Coxreels HP1125-4-325-E Electric 12V DC 1/3 HP Motor Rewind Hose Reel | HP1125 Series | 1/2" Hose Diameter | 325' Hose Length | 5000 Max PSI | Less Hose

Mobile service trucks, portable hydraulic test units, and 12-volt field equipment that carry 5,000 PSI capable hose and need the maximum 325-foot reach of the HP1125 Series with automatic retraction powered from the vehicle battery without a shop air supply or AC outlet at the reel find that combination in the Coxreels HP1125-4-325-E. A 12V DC, 1/3 HP electric motor (a direct-current rewind drive connecting to a standard 12V vehicle or equipment battery system, delivering automatic drum retraction of the maximum-capacity HP1125 drum without any external power infrastructure at the reel) pairs with direct gear drive (no chain gears engage the drum directly for quiet, smooth retraction without chain stretch or lubrication intervals) on the HP1125 Series high-pressure frame. The electroless nickel plated steel 90° NPT swivel hardened for 5,000 PSI service over the brass swivel on standard 1125 models pairs with AFLAS seals for the chemical and heat resistance that high-pressure hydraulic, petroleum, and chemical service demands across 325 feet of 1/2-inch hose. At this drum capacity on a 12V system, circuit sizing deserves particular attention: a fully loaded 325-foot drum carries substantially more startup inertia than shorter drums, and a 12V motor draws higher current than a 24V motor for equivalent power output. Confirm fusing, wiring gauge, and battery capacity for the heavier startup load of the maximum-capacity drum before installation.

Type: Electric Motor Rewind Hose Reel | Series: HP1125 | Motor Type: 12V DC, 1/3 HP | Drive: Direct Gear Drive (No Chain) | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 325 | Hose Included: No | Max PSI: 5,000 | Max Temp (°F): 250 | Swivel: Electroless Nickel Plated Steel 90° NPT | Swivel Seals: AFLAS

Features

• 12V DC, 1/3 HP electric motor with direct gear drive connects directly to 12V vehicle or equipment battery systems; no shop air supply or AC outlet required at the reel for automatic retraction of the 325-foot maximum-capacity drum
• Direct gear drive no chain or sprocket; engages the drum directly for quiet, smooth retraction without chain slack, stretch, or lubrication requirements across the full 325-foot capacity
• 325-foot maximum capacity the longest single-drum reach in the HP1125 Series; 12V DC motor integration suits mobile platforms and field installations where the vehicle's existing battery system powers both the reel and the equipment it serves
• Electroless nickel plated steel 90° full-flow NPT swivel inlet hardened swivel construction rated for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series models
• AFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile; rated to 250°F and suited to hydraulic fluid, petroleum, chemical injection, and high-pressure service environments
• Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 325 feet of drum capacity
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
• Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or ceiling installation
• Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation under the full weight of a loaded 325-foot drum
• Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty

Made in USA:

2 Year Warranty

Applications

• Mobile hydraulic test & service vehicles maximum reach 12V trucks and portable test units carrying 5,000 PSI hydraulic test hose where 325 feet of reach from a single vehicle-mount reel covers the largest test areas and automatic 12V retraction replaces manual crank operation between tests
• Oilfield & well service extended-reach mobile operations 12V service trucks and field units handling 5,000 PSI chemical injection lines and stimulation fluid hose where 325 feet of reach reduces vehicle repositioning across large production pads and 12V DC motor integration draws from the vehicle's existing electrical architecture
• High-pressure washing & jetting 12V mobile platforms 12V trucks and trailers operating water jetting and pressure washing above 3,000 PSI where 325 feet of HP1125-rated reach covers maximum-distance service areas and automatic retraction from the vehicle battery reduces operator handling time
• Agricultural & field service high-pressure, maximum reach 12V tractors and self-propelled service units handling 5,000 PSI fluid lines where 325 feet of reach covers the full width of large fields or equipment facilities from a single vehicle-mounted reel station
• Fixed installations with 12V DC infrastructure maintenance stations and test facilities running 12V DC power where 5,000 PSI service lines and maximum hose reach from a single ceiling- or wall-mount reel are both required and the 12V motor integrates into existing DC infrastructure

FAQs

Q: What is the difference between the HP1125-4-325-E and the HP1125-4-100-E?
A: The motor is identical 12V DC, 1/3 HP, direct gear drive. The difference is drum capacity and physical size. The 325-foot model is approximately 31.75 inches wide versus approximately 19.75 inches wide on the 100-foot model, with a different mounting bolt pattern. More critically at 12V: the fully loaded 325-foot drum carries significantly more startup inertia than the 100-foot drum, and a 12V motor delivering 1/3 HP draws higher peak current than a 24V motor at the same output the combination means the startup current on the 325-foot drum at 12V is the highest of any -E configuration in the HP1125 Series. Size the battery circuit, fusing, and wiring gauge accordingly before installation.

Q: What is the difference between the HP1125-4-325-E (12V DC) and the HP1125-4-325-EF (24V DC)?
A: Both are 1/3 HP non-explosion-proof reversible motors on the maximum-capacity 325-foot HP1125 drum at 5,000 PSI the power output and pressure rating are identical. The difference is supply voltage and the resulting current characteristics. The -E runs on 12V DC and draws approximately twice the current of a 24V motor for the same 1/3 HP output on the 325-foot drum's heavy startup load, this means higher peak current from a 12V battery system than the -EF draws from a 24V system. Choose the -E when the vehicle or equipment runs a 12V system; choose the -EF when the platform runs 24V. If the vehicle runs 24V, the -EF is preferable at this drum size for the lower current draw on the battery circuit.

Q: What is the difference between the HP1125-4-325-E and the standard 1125-4-325 motorized models?
A: The HP1125-4-325-E uses a 12V DC electric motor for automatic retraction and is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-325 motorized models are rated to 3,000 PSI with a machined brass swivel and Nitrile seals. Beyond the pressure and swivel differences, the electric 12V motor integration suits mobile 12V platforms that the standard 1125 Series air motor variants do not address. For fixed installations at or below 3,000 PSI, standard 1125 Series motorized models are the more economical choice; for 5,000 PSI applications on 12V mobile platforms, the HP1125-4-325-E is required.

Q: What electrical connection and battery capacity does the 12V DC motor require on the 325-foot drum?
A: The motor connects to a 12V DC power source typically a vehicle battery, auxiliary battery, or DC power supply. Coxreels does not publish the exact amperage draw for this motor. On the 325-foot drum, the heavy startup load and the current-amplifying effect of 12V (versus 24V at the same HP) make battery capacity and circuit sizing more critical than on smaller drums or higher-voltage variants. Confirm current requirements, fusing, and wiring gauge with a qualified electrician sized for both peak startup current and sustained retraction operation on the maximum-capacity drum before installation.

Q: Does the reel come with hose included?
A: No the HP1125-4-325-E ships less hose. The drum accepts 1/2" ID / 7/8" OD hose up to 325 feet. Coxreels recommends SAE 100R16 wire braid hose for HP1125 Series reels rated for hydraulic and high-pressure oil service at up to 5,000 PSI and 250°F. Use assemblies with fittings rated and crimped for high-pressure service, and verify hose OD does not exceed 7/8 inch to ensure correct drum wrap across the full 325-foot capacity.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com