When a hose must be stored safely and retracted without manual cranking, the Coxreels 1125-5-100-EB provides motorized rewind capability for service trucks, washdown stations, lubrication equipment, pressure wash setups, and industrial fluid transfer points. This 1125 Series reel is configured with an electric 24V DC 1/2 HP motor rewind, giving mobile and equipment-mounted systems powered retraction without relying on shop air. The reel supports 3/4" I.D. hose up to 100 ft and is rated for 3000 PSI, making it suitable for medium-pressure hose handling where clean storage, controlled rewind, and installation footprint matter.
The 1125 Series uses a one-piece welded steel 'A' frame, low-profile outlet riser, open drum slot, and direct gear drive motor system to help guide hose onto the drum with a flat, non-crimping wrap. The 26" width and 17.63" overall length help buyers confirm mounting space before ordering, while the less hose configuration allows the reel to be matched with the specific hose construction, fluid compatibility, and end fittings required for the job.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: 1125 Series | Model: 1125-5-100-EB | Configuration: Less Hose | Motor: 24V DC 1/2 HP | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 100 ft | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 68 lbs | Overall Dimensions: 26" W x 18.75" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y
Features:
- Electric 24V DC 1/2 HP motor rewind helps retract long hose runs on mobile equipment, service trucks, and fixed workstations without hand cranking.
- Direct gear drive motor system provides smooth powered retraction with no chain drive to maintain or adjust.
- One-piece, all-welded steel 'A' frame construction gives the reel a stable mounting base for shop, skid, trailer, and truck installations.
- Low-profile outlet riser and open drum slot design help the hose wrap flat across the drum to reduce kinking and pinch points during rewind.
- Machined 90° full-flow NPT swivel supports hose installation and seal service without removing the reel from its mount.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation during repeated hose payout and rewind cycles.
- Adjustable tension brake helps prevent free-wheeling during operation, while the long-handled locking pin secures the reel during transport or storage.
- Rolled edges and ribbed discs add strength and help protect the hose as it is stored on the drum.
Made in USA: 
Applications:
- Service trucks and mobile equipment where 24V DC power is available and powered hose rewind reduces manual handling.
- Pressure washing and washdown stations using compatible 3/4" hose within the reel's 3000 PSI pressure rating.
- Lubrication, oil transfer, and maintenance fluid delivery systems requiring a controlled hose storage point.
- Fleet, utility, and municipal maintenance operations that need hose stored securely during transport between jobsites.
- Industrial MRO areas where long hose runs need organized payout, rewind, and storage near pumps, tanks, or equipment bays.
FAQs:
- Q: What does 'less hose' mean on the Coxreels 1125-5-100-EB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose separately, selected for the fluid, pressure, temperature, and end fittings required by the application. - Q: Is this a hand crank reel or a powered rewind reel?
A: This model is a motor rewind hose reel. The EB suffix indicates an electric 24V DC 1/2 HP motor configuration, so it is intended for powered retraction rather than manual crank rewind. - Q: Can this reel be mounted on a service truck?
A: Yes, this 24V DC configuration is commonly suited to mobile equipment and service truck installations when the mounting structure, power supply, hose, and pressure requirements match the reel specifications. - Q: What pressure range does this reel support?
A: The 1125-5-100-EB is rated for 3000 PSI. Do not exceed the reel pressure rating, and always choose hose and fittings rated for the same or higher working pressure. - Q: Does the motor rewind control hose speed automatically?
A: The reel provides powered rewind, but hose control still depends on the installation, operator control setup, hose weight, and application. Use proper guarding, guides, and operating procedures to manage hose payout and rewind safely.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-100 | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100 | 4,500 | 42 | 7 |
| 1125-5-100-A | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-A | 4,500 | 42 | 7 |
| 1125-5-100-AB | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-AB | 4,500 | 42 | 7 |
| 1125-5-100-C | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-C | 4,500 | 42 | 7 |
| 1125-5-100-E | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-E | 4,500 | 42 | 7 |
| 1125-5-100-EA | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EA | 4,500 | 42 | 7 |
| 1125-5-100-EB | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EB | 4,500 | 42 | 7 |
| 1125-5-100-ED | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-ED | 4,500 | 42 | 7 |
| 1125-5-100-EF | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-EF | 4,500 | 42 | 7 |
| 1125-5-100-H | 3/4" | 1 1/4" | 100 | 1/2" | 7/8" | 200 | 3/4" F NPT | 3,000 | HP1125-5-100-H | 4,500 | 42 | 7 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
