United Abrasives Cartridge Roll Mandrel | 95108 | 1/8" Shank Diameter | 3/4" Pilot Length

When small cartridge rolls need a correctly sized mounting accessory for detailed metal finishing, the United Abrasives 95108 Cartridge Roll Mandrel provides a compact connection between the abrasive and a compatible rotary tool. Featuring a 1/8" shank diameter, 3/32" pilot diameter, and 3/4" pilot length, this mandrel is intended for straight and full taper cartridge rolls with corresponding mounting requirements. The pilot is the projecting portion that supports the abrasive roll, while the shank fits into the tool's collet. Its small pilot diameter makes it a mounting option for appropriately sized cartridge rolls used in narrow grooves, recessed features, and other areas where larger abrasive accessories may be difficult to position.

The United Abrasives 95108 is distinguished from other cartridge roll mandrels in the manufacturer's lineup by its 3/32" pilot diameter and smaller 1/8" shank. This combination is particularly important when selecting a mandrel for tools equipped with smaller collets. Its 3/4" pilot length provides the specified support configuration for compatible cartridge rolls, while the compact dimensions accommodate detailed abrasive finishing setups. Supplied as one mandrel per unit, the 95108 can serve as a replacement or additional mounting accessory for machine shops, toolrooms, and maintenance workshops performing localized metal finishing and deburring.

Type: Cartridge Roll Mandrel | Part Number: 95108 | Pilot Diameter: 3/32" | Pilot Length: 3/4" | Shank Diameter: 1/8" | Compatible Abrasive Types: Straight and Full Taper Cartridge Rolls | Quantity: 1 Mandrel

Features:

• Cartridge roll mandrel intended for mounting compatible straight and full taper abrasive rolls.
• 3/32" pilot diameter provides the mounting size required by cartridge rolls specified for this smaller arbor configuration.
• 3/4" pilot length accommodates compatible cartridge rolls requiring a short mounting pilot.
• 1/8" shank diameter allows installation in a rotary tool equipped with a matching collet and suitable operating specifications.
• Compact mounting dimensions support the use of appropriately sized cartridge rolls for detail sanding and deburring.
• Provides a replaceable mounting connection, allowing compatible worn abrasive rolls to be changed while retaining the mandrel.
• Supplied individually for replacement, additional tool setups, and workshop abrasive accessory inventory.

Applications:

• Precision machining - Mounting compatible small cartridge rolls for removing burrs and refining accessible grooves, recesses, and machined edges.
• Tool and die workshops - Supporting detailed abrasive finishing of small metal contours and confined workpiece features.
• Metal fabrication - Holding appropriately sized cartridge rolls for localized surface blending and edge finishing.
• Component repair and refurbishment - Preparing compatible rotary tools for sanding small metal features during repair operations.
• General metalworking workshops - Replacing mandrels used with small cartridge rolls for detail finishing and surface preparation.

FAQs:

• Q: What is the United Abrasives 95108 Cartridge Roll Mandrel used for?
  A: The 95108 mounts compatible straight and full taper cartridge rolls on a suitable rotary tool. It provides the connection needed to use these abrasives for localized deburring, sanding, and finishing. The mandrel itself does not contain abrasive material.
• Q: What makes mandrel 95108 different from the other United Abrasives cartridge roll mandrels?
  A: The 95108 has a 3/32" pilot diameter, 3/4" pilot length, and 1/8" shank diameter. Other mandrels in the 95101-95107 range use 1/4" shanks and different pilot dimensions. This makes the 95108 a distinct option for cartridge rolls and tools requiring smaller mounting sizes.
• Q: Will the 95108 fit a die grinder with a 1/4" collet?
  A: The 95108 has a 1/8" shank and is intended for a compatible 1/8" collet. It should not be clamped directly in an oversized 1/4" collet. Always confirm the tool's accessory mounting requirements before installation.
• Q: Can any cartridge roll with a 3/32" arbor hole be used with mandrel 95108?
  A: Matching the arbor hole is only one part of selecting the correct mandrel. The cartridge roll must also be suitable for the 3/4" pilot length and the manufacturer's recommended mounting arrangement. Verify the exact abrasive part number before use.
• Q: Does United Abrasives 95108 include abrasive cartridge rolls?
  A: The manufacturer lists part number 95108 with a quantity of one mandrel. Cartridge rolls are separate abrasive products and should be selected according to their dimensions, grit, and mounting requirements.

Looking for more information about United Abrasives Mandrel? Click here to view the Catalog

For help choosing the correct United Abrasives Mandrels for your application, please call (800) 608-5210 or email info@intlairtool.com