Ingersoll Rand QA6AALS090NP43S08 Angle Air Nutrunner | QA6 Series | 1/2" Drive | 14.8 - 29.5 (ft-lbs) Torque Range | 175 - 185 RPM | Lever Start

Ingersoll Rand QA6AALS090NP43S08 Angle Air Nutrunner is configured for repetitive production fastening where controlled torque delivery and access around surrounding components are required. Part of the QA6 Series, this model features a 1/2" drive, 14.8–29.5 ft-lbs torque range, 175–185 RPM speed range, and lever start, providing a measured rundown rate with direct operator-controlled activation.

Ingersoll Rand QA6AALS090NP43S08 uses an angle-head configuration to help position compatible sockets on fasteners where frames, housings, fixtures, or neighboring parts can restrict straight-line tool access. Its 1/2" square drive accommodates compatible sockets, while the specified torque and speed ranges allow the tool to be matched to assembly processes within its rated fastening capability.

Type: Angle Air Nutrunner | Series: QA6 Series | Drive Size: 1/2" | Torque Range: 14.8–29.5 ft-lbs | Speed: 175–185 RPM | Start Type: Lever Start

Features: 1/2" square drive accepts compatible sockets for repetitive production fastening operations. 14.8–29.5 ft-lbs torque range supports assembly requirements within the tool's specified fastening capability. 175–185 RPM speed range provides a controlled fastener rundown rate for recurring assembly cycles. Lever-start configuration gives the operator direct control over tool activation during the fastening process. Angle-head layout helps position the socket where nearby components, fixtures, or equipment geometry restrict straight-line access. Pneumatic operation supports integration into compressed-air-powered production and assembly workstations. Made in USA:

Applications:

• Production assembly operations requiring fastening within the 14.8–29.5 ft-lbs torque range.
• Assembly stations where an angle-head tool helps reach fasteners located near housings, frames, fixtures, or adjacent components.
• Repetitive fastening processes using compatible 1/2" drive sockets and operator-controlled lever activation.
• Machinery, equipment, and fabricated-component assembly where the specified torque range and operating speed match the fastening process.

FAQs:

• Q: What torque range does the QA6AALS090NP43S08 provide?
  A: This model has a specified torque range of 14.8–29.5 ft-lbs.
• Q: What drive size does this QA6 Series angle nutrunner use?
  A: The QA6AALS090NP43S08 uses a 1/2" square drive for compatible sockets.
• Q: What is the specified operating speed range?
  A: This model has a specified speed range of 175–185 RPM.
• Q: How is the QA6AALS090NP43S08 activated?
  A: It uses lever-start operation, allowing the operator to control tool activation directly during each fastening cycle.
• Q: What should be verified before selecting this nutrunner?
  A: Confirm that the required fastening torque falls within the 14.8–29.5 ft-lbs range and that the 1/2" drive size, angle configuration, and available fastener access match the assembly requirements.

Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com