Coxreels HP1125-4-325-EB Electric 24V DC 1/2 HP Motor Rewind Hose Reel | HP1125 Series | 1/2" Hose Diameter | 325' Hose Length | 5000 Max PSI | Less Hose

Large 24-volt commercial vehicles, heavy construction equipment, and transit platforms that carry 5,000 PSI capable hose and need the maximum 325-foot reach of the HP1125 Series with automatic motorized retraction without AC infrastructure or a compressed air supply at the reel find the right combination in the Coxreels HP1125-4-325-EB. A 24V DC, 1/2 HP electric motor (a direct-current rewind drive with full 1/2 HP output connecting to a standard 24V vehicle or equipment battery system) pairs with a direct gear drive (no chain gears engage the drum directly for quiet, smooth retraction without chain stretch or lubrication intervals) to retract the maximum-capacity HP1125 Series drum automatically from existing 24V vehicle power. At 325 feet and 5,000 PSI, the 1/2 HP motor output provides the torque margin the heaviest drum in the HP1125 Series demands. A lighter 1/3 HP motor that handles shorter drums adequately faces more startup inertia at full 325-foot capacity, meaningfully, and the 1/2 HP provides the performance headroom to handle that load reliably across production retraction cycles. The electroless nickel plated steel 90° NPT swivel hardened for 5,000 PSI service pairs with AFLAS seals, CNC-spun ribbed discs, permanently lubricated pillow block bearings, and the all-welded 12-gauge steel A-frame to give the maximum-reach 24V HP1125 configuration the construction depth sustained field and facility use demands.

Type: Electric Motor Rewind Hose Reel | Series: HP1125 | Motor Type: 24V DC, 1/2 HP | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 325 | Hose Included: No | Max PSI: 5,000 | Max Temp (°F): 250 | Swivel: Electroless Nickel Plated Steel 90° NPT | Swivel Seals: AFLAS

Features

• 24V DC, 1/2 HP electric motor with direct gear drive connects directly to 24V vehicle or equipment battery systems; no AC outlet or compressed air supply required at the reel for automatic retraction of the 325-foot maximum-capacity HP1125 drum
• Full 1/2 HP motor output matched to the 325-foot drum's heavier startup inertia; provides the torque margin that the lighter 1/3 HP -EF variant cannot reliably deliver at maximum HP1125 Series drum capacity across production retraction cycles
• Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements across the full 325-foot capacity
• 325-foot maximum capacity the longest single-drum reach in the HP1125 Series at 5,000 PSI; 24V DC 1/2 HP motor integration suits large commercial vehicle platforms and 24V industrial infrastructure where maximum high-pressure hose reach and battery-powered automatic retraction are both required
• Electroless nickel plated steel 90° full-flow NPT swivel inlet hardened for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series models
• AFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile; rated to 250°F and suited to hydraulic fluid, petroleum, chemical, and high-pressure process service
• Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 325 feet of drum capacity
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
• Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
• Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation under the full weight of a loaded 325-foot drum
• Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty

Made in USA:

2 Year Warranty

Applications

• Large commercial vehicle & heavy equipment maximum high-pressure reach 24V heavy trucks, transit platforms, and large service vehicles carrying 5,000 PSI hose where 325 feet of reach from a single vehicle-mount reel covers the largest service areas and 1/2 HP motor output handles the maximum HP1125 drum load reliably
• Mobile hydraulic test & service 24V, extended reach 24V portable test units and service vehicles carrying 5,000 PSI hydraulic test hose where maximum 325-foot reach from a single reel station reduces equipment repositioning and the 1/2 HP motor provides reliable retraction of the fully loaded drum
• Oilfield & well service 24V mobile, maximum reach 24V trucks and skid-mounted units handling 5,000 PSI chemical injection and stimulation fluid lines where 325 feet of reach covers widely spaced service points and the 24V battery system powers both the reel and the connected service equipment
• Agricultural & large-scale field service 24V, high-pressure 24V tractors and self-propelled service units carrying 5,000 PSI fluid lines where 325 feet of HP1125-rated reach covers the full width of large fields or equipment facilities from a single vehicle-mounted reel station
• Fixed plant & facility installations with 24V DC infrastructure large-bay maintenance stations and test facilities running 24V DC power where 5,000 PSI service lines and maximum 325-foot hose reach from a single ceiling- or wall-mount reel are both required and 1/2 HP motor output suits high-cycle retraction at maximum capacity

FAQs

Q: What is the difference between the HP1125-4-325-EB and the HP1125-4-325-EF at 325-foot capacity?
A: Both are 24V DC motors on the maximum-capacity 325-foot HP1125 drum at 5,000 PSI, but the -EB is 1/2 HP and the -EF is 1/3 HP. On the 325-foot drum the heaviest retraction load in the HP1125 Series this difference is more consequential than on shorter drums. The 1/2 HP -EB provides the torque margin to start and retract the fully loaded drum reliably across repeated production cycles. The 1/3 HP -EF is adequate for lower-frequency retraction with straightforward mounting and minimal routing friction, but operates closer to its output ceiling on this drum size. For any high-cycle installation or application where the drum is consistently fully loaded at 325 feet, the 1/2 HP -EB is the appropriate choice.

Q: What is the difference between the HP1125-4-325-EB and the HP1125-4-100-EB?
A: The motor is identical 24V DC, 1/2 HP, direct gear drive. The difference is drum capacity and physical size. The 325-foot model is approximately 31.75 inches wide versus approximately 19.75 inches wide on the 100-foot model, with a different mounting bolt pattern (approximately 21.44 inches × 10 inches versus 9.44 inches × 10 inches). At 325-foot capacity, the heavier startup load means peak current draw at the 24V battery circuit is higher than on the 100-foot model confirm battery capacity, circuit fusing, and wiring gauge for the maximum-drum startup load before installation.

Q: What is the difference between the HP1125-4-325-EB and the standard 1125-4-325-EB?
A: Both use a 24V DC, 1/2 HP electric motor on the same basic chassis with direct gear drive. The difference is working pressure and swivel specification. The HP1125-4-325-EB is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-325-EB is rated to 3,000 PSI with a machined brass swivel and Nitrile seals. For 24V applications at or below 3,000 PSI, the standard 1125-4-325-EB is the more economical choice; for applications requiring up to 5,000 PSI, the HP1125-4-325-EB is required.

Q: What electrical connection does the 24V DC motor require on the 325-foot drum?
A: The motor connects to a 24V DC power source typically a vehicle battery system, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. On the 325-foot drum, the heavier startup load means peak current is higher than on shorter-capacity reels confirm current requirements, battery capacity, circuit fusing, and wiring gauge with a qualified electrician sized for both peak startup current and sustained retraction operation at maximum drum capacity before installation.

Q: Does the reel come with hose included?
A: No the HP1125-4-325-EB ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 325 feet. Coxreels recommends SAE 100R16 wire braid hose for HP1125 Series reels rated for hydraulic and high-pressure oil service at up to 5,000 PSI and 250°F. Use assemblies with fittings rated and crimped for high-pressure service, and verify hose OD does not exceed 7/8 inch to ensure correct drum wrap across the full 325-foot capacity.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com