air consumption, a 1/4" NPT inlet connection, and a 3/8" minimum hose I.D. A properly sized FRL also helps protect the tool and maintain consistent performance.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com