Coxreels 1175-6-200-H Hydraulic Motor Rewind Hose Reel | 1175 Series | 1" Hose Diameter | 200' Hose Length | 3000 Max PSI | Less Hose

largest equipment in the field long-reach excavators, large offshore cranes, wide-deck marine vessels, and extended logging machinery often operates far from any electrical panel or compressed air supply, but always has hydraulic power available at the attachment point. When that equipment also needs 200 feet of hose reach from a single reel station, the Coxreels 1175-6-200-H delivers it. The maximum-capacity 1175 Series drum carries a hydraulic motor (a fluid-power-driven rewind drive with end-ported 9/16-18 UNF O-ring boss fittings the SAE straight-thread port standard found on most mobile hydraulic circuits that integrates directly into the machine's existing hydraulic system) and chain and sprocket drive, handling 200 feet of 1-inch ID hose at 3,000 PSI with the same power source that runs the machine's cylinders and implements. At this capacity, a single reel station can cover bay widths, deck spans, and field service distances that would otherwise require hose extensions, junction points, or multiple shorter-reach reels. The all-welded 12-gauge steel A-frame, CNC-spun ribbed discs, AFLAS swivel seals, and permanently lubricated pillow block bearings scale the 1175 Series construction to the demands of the heaviest duty-cycle application in the range.

Type: Hydraulic Motor Rewind Hose Reel | Series: 1175 | Motor Type: Hydraulic, End Ported | Motor Port: 9/16-18 UNF O-Ring Boss (ORB) | Drive: Chain & Sprocket | Hose I.D. (in.): 1 | Hose O.D. (in.): 1-7/16 | Hose Length (ft.): 200 | Hose Included: No | Max PSI: 3,000 | Max Temp (°F): 250 | Swivel Seals: AFLAS | Inlet Swivel: 1" F NPT 90° | Outlet Riser: 1" F NPT | Width (in.): 34.5 | Height (in.): 26.13 | Length (in.): 24 | Mounting Pattern M (in.): 23.31 | Mounting Pattern N (in.): 13.75 | Base X (in.): 25.5 | Base Y (in.): 20.13 | Approx. Weight (lbs.): 89

Features:

• Hydraulic motor with end-ported 9/16-18 UNF O-ring boss connections taps the machine's existing hydraulic circuit for retraction power with no electrical wiring or compressed air supply required at the reel
• Chain & sprocket drive transfers hydraulic motor torque to the drum for smooth, consistent retraction across the full 200-foot hose load the heaviest retraction duty in the 1175 Series
• 200-foot maximum capacity the longest single-drum reach in the 1175 Series, covering large equipment yards, wide offshore decks, and extended bay lengths from a single hydraulic-powered reel station
• AFLAS swivel seals on the nickel-plated steel 90° full-flow NPT swivel inlet rated to 250°F with broad chemical resistance; no need to remove the reel from its mount for seal maintenance or hose installation
• Exclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 200 feet of drum capacity
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safety
• Sturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, vehicle-body, or overhead installation
• Permanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation under the full weight of a loaded 200-foot drum
• Adjustable tension brake prevents free-wheeling during hose deployment; long-handled locking pin secures drum during transport or storage
• Long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer's limited warranty

Made in USA:

2 Year Warranty

Applications:

• Large offshore cranes & marine deck machinery vessels and platforms where a single deck-mount reel must supply tools or fluid across wide open areas at 200 feet of reach, powered by the ship's existing hydraulic system with no electrical dependency
• Logging & forestry operations large forwarders, feller bunchers, and skidders with hydraulic circuits already routed to the reel mounting position, where 200 feet of reach covers wide cutting areas or large log yards from a single fixed point
• Large construction equipment service & maintenance extended-boom cranes, large excavators, and heavy off-highway equipment where the reel integrates into the machine's hydraulic manifold and covers the full service reach without running separate electrical or air infrastructure
• Mining & tunneling equipment large underground machinery and surface mining vehicles where hydraulic power is consistently available at the reel location, classified-area constraints may make electric motors impractical, and 200 feet of reach covers wide maintenance bays or long haul corridors
• Agricultural & irrigation operations large self-propelled equipment and tractor-mounted service units with hydraulic remotes available at the reel point, where 200 feet of reach covers the full width of large equipment sheds or field service areas without additional power infrastructure

FAQs:

• Q: When should I choose the 200-foot -H over the 135-foot -H?
  A: The hydraulic motor, port type, and frame construction are identical between the two lengths the choice is purely about reach and physical size. Choose the 200-foot model when the installation requires more than 135 feet of hose from a single fixed point: a larger deck, a wider equipment yard, or an extended bay where a 135-foot drum would require a hose extension to reach the work area. Note that the 200-foot drum is meaningfully larger 26.13 inches tall and 24 inches deep versus 22.875 inches tall and 20 inches deep on the 135-foot model. Confirm mounting clearances and structural load capacity before ordering.
• Q: Does the larger 200-foot drum require more hydraulic flow or pressure to retract than the 135-foot model?
  A: A fully loaded 200-foot drum carries significantly more hose weight than a 135-foot drum, which increases the torque demand on the hydraulic motor at retraction startup. Coxreels does not publish specific GPM or pressure requirements for the hydraulic rewind motor on either drum size. Before installation on the 200-foot model, contact Coxreels directly to confirm the motor's flow and pressure requirements and verify that your machine's available hydraulic output including flow rate at the auxiliary circuit and system pressure under load is sufficient to retract the maximum drum weight reliably.
• Q: Why use a hydraulic motor on a 200-foot reel rather than an electric or air motor?
  A: On equipment where hydraulic power is already available at the reel mounting point cranes, large excavators, marine deck machinery, forestry equipment a hydraulic motor eliminates the need to run a separate electrical circuit or compressed air line to the reel. On a 200-foot drum in particular, where the retraction load is at its heaviest in the 1175 Series, having a continuously available hydraulic power source with consistent torque output is a practical advantage over air motors that may lose pressure under sustained load or battery-powered DC motors that may draw high startup current on a full drum.
• Q: What fitting type connects the hydraulic supply and return lines to the motor?
  A: The motor uses end-ported 9/16-18 UNF O-ring boss (ORB) fittings the SAE straight-thread port standard common on mobile hydraulic equipment. ORB fittings seal on a soft O-ring compressed at the port face rather than relying on thread sealant, making them leak-resistant and compatible with standard mobile hydraulic hose assemblies. "End ported" means both the supply and return ports are on the end face of the motor housing, which simplifies plumbing in confined mounting locations.
• Q: Does the reel come with hose included?
  A: No the 1175-6-200-H ships less hose. The drum accepts 1" ID / 1-7/16" OD hose up to 200 feet. Select hose rated for your working pressure, media, and temperature (up to 3,000 PSI and 250°F) and install it on the drum before use. At 200 feet, hose selection also affects the total loaded weight of the reel factor hose weight into the structural load calculation for wall, ceiling, or overhead mounting.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com