Coxreels HP1125-4-325-C Bevel Geared Crank Hose Reel | HP1125 Series | 1/2" Hose Diameter | 325' Hose Length | 5000 Max PSI | Less Hose

Remote high-pressure installations at the maximum reach of the HP1125 Series oilfield field stations, off-grid hydraulic test points, mobile service trailers, and high-pressure water jetting operations without available power need a reel that handles 5,000 PSI across 325 feet and makes manual retraction of that full drum load practical for a single operator. The Coxreels HP1125-4-325-C uses a front bevel geared crank (a mechanism where angled gears redirect the operator's cranking force and provide a gear ratio that distributes the effort of winding 325 feet of 1/2-inch hose across more handle rotations at reduced force per turn, making the maximum-capacity drum manageable by hand without the sustained physical output that a direct shaft crank demands at this scale) on the HP1125 Series high-pressure frame electroless nickel plated steel 90° NPT swivel rated for 5,000 PSI service, AFLAS seals for heat and chemical resistance to 250°F, and the all-welded 12-gauge steel A-frame. A removable crank handle keeps the reel profile unobstructed when hose is deployed, and the long-handled locking pin secures the drum solid during transport, storage, or any fixed-extension use. For the installations where 5,000 PSI capability, 325-foot reach, and complete power independence must all coexist in a single reel station, the bevel geared crank is what makes the combination viable as a hand-operated configuration.

Type: Bevel Geared Crank Hose Reel | Series: HP1125 | Crank Type: Front Bevel Geared, Removable Handle | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 325 | Hose Included: No | Max PSI: 5,000 | Max Temp (°F): 250 | Swivel: Electroless Nickel Plated Steel 90° NPT | Swivel Seals: AFLAS

Features

• Front bevel geared crank with removable smooth round handle gear ratio reduces the force required per handle rotation to make retraction of the 325-foot maximum-capacity HP1125 drum practical by hand; no external power source required
• Removable crank handle stores cleanly when hose is deployed and prevents accidental drum engagement during operation
• Long-handled locking pin locks and secures the drum from rotation during storage, transport, and fixed-extension use including mobile applications over rough terrain at high-pressure service sites
• Electroless nickel plated steel 90° full-flow NPT swivel inlet hardened swivel construction rated for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series models
• AFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile; rated to 250°F and suited to hydraulic fluid, petroleum, chemical injection, and high-pressure process service
• Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 325 feet of drum capacity
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
• Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, ceiling, floor, or vehicle-body installation
• Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation over extended service life
• Adjustable tension brake prevents free-wheeling during hose deployment; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty

Made in USA:

2 Year Warranty

Applications

• Remote oilfield & well service maximum reach field installations for 5,000 PSI chemical injection lines, stimulation fluid hose, and high-pressure service at remote sites without electrical or air supply, where 325 feet of reach reduces equipment repositioning across large production pads
• Mobile high-pressure service trailers extended capacity service trailers and portable units carrying 5,000 PSI capable hose where 325 feet of reach provides maximum operational flexibility across remote job sites and the absence of external power makes the bevel geared crank the practical retraction method
• Field hydraulic test stations off-grid remote pressure testing of hydraulic components at up to 5,000 PSI where 325 feet of hose reach covers the full test area from a single off-grid reel station and retraction frequency is low enough for manual operation
• High-pressure water jetting remote field operations field jetting operations above 3,000 PSI at sites without power infrastructure, where 325 feet of HP1125-rated hose capacity covers the largest remote surface areas from a single self-contained reel station
• Large agricultural & rural high-pressure service remote farm locations and rural facilities handling 5,000 PSI fluid lines where no power source is available at the reel mounting point, 325 feet of reach covers the full service area, and retraction frequency is low enough that bevel geared crank operation is practical

FAQs

Q: What is the practical difference between the HP1125-4-325-C (bevel geared crank) and the HP1125-4-325 (direct hand crank) at this drum size?
A: At 325 feet of 1/2-inch hose on a 5,000 PSI capable drum, the difference between geared and ungeared manual retraction is meaningful in practice. The direct crank transfers operator effort to the drum at a one-to-one ratio maximum simplicity, but no mechanical advantage on the heaviest manual drum in the HP1125 Series. The bevel geared crank uses angled gears to reduce the force required per handle rotation, trading more rotations for less force per turn making the full 325-foot retraction manageable by a single operator without the sustained output a direct crank demands at this scale. For any installation where the reel retracts more than a few times per use period, the bevel geared -C is the more practical choice. The direct crank HP1125-4-325 suits the lowest-frequency use cases where maximum mechanical simplicity is the priority.

Q: What is the difference between the HP1125-4-325-C and the standard 1125-4-325-C?
A: Both use the same bevel geared crank mechanism on the same basic chassis. The difference is working pressure and swivel specification. The HP1125-4-325-C is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-325-C is rated to 3,000 PSI with a machined brass swivel and Nitrile seals. For applications at or below 3,000 PSI, the standard 1125-4-325-C is the more economical choice; for applications requiring up to 5,000 PSI, the HP1125-4-325-C is required.

Q: Why choose the bevel geared crank over a motorized HP1125-4-325 variant at 5,000 PSI?
A: The primary reason is power independence. Motorized variants #4 Gast (-A), #6 Gast (-AB), 12V DC (-E), 24V DC (-EF, -EB), 115V AC (-EA), and explosion-proof (-ED, -EB where applicable) all require a power source at the reel location: compressed air, DC battery, or AC circuit. At remote field locations, off-grid service trailers, and installations where running any power supply to the reel mount is impractical, the bevel geared crank provides reliable retraction with nothing except the operator. The tradeoff at 325-foot capacity is retraction effort the bevel gear reduces this significantly over the direct crank, but neither matches motorized retraction for ease. Choose the -C when power is unavailable or undesirable and retraction frequency per shift is low to moderate.

Q: Can the crank handle be removed while the hose is under 5,000 PSI pressure?
A: No never remove the handle while the hose carries pressurized fluid. At 5,000 PSI working pressure, removing the crank handle while the line is pressurized creates a serious safety hazard. Always fully depressurize the hose line before removing the crank handle for storage or deployment.

Q: Does the reel come with hose included?
A: No the HP1125-4-325-C ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 325 feet. Coxreels recommends SAE 100R16 wire braid hose for HP1125 Series reels rated for hydraulic and high-pressure oil service at up to 5,000 PSI and 250°F. Use assemblies with fittings rated and crimped for high-pressure service. At 325 feet, loaded hose weight increases the cranking effort compared to a partially loaded drum factor this into operator workload planning for your specific application.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com