Ingersoll Rand QA6AALS070NP43S08 Angle Air Nutrunner | QA6 Series | 1/2" Drive | 25.8 - 51.6 (ft-lbs) Torque Range | 215 - 225 RPM | Lever Start

Ingersoll Rand QA6AALS070NP43S08 Angle Air Nutrunner is configured for production assembly operations that require a broader torque range and practical access to fasteners positioned around surrounding components. Part of the QA6 Series, this model features a 1/2" drive, 25.8–51.6 ft-lbs torque range, 215–225 RPM speed range, and lever start, providing controlled fastening capability for repetitive assembly processes within its specified range.

Ingersoll Rand QA6AALS070NP43S08 uses an angle-head configuration to help position compatible sockets on fasteners where frames, housings, fixtures, or adjacent parts can limit straight-line tool access. Its 1/2" square drive accommodates compatible sockets, while the lower operating speed provides a measured rundown rate suited to the model's higher torque capability.

Type: Angle Air Nutrunner | Series: QA6 Series | Drive Size: 1/2" | Torque Range: 25.8–51.6 ft-lbs | Speed: 215–225 RPM | Start Type: Lever Start

Features: 1/2" square drive accepts compatible sockets for repetitive production fastening operations. 25.8–51.6 ft-lbs torque range supports assembly requirements within the tool's specified fastening capability. 215–225 RPM speed range provides a measured fastener rundown rate for applications requiring this combination of torque and speed. Lever-start configuration gives the operator direct control over tool activation during each fastening cycle. Angle-head layout helps position the tool where nearby components, fixtures, or equipment geometry restrict straight-line access. Pneumatic operation supports integration into compressed-air-powered production and assembly workstations. Made in USA:

Applications:

• Production assembly operations requiring fastening within the 25.8–51.6 ft-lbs torque range.
• Machinery and equipment assembly where fasteners are located near frames, housings, fixtures, or neighboring components.
• Repetitive fastening processes using compatible 1/2" drive sockets and operator-controlled lever activation.
• Fabricated-component and structural subassembly work where the specified torque range, speed, and angle-head configuration match the fastening requirements.

FAQs:

• Q: What torque range does the QA6AALS070NP43S08 provide?
  A: This model has a specified torque range of 25.8–51.6 ft-lbs.
• Q: What drive size does this QA6 Series nutrunner use?
  A: The QA6AALS070NP43S08 uses a 1/2" square drive for compatible sockets.
• Q: What is the specified operating speed range?
  A: This model has a specified speed range of 215–225 RPM.
• Q: How is the QA6AALS070NP43S08 activated?
  A: It uses lever-start operation, allowing the operator to control tool activation directly during the fastening cycle.
• Q: What should be checked before selecting this angle air nutrunner?
  A: Confirm that the required fastening torque falls within the 25.8–51.6 ft-lbs range and that the 1/2" drive size, angle configuration, and available fastener access match the assembly requirements.

Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com