Built for powered retrieval of larger-diameter hose, the Coxreels 1125-5-100-A Motor Rewind Hose Reel stores up to 100 feet of 3/4-inch I.D. hose and uses a compressed air motor to return the hose to the drum. This 1125 Series configuration suits service vehicles, plant maintenance stations, lubrication equipment, and machinery skids where a pneumatic supply is already available. Its 3,000 PSI maximum working pressure supports compatible air, water, oil, lubrication, and hydraulic fluid service when the separately installed hose, fittings, and accessories carry the required pressure and media ratings.
A direct gear drive transfers power from the air motor to the reel drum without a chain, supporting smooth and controlled hose retrieval. The low-profile outlet riser and open drum slot help the larger 3/4" hose form a flat wrap instead of bending sharply near the connection point. Permanently lubricated self-aligning pillow block bearings promote steady drum rotation, while an adjustable tension brake helps limit free-wheeling during payout. The one-piece welded steel A-frame provides a rigid mounting platform for mobile and stationary installations.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Method: Compressed Air Motor | Drive: Direct Gear Drive | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 100 ft | Max Pressure: 3,000 PSI | Swivel Inlet: 3/4" Female NPT | Outlet Riser: 3/4" Female NPT | Weight: 50 lbs | Overall Dimensions: 23.38" W x 18.75" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base Dimensions: 17.38" X x 16" Y
Features:
- Compressed air motor provides powered hose retrieval where a compatible pneumatic supply is available.
- Direct gear drive supports smooth and quiet rewind without a chain-drive mechanism.
- One-piece, all-welded steel A-frame creates a rigid mounting platform for vehicle and stationary installations.
- Machined solid brass 90° full-flow NPT swivel with nitrile seals supports efficient fluid transfer and serviceable seal replacement.
- Low-profile outlet riser and open drum slot promote a flat, non-crimping hose wrap during payout and retrieval.
- Permanently lubricated self-aligning bearings and an adjustable tension brake support smooth, controlled drum movement.
Made in USA: 
Applications:
- Industrial maintenance departments managing large-diameter air, water, oil, or compatible fluid hose.
- Mobile lubrication and hydraulic service equipment equipped with a compressed-air supply.
- Fleet, construction, and agricultural service vehicles requiring powered hose retrieval.
- Manufacturing workstations supplying compatible fluids to machinery and production equipment.
- Equipment skids and service trailers where 100 feet of 3/4-inch hose provides the required flow and reach.
FAQs:
- Q: Does the Coxreels 1125-5-100-A include hose?
A: No. This model is supplied as a reel only. Install a compatible 3/4-inch I.D. hose with an outside diameter no greater than 1-1/4 inches and suitable pressure, temperature, bend-radius, and media ratings. - Q: What does the A suffix indicate?
A: The A suffix identifies the compressed air motor rewind configuration. The pneumatic motor powers the direct gear drive so the hose can be retrieved without manual cranking. - Q: How does this model differ from a 1/2-inch 1125 Series reel?
A: This model accommodates 3/4-inch I.D. hose with an outside diameter up to 1-1/4 inches. The larger hose can support greater fluid volume, but compatibility depends on the system flow, pressure, fittings, and application requirements. - Q: Can this reel operate at the full 3,000 PSI rating?
A: Yes, provided the installed hose, fittings, connectors, and every other component in the fluid path are rated for the intended working pressure. The completed assembly is limited by its lowest-rated component.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-100 | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100 | 4,500 | 42 | 7 |
| 1125-5-100-A | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-A | 4,500 | 42 | 7 |
| 1125-5-100-AB | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-AB | 4,500 | 42 | 7 |
| 1125-5-100-C | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-C | 4,500 | 42 | 7 |
| 1125-5-100-E | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-E | 4,500 | 42 | 7 |
| 1125-5-100-EA | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EA | 4,500 | 42 | 7 |
| 1125-5-100-EB | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EB | 4,500 | 42 | 7 |
| 1125-5-100-ED | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-ED | 4,500 | 42 | 7 |
| 1125-5-100-EF | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EF | 4,500 | 42 | 7 |
| 1125-5-100-H | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-H | 4,500 | 42 | 7 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
