Coxreels HP1125-5-100-E Electric 12V DC 1/3 HP Motor Rewind Hose Reel | HP1125 Series | 3/4" Hose Diameter | 100' Hose Length | 4500 Max PSI | Less Hose

When high-pressure hose needs to stay organized on a truck, washdown skid, service bay, or mobile equipment package, the Coxreels HP1125-5-100-E provides motorized rewind convenience in a compact HP1125 Series reel. This model is built for 3/4" I.D. hose with a 100 ft hose capacity, giving operators practical reach for hydraulic, water, spraying, lubrication, and pressure-wash style layouts while keeping hose off the floor and easier to manage between uses. Its 4500 PSI maximum pressure rating supports high-pressure service when paired with a compatible hose, fittings, and fluid system.

The 12V DC, 1/3 HP electric rewind motor is useful for vehicle-mounted and remote power applications where manual cranking is slower or less practical. As a motorized HP1125 Series reel, it uses Coxreels' all-welded steel 'A' frame, low-profile outlet riser, open drum slot, and direct gear drive rewind system to help guide the hose into a flatter, smoother wrap during retraction.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Configuration: Less Hose | Motor: 12V DC, 1/3 HP, Reversible | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 100 ft | Max Pressure: 4500 PSI | Ship Weight: 55 lbs | Overall Dimensions: 26" W x 19.25" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y

Features:

• 12V DC, 1/3 HP reversible electric motor rewind helps reduce hand cranking on service trucks, skids, and remote-use equipment packages.
• External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet helps route fluid through the reel while allowing drum rotation.
• AFLAS swivel seals support high-pressure fluid handling within the manufacturer's stated reel limits.
• All welded steel 'A' frame construction provides a rigid reel base for floor, bench, wall, or vehicle mounting layouts.
• Exclusive low-profile outlet riser and open drum slot design help promote a flat, smooth hose wrap and reduce hose crimping during rewind.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation without routine bearing lubrication.
• Adjustable tension brake helps prevent free-wheeling during hose payout and rewind control.
• Reliable direct gear drive on motor driven models provides quiet, smooth retraction without a chain drive.

Made in USA:

2 Year Warranty

Applications:

• Hydraulic and grease service setups where 4500 PSI reel capacity and 3/4" hose compatibility are required.
• Pressure washing, jetting, and washdown systems using properly rated hose, fittings, and fluid components.
• Mobile service trucks, trailers, and skid-mounted packages that benefit from 12V DC electric rewind.
• Industrial maintenance and MRO areas where hose storage, floor safety, and faster rewind are priorities.
• Agricultural, pest control, and spraying operations requiring controlled hose payout and organized storage between jobs.

FAQs:

• Q: What does 'less hose' mean on the HP1125-5-100-E?
  A: It means the reel is supplied without hose installed. The buyer must provide a compatible 3/4" I.D. hose rated for the pressure, temperature, fluid, and fitting requirements of the system.
• Q: Is this reel hand crank or electric rewind?
  A: This model uses a 12V DC, 1/3 HP reversible electric rewind motor. The motor assists with retracting the hose, which is useful on vehicle-mounted and remote equipment where 12V DC power is available.
• Q: Can this reel be used at 4500 PSI?
  A: Yes, the reel is rated for 4500 PSI maximum pressure. The complete system is only as safe as its lowest-rated component, so the hose, fittings, swivel, and fluid path must all be selected for the application.
• Q: What mounting space should be planned for this reel?
  A: The overall dimensions are 26" wide x 19.25" high x 17.63" long. The mounting pattern is 15.44" x 10", and the base footprint is 17.38" x 16".
• Q: What applications fit the HP1125 Series?
  A: Coxreels lists the HP1125 Series for high-pressure applications such as grease/hydraulics, jetting, oil/lubrication, pressure washing, spraying operations, washdown, water, and pest control when the reel configuration matches the system requirements.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com