Cleco 19TTA04Q T-Handle Pneumatic Screwdriver | 19 Series | Trigger Start | 1,100 RPM | 0.8 - 3.3 (ft-lbs) Torque Range

Built for assembly stations that need higher torque coverage without moving into a larger fastening platform, the Cleco 19TTA04Q T-Handle Pneumatic Screwdriver delivers a 1,100 RPM free speed and a 0.8 - 3.3 ft-lbs torque range for controlled installation of machine screws, brackets, housings, and small production fasteners. The lower speed compared with higher-RPM 19 Series models gives the tool more usable torque capacity for applications where a fast rundown must still finish with repeatable tightening. It's a 1/4" quick change output that accepts compatible hex bits for quick bit changes at the workstation.

The 19TTA04Q uses Cleco’s CLECOMATIC clutch, a precision shut-off clutch that stops the tool when the preset torque is reached to help reduce over-tightening and improve repeatability. The T-handle configuration supports a balanced grip for vertical and bench-mounted fastening work, while trigger start operation gives the user familiar throttle control during repetitive production assembly, repair, and subassembly tasks.

Type: Pneumatic Screwdriver | Brand: Cleco | Model: 19TTA04Q | Series: 19 Series | Handle Style: T-Handle | Start Type: Trigger Start | Clutch Type: CLECOMATIC Clutch | Output: 1/4" Quick Change | Torque Range: 0.8 - 3.3 ft-lbs / 10 - 40 in-lbs / 1.1 - 4.5 Nm | Torque Range with Standard Spring: 10 - 38 in-lbs / 1.1 - 4.3 Nm | Free Speed: 1,100 RPM | Overall Length: 7.9" / 199 mm | Weight: 1.54 lbs / 0.7 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Air Consumption: 11 SCFM

Features:

• CLECOMATIC clutch provides controlled shut-off when the preset torque is reached.
• 1,100 RPM free speed supports steady screw rundown where higher torque capacity is required.
• Trigger start operation gives operators direct control during bench and production-line fastening.
• T-handle configuration helps balance the tool during vertical fastening, fixture work, and repetitive assembly tasks.
• 1/4" quick change output accepts compatible hex bits for fast bit changes between applications.
• Reverse lever can be rotated to accommodate left- or right-handed operators.
• Includes the springs needed to cover the advertised torque range and a suspension bail for supported workstations.

Made in USA:

Applications:

• Production assembly — controlled fastening of machine screws, covers, small brackets, and hardware in repetitive work cells.
• Appliance and equipment manufacturing — installing panels, housings, frames, and internal assemblies that require consistent torque.
• Automotive interior and component assembly — fastening trim parts, light brackets, plastic components, and small subassemblies.
• Aerospace and electronics subassembly — tightening smaller fasteners where controlled shut-off helps protect threads and components.
• Repair benches and rework stations — removing and reinstalling screws during service, inspection, and product correction work.

FAQs:

• Q: What is the torque range of the Cleco 19TTA04Q?
  A: The full tool torque range is 10 - 40 in-lbs, equal to 0.8 - 3.3 ft-lbs or 1.1 - 4.5 Nm. With the standard spring, the listed range is 10 - 38 in-lbs or 1.1 - 4.3 Nm.
• Q: When should I choose the 19TTA04Q instead of a faster 19 Series screwdriver?
  A: Choose the 19TTA04Q when the application needs more torque capacity than the higher-speed models provide. Its 1,100 RPM speed is slower than the 1,900 RPM and 2,800 RPM models, but it covers a higher torque range for more resistant fastening jobs.
• Q: What does the CLECOMATIC clutch do?
  A: The CLECOMATIC clutch shuts the tool off when the preset torque is reached. This helps improve fastening repeatability and reduces the chance of over-tightening small screws or damaging threaded parts.
• Q: What bit style does this screwdriver use?
  A: The 19TTA04Q uses a 1/4" quick change output for compatible 1/4" hex screwdriver bits. Match the bit profile and size to the screw head to reduce cam-out and fastener wear.
• Q: Is this screwdriver intended for wood screws or construction fastening?
  A: No. This is a controlled pneumatic assembly screwdriver for production fastening and machine screw applications. Wood screws, deck screws, and general construction fasteners usually require a different tool type with higher driving force.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com