Ingersoll Rand QA6AALS055NP35S08 Angle Air Nutrunner | QA6 Series | 1/2" Drive | 18.4 - 40.6 (ft-lbs) Torque Range | 300 - 320 RPM | Lever Start

Ingersoll Rand QA6AALS055NP35S08 Angle Air Nutrunner is configured for repetitive production fastening where increased torque capability and access around surrounding components are required. Part of the QA6 Series, this model features a 1/2" drive, 18.4–40.6 ft-lbs torque range, 300–320 RPM speed range, and lever start, providing a controlled combination of fastening output and rundown speed for assembly processes within its specified range.

Ingersoll Rand QA6AALS055NP35S08 uses an angle-head configuration to help position the socket on fasteners where housings, fixtures, or adjacent components can restrict straight-line tool access. Its 1/2" square drive accepts compatible sockets, while lever-start operation gives the operator direct control over activation during each fastening cycle.

Type: Angle Air Nutrunner | Series: QA6 Series | Drive Size: 1/2" | Torque Range: 18.4–40.6 ft-lbs | Speed: 300–320 RPM | Start Type: Lever Start

Features: 1/2" square drive accepts compatible sockets for repetitive production fastening operations. 18.4–40.6 ft-lbs torque range supports assembly requirements within the tool's specified fastening capability. 300–320 RPM speed range provides a measured rundown rate for applications requiring this balance of torque and speed. Lever-start configuration allows direct operator control over tool activation during the fastening cycle. Angle-head layout helps reach fastening points where nearby components, fixtures, or equipment geometry limit straight-line access. Pneumatic operation supports integration into compressed-air-powered production and assembly workstations. Made in USA:

Applications:

• Production assembly operations requiring fastening within the 18.4–40.6 ft-lbs torque range.
• Assembly stations where an angle-head tool helps reach fasteners located near housings, frames, fixtures, or neighboring components.
• Repetitive fastening processes using compatible 1/2" drive sockets and operator-controlled lever activation.
• Machinery component, equipment, bracket, and fabricated-product assembly where the specified torque and speed ranges match process requirements.

FAQs:

• Q: What torque range does the QA6AALS055NP35S08 provide?
  A: This model has a specified torque range of 18.4–40.6 ft-lbs.
• Q: What drive size does this QA6 Series angle nutrunner use?
  A: The QA6AALS055NP35S08 uses a 1/2" square drive for compatible sockets.
• Q: What is the specified operating speed range?
  A: This model has a specified speed range of 300–320 RPM.
• Q: How is the QA6AALS055NP35S08 activated?
  A: It uses lever-start operation, allowing the operator to control tool activation directly during the fastening cycle.
• Q: What should be verified before selecting this model?
  A: Confirm that the required fastening torque falls within the 18.4–40.6 ft-lbs range and that the 1/2" drive size, angle configuration, and available access match the assembly requirements.

Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com