Ingersoll Rand W1A1 Heavy-Duty Chipping Hammer is designed for demanding chipping, scaling, and demolition applications requiring dependable pneumatic performance in industrial environments. Equipped with a 1" stroke, 2,500 blows per minute, and a 0.58" hex shank, this W-Series hammer delivers rapid, controlled impacts for removing concrete, weld slag, rust, and mill scale. Its heavy-duty construction is intended for continuous use in fabrication shops, foundries, construction sites, and industrial maintenance operations.
The W1A1 features a swan-neck handle with an outside trigger for comfortable operation and improved control during extended use. A lock-spring retainer securely holds compatible 0.58" hex shank oval-collar accessories, while the replaceable piston helps simplify maintenance and supports long-term serviceability. The combination of a short stroke and high blow rate makes this model well suited for fast, controlled material removal and surface preparation.
Type: Heavy-Duty Chipping Hammer | Series: W-Series | Model: W1A1 | Shank Type: Hex | Shank Size: 0.58" | Retainer Type: Lock-Spring (Plain Arrow) | Stroke: 1" | Blows Per Minute: 2,500 BPM
Features:
- Heavy-duty W-Series construction is designed for continuous pneumatic chipping and scaling applications.
- 1-inch stroke delivers rapid, controlled impact for precision material removal.
- 2,500 blows per minute provides fast percussion for productive surface preparation and cleanup.
- Swan-neck handle with outside trigger offers comfortable operation and improved accessibility.
- Lock-spring retainer securely holds compatible 0.58-inch hex shank oval-collar accessories.
- Replaceable piston helps simplify maintenance and supports extended service life.
- Compatible with a variety of chisels and scaling tools designed for the W-Series retainer system.
Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)
Applications:
- Concrete chipping and light demolition.
- Rust, weld slag, and mill scale removal.
- Surface preparation before repair or coating.
- Foundry cleaning and casting finishing.
- Industrial maintenance, fabrication, and general material-removal operations.
FAQs:
- Q: What type of accessories does the Ingersoll Rand W1A1 accept?
A: The W1A1 is designed for compatible 0.58-inch hex shank tools with an oval collar used with the lock-spring retainer system. - Q: What applications is the W1A1 intended for?
A: It is suitable for concrete chipping, weld cleanup, rust and scale removal, foundry work, and general industrial surface-preparation applications. - Q: What advantage does the 1-inch stroke provide?
A: The short stroke combined with 2,500 BPM delivers rapid, controlled impacts that are well suited for precision chipping and scaling tasks. - Q: Is the piston replaceable?
A: Yes. The W-Series design incorporates a replaceable piston to simplify maintenance and support long-term serviceability. - Q: Can this hammer be used for continuous industrial work?
A: Yes. Its heavy-duty construction is intended for demanding industrial chipping and material-removal applications.
| SKU | Retainer Type | Stroke | Bore | Length Without Accessory | Weight Without Accessory | BPM | CFM | Inlet Size NPT | Recommended Hose Size |
|---|---|---|---|---|---|---|---|---|---|
| IN (MM) | IN (MM) | IN (MM) | LB (KG) | IN | IN (MM) | ||||
| A Series Industrial-Duty Chippers | |||||||||
| With .580” Hex Nozzle — For Use With (X4) Hex Shank Oval Collar Accessories | |||||||||
| 1A1SA | Standard | 1” (25) | 1.13” (28) | 15.5” (394) | 14.75 (6.69) | 2,500 | 28 | 3/8” | 1/2” (13) |
| 2A1SA | Standard | 2” (51) | 1.13” (28) | 16” (406) | 15.13 (6.86) | 2,300 | 28 | 3/8” | 1/2” (13) |
| 3A1SA | Standard | 3” (76) | 1.13” (28) | 17.88” (454) | 16.63 (7.54) | 1,725 | 29 | 3/8” | 1/2” (13) |
| 4A1SA | Standard | 4” (102) | 1.13” (28) | 18.88” (480) | 17.5 (7.94) | 1,480 | 29 | 3/8” | 1/2” (13) |
| With .680” Round Nozzle — For Use With (X4) Round Shank Oval Collar Accessories | |||||||||
| 1A2SA | Standard | 1” (25) | 1.13” (28) | 15.5” (394) | 14.75 (6.69) | 2,500 | 28 | 3/8” | 1/2” (13) |
| 2A2SA | Standard | 2” (51) | 1.13” (28) | 16” (406) | 15.13 (6.86) | 2,300 | 28 | 3/8” | 1/2” (13) |
| 3A2SA | Standard | 3” (76) | 1.13” (28) | 17.88” (454) | 16.63 (7.54) | 1,725 | 29 | 3/8” | 1/2” (13) |
| 4A2SA | Standard | 4” (102) | 1.13” (28) | 18.88” (480) | 17.5 (7.94) | 1,480 | 29 | 3/8” | 1/2” (13) |
| W Series Heavy-Duty Chippers | |||||||||
| With .580” Hex Nozzle — For Use With (X4) Hex Shank Round Collar Accessories | |||||||||
| W1A1 | Rubber-buffered | 1” (25) | 1.13” (28) | 15.88” (403) | 14.75 (6.69) | 2,500 | 28 | 3/8” | 1/2” (13) |
| W2A1 | Rubber-buffered | 2” (51) | 1.13” (28) | 16.38” (416) | 15.13 (6.86) | 2,300 | 28 | 3/8” | 1/2” (13) |
| W3A1 | Rubber-buffered | 3” (76) | 1.13” (28) | 18.25” (464) | 16.63 (7.54) | 1,725 | 29 | 3/8” | 1/2” (13) |
| W4A1 | Rubber-buffered | 4” (102) | 1.13” (28) | 19.25” (489) | 17.5 (7.94) | 1,480 | 29 | 3/8” | 1/2” (13) |
| With .680” Round Nozzle — For Use With (X4) Round Shank Round Collar Accessories | |||||||||
| W1A2 | Rubber-buffered | 1” (25) | 1.13” (28) | 15.88” (403) | 14.75 (6.69) | 2,500 | 28 | 3/8” | 1/2” (13) |
| W2A2 | Rubber-buffered | 2” (51) | 1.13” (28) | 16.38” (416) | 15.13 (6.86) | 2,300 | 28 | 3/8” | 1/2” (13) |
| W3A2 | Rubber-buffered | 3” (76) | 1.13” (28) | 18.25” (464) | 16.63 (7.54) | 1,725 | 29 | 3/8” | 1/2” (13) |
| W4A2 | Rubber-buffered | 4” (102) | 1.13” (28) | 19.25” (489) | 17.5 (7.94) | 1,480 | 29 | 3/8” | 1/2” (13) |
Looking for more information about Ingersoll Rand Chipping Hammer? Click here to view the Catalog
For help selecting the correct Ingersoll Rand Chipping Hammers, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
