Coxreels 1125-4-325-EB Electric 24V DC 1/2 HP Motor Rewind Hose Reel | 1125 Series | 1/2" Hose Diameter | 325' Hose Length | 3000 Max PSI | Less Hose

Large 24-volt commercial vehicles, transit platforms, and industrial facilities with 24V DC infrastructure that need the maximum hose reach of the 1125 Series 325 feet of 1/2-inch hose from a single automatic reel station get both the reach and the motor output to handle it from the Coxreels 1125-4-325-EB. A 24V DC, 1/2 HP electric motor (a direct-current rewind drive with full 1/2 HP output, connecting to a standard 24V vehicle or equipment battery system and delivering automatic drum retraction without a shop air supply or AC outlet at the reel) pairs with direct gear drive (no chain gears engage the drum directly for quiet, smooth retraction without chain stretch or lubrication intervals) to retract the heaviest drum load in the standard 1125 Series. At the 325-foot capacity, the 1/2 HP output is the appropriate motor choice a lighter-output motor that performs adequately on 100-foot drums faces significantly more startup inertia on a fully loaded 325-foot drum, and the higher output provides the torque margin that sustained retraction of maximum-capacity hose loads demands. The machined solid brass 90° NPT swivel, CNC-spun ribbed discs, permanently lubricated pillow block bearings, and the all-welded 12-gauge steel A-frame bring full 1125 Series production construction to the maximum-reach 24V motorized configuration in the series.

Type: Electric Motor Rewind Hose Reel | Series: 1125 | Motor Type: 24V DC, 1/2 HP | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 325 | Hose Included: No | Max PSI: 3,000 | Swivel: Machined Solid Brass 90° NPT | Swivel Seals: Nitrile | Width (in.): 31.75 | Height (in.): 19.25 | Length (in.): 17.63 | Mounting Pattern M (in.): 21.44 | Mounting Pattern N (in.): 10 | Base X (in.): 23.38 | Base Y (in.): 16

Features

• 24V DC, 1/2 HP electric motor with direct gear drive connects directly to 24V vehicle or equipment battery systems; no AC outlet or compressed air supply required at the reel for automatic drum retraction of the 325-foot maximum-capacity drum
• Full 1/2 HP motor output matched to the 325-foot drum's heavier startup inertia and sustained retraction load; provides the torque margin that lighter-output motors cannot reliably deliver at maximum 1125 Series drum capacity
• Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements across the full 325-foot capacity
• 325-foot maximum capacity the longest single-drum reach in the standard 1125 Series for 1/2-inch ID hose, covering large facilities, long bays, and wide vehicle service areas from a single 24V-powered reel station
• Machined solid brass 90° full-flow NPT swivel inlet standard on 1/2" and 3/4" 1125 Series models; no need to remove the reel from its mount for seal maintenance or hose installation
• Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 325 feet of drum capacity
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
• Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
• Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation under the full weight of a loaded 325-foot drum
• Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty

Made in USA:

2 Year Warranty

Applications

• Large commercial vehicle & transit fleet maintenance extended-length service bodies and large transit maintenance facilities on 24V systems where 325 feet of automatic hose retraction from a single overhead or wall-mount station covers the full service area without secondary reel stations
• Heavy construction equipment service vehicles 24V service trucks and mobile maintenance units where maximum hose reach from a single vehicle-mounted reel covers wide equipment yards and large job site service areas
• Large agricultural & rural facility operations 24V tractors and self-propelled service units where 325 feet of hose reach covers the full width of large equipment sheds or field service areas and automatic 24V retraction eliminates manual crank operation between uses
• Municipal & utility fleet large-bay facilities bus depots, refuse vehicle maintenance centers, and utility fleet facilities running 24V DC infrastructure where a single 325-foot overhead reel replaces multiple shorter-reach stations across the full bay length
• Fixed plant & industrial facilities with 24V DC infrastructure large-bay manufacturing plants, warehouse MRO stations, and maintenance facilities where 24V DC power is in place and 325 feet of hose capacity from a single ceiling-mount reel serves the full floor area

FAQs

Q: Why is the 1/2 HP motor particularly important on the 325-foot drum compared to smaller drums?
A: A fully loaded 325-foot drum carries significantly more hose weight than a 100-foot or 200-foot drum, and that weight must be overcome at motor startup on every retraction cycle. A lighter-output motor that handles a 100-foot drum adequately faces a startup inertia load on the 325-foot drum that can cause slow retraction, motor strain, or premature motor wear. The 1/2 HP motor provides the torque margin to start and complete the retraction smoothly under maximum drum load, cycle after cycle.

Q: What is the difference between the 1125-4-325-EB and the 1125-4-100-EB?
A: The motor is identical 24V DC, 1/2 HP, direct gear drive. The difference is drum capacity and physical size. The 325-foot model is 31.75 inches wide versus approximately 19.75 inches wide on the 100-foot model roughly 12 inches wider. The mounting bolt pattern differs: 21.44 inches × 10 inches on the 325-foot model versus 9.44 inches × 10 inches on the 100-foot model. For circuit sizing, also note that the 325-foot drum's heavier startup load draws higher peak current from the 24V battery circuit than the 100-foot model size fusing and wiring accordingly.

Q: What is the difference between the 1125-4-325-EB (24V DC electric) and the 1125-4-325-AB (#6 Gast air motor) at 325-foot capacity?
A: Both provide automatic drum retraction on the maximum-capacity 325-foot 1125 Series drum but draw from different power sources. The -EB motor runs on 24V DC from a vehicle or equipment battery no air supply needed at the reel, suited to mobile 24V platforms and facilities with 24V DC infrastructure. The -AB motor runs on compressed air from your shop air supply no electrical connection needed at the reel, suited to fixed installations where shop air is already available at the mount point. The reel frame, pressure rating, swivel, and drum capacity are identical; the choice is determined entirely by which power source is available and preferred at the installation location.

Q: What electrical connection and circuit sizing does the 24V DC motor require on the 325-foot drum?
A: The motor connects to a 24V DC power source typically a vehicle battery system, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. On the 325-foot drum, the heavier startup load means peak current draw at motor startup is higher than on smaller drums confirm current requirements, circuit fusing, and wiring gauge with a qualified electrician sized for both peak startup current and sustained retraction operation before installation.

Q: Does the reel come with hose included?
A: No the 1125-4-325-EB ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 325 feet. Select hose rated for your working pressure and media (air, water, oil, or other compatible fluids at up to 3,000 PSI) and install it on the drum before use. At 325 feet, loaded hose weight adds substantially to the total reel weight factor this into the mounting structure load calculation for wall and ceiling installations.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com