When hose management needs to stay organized around high-pressure compressed air service, the Coxreels HP1125-5-175-A provides motorized rewind convenience in a high-capacity HP1125 Series reel. This model is configured for 3/4" hose I.D. with 175 ft hose capacity, giving shops, service bays, and industrial maintenance areas enough reach to route air hose across larger work zones while keeping hose off the floor when the job is done. The 4500 PSI maximum pressure rating supports demanding high-pressure applications when paired with compatible hose, fittings, and system components.
The HP1125-5-175-A uses a compressed air motor rewind configuration with a 4-vane aluminum body air motor, allowing powered retrieval instead of manual hand cranking. Coxreels' all welded steel 'A' frame construction, low profile outlet riser, open drum slot, and direct gear drive help the reel wrap hose smoothly and reduce the risk of kinks, snags, and uneven hose buildup during daily use.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motorized Hose Reel | Brand: Coxreels | Series: HP1125 Series | Model: HP1125-5-175-A | Rewind Type: Compressed Air Motor Rewind | Motor: 4 Vane Aluminum Body Air Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 175 ft | Max Pressure: 4500 PSI | Inlet Swivel / Outlet Riser: 3/4" F NPT | Swivel: Electroless Nickel Plated Steel 90° Full-Flow NPT Swivel Inlet | Swivel Seals: AFLAS | Ship Weight: 58 lbs | Overall Dimensions: 29.38" W x 18.75" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- Compressed air motor rewind helps retrieve long hose runs without manual cranking, reducing handling time around service bays and work areas.
- All welded steel 'A' frame construction provides a rigid reel base for stationary mounting and repeated hose pull-out and rewind cycles.
- Exclusive low profile outlet riser and open drum slot design supports a flat, smooth hose wrap and helps reduce hose crimping during storage.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure fluid routing through the reel.
- AFLAS swivel seals are used on HP prefix models for compatibility with the reel's high-pressure configuration.
- Permanently lubricated self-aligning pillow block bearings support smooth reel rotation with reduced routine bearing maintenance.
- Adjustable tension brake helps prevent free-wheeling during operation, giving the user more control over drum movement.
- Reliable direct gear drive on motor driven models provides smooth, quiet retraction without a chain drive.
Made in USA: 
Applications:
- Industrial compressed air stations: Managing long high-pressure hose runs where powered rewind helps keep aisles, work cells, and service zones organized.
- Fleet and equipment maintenance: Routing compatible air hose around trucks, trailers, machinery, and maintenance bays while reducing loose hose on the floor.
- Manufacturing and plant MRO: Supplying compressed air to fixed work areas where hose storage, reach, and controlled rewind are important for daily upkeep tasks.
- Service shops and repair facilities: Supporting high-pressure air delivery points where a 175 ft hose capacity provides extended coverage from one mounted reel location.
- Mobile or mounted service systems: Storing and retrieving hose on service equipment when reel rotation must be controlled during transport or storage.
FAQs:
- Q: What does 'less hose' mean on the HP1125-5-175-A?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose separately and confirm that the hose, fittings, and system pressure match the application. - Q: What does the 'A' suffix mean on this Coxreels model?
A: The 'A' suffix identifies the air motor rewind option with a 4-vane aluminum body air motor. This allows powered hose retrieval using compressed air rather than a hand crank or electric motor. - Q: Can this reel be used for shop air service?
A: Yes, when the reel's pressure rating, hose size, swivel connection, and selected hose are compatible with the shop air system. Always verify working pressure and connection requirements before installation. - Q: Does this reel include the hose shown in product images?
A: No. This model is a less-hose reel, so images may show a representative hose reel assembly but the hose is not included with this SKU. - Q: What mounting dimensions should be checked before ordering?
A: Confirm the available space against the 29.38" W x 18.75" H x 17.63" L overall dimensions and the 21.44" M x 10" N mounting pattern. This helps prevent fit issues on benches, skids, service trucks, or wall-mounted structures.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-175 | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175 | 4,500 | 50 | 8 |
| 1125-5-175-A | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-A | 4,500 | 50 | 8 |
| 1125-5-175-AB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-AB | 4,500 | 50 | 8 |
| 1125-5-175-C | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-C | 4,500 | 50 | 8 |
| 1125-5-175-E | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-E | 4,500 | 50 | 8 |
| 1125-5-175-EA | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EA | 4,500 | 50 | 8 |
| 1125-5-175-EB | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EB | 4,500 | 50 | 8 |
| 1125-5-175-ED | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-ED | 4,500 | 50 | 8 |
| 1125-5-175-EF | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-EF | 4,500 | 50 | 8 |
| 1125-5-175-H | 3/4" | 1 1/4" | 175 | 1/2" | 7/8" | 325 | 3/4" F NPT | 3,000 | HP1125-5-175-H | 4,500 | 50 | 8 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
