Cleco 19PTA07Q P-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 660 RPM | 1.2 - 5 (ft-lbs) Torque Range

Built for assembly stations that need more fastening torque without moving to a larger tool platform, the Cleco 19PTA07Q P-handle pneumatic screwdriver delivers a 660 RPM free speed with a 1.2 - 5 ft-lbs torque range for controlled run-down on machine screws, brackets, panel fasteners, appliance assemblies, and light mechanical components. The mid-speed configuration helps operators maintain production pace while still providing enough control for repeated fastening work.

This 19 Series model uses a trigger start throttle and Clecomatic shut-off clutch, a torque-control clutch that stops the tool when the selected torque is reached. That shut-off action helps reduce over-tightening and improves repeatability in production environments where the same fastener pattern may be installed throughout a shift. The P-handle layout gives the operator a centered grip for bench, fixture, and vertical fastening positions.

Type: P-Handle Pneumatic Screwdriver | Series: Cleco 19 Series | Model: 19PTA07Q | Start Type: Trigger Start | Clutch Type: Clecomatic Shut-Off Clutch | Drive Size: 1/4" Hex Quick Change | Free Speed: 660 RPM | Torque Range: 1.2 - 5 ft-lbs / 15 - 60 in-lbs / 1.7 - 6.8 Nm | Length: 8.4" | Weight: 1.50 lbs | Air Consumption: 11 SCFM | Air Inlet: 1/4" | Minimum Hose I.D.: 3/8" | Operating Pressure: 90 PSI

Features:

• Clecomatic shut-off clutch stops the tool at the selected torque setting to support consistent fastening results.
• Trigger start operation gives the operator direct control when starting screws, aligning bits, and managing repeat assembly tasks.
• 660 RPM free speed supports productive run-down on common assembly fasteners without excessive tool speed.
• 1.2 - 5 ft-lbs torque range covers higher-torque screwdriving applications within the Cleco 19 Series P-handle lineup.
• P-handle body style provides a stable grip for bench work, fixture-mounted parts, and vertical or horizontal fastening positions.
• 1/4" hex quick-change drive accepts standard production screwdriver bits for fast bit replacement between jobs.
• Reversible operation allows the tool to install fasteners and remove screws during rework, maintenance, or inspection.

Applications:

• Light manufacturing and production assembly — fastening brackets, covers, guards, and panels where repeat torque control is required.
• Appliance and equipment assembly — installing screws into frames, housings, trim panels, and subassemblies at a preset torque.
• Automotive interior and component work — controlled screwdriving on modules, non-structural brackets, and plastic or composite parts.
• Industrial maintenance and repair benches — removing and reinstalling screws during part replacement, inspection, and adjustment.
• Fixture and workstation fastening — supporting repetitive operations where the operator needs a stable P-handle grip and standard 1/4" hex bit compatibility.

FAQs:

• Q: What makes the 19PTA07Q different from lower-torque 19 Series models?
  A: The 19PTA07Q has a 1.2 - 5 ft-lbs torque range, giving it more fastening capacity than 0.8 - 3.7 ft-lbs models while keeping the same 660 RPM speed class. It is a better fit when the fastener or material requires a higher final torque setting.
• Q: What does the Clecomatic shut-off clutch do?
  A: The Clecomatic shut-off clutch stops the screwdriver when the preset torque is reached. This helps improve repeatability and reduces the chance of over-tightening compared with manually stopping the tool by feel.
• Q: What size bits does this screwdriver use?
  A: This model uses a 1/4" hex quick-change drive, which fits common 1/4" hex screwdriver bits used in production, maintenance, and assembly operations.
• Q: Can this screwdriver be used for screw removal?
  A: Yes. The 19PTA07Q is reversible, so it can remove screws during service, rework, inspection, and adjustment tasks.
• Q: What air supply does the Cleco 19PTA07Q require?
  A: Cleco rates this screwdriver for 90 PSI operation with a 3/8" minimum hose I.D. A clean, regulated air supply with a properly sized FRL helps maintain consistent torque performance and protects the tool.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com