Ingersoll Rand QA6AALS040NP35S06 Angle Air Nutrunner | QA6 Series | 3/8" Drive | 14.8 - 29.5 (ft-lbs) Torque Range | 405 - 430 RPM | Lever Start

Ingersoll Rand QA6AALS040NP35S06 Angle Air Nutrunner is configured for repetitive production fastening where controlled torque and access around surrounding components are key considerations. Part of the QA6 Series, this model features a 3/8" drive, 14.8–29.5 ft-lbs torque range, 405–430 RPM speed range, and lever start, providing a controlled combination of fastening capability and rundown speed for assembly processes within its specified range.

Ingersoll Rand QA6AALS040NP35S06 uses an angle-head configuration to help position compatible sockets on fasteners where nearby parts or assembly geometry can limit straight-line tool access. Its 3/8" square drive supports compatible sockets, while lever-start operation gives the operator direct control over activation during each fastening cycle.

Type: Angle Air Nutrunner | Series: QA6 Series | Drive Size: 3/8" | Torque Range: 14.8–29.5 ft-lbs | Speed: 405–430 RPM | Start Type: Lever Start

Features: 3/8" square drive accepts compatible sockets for repetitive production fastening operations. 14.8–29.5 ft-lbs torque range supports assembly requirements within the tool's specified fastening capability. 405–430 RPM speed range provides a measured rundown rate for applications requiring this balance of torque and speed. Lever-start configuration allows the operator to control tool activation directly during the fastening cycle. Angle-head layout helps reach fastening points where adjacent components or fixtures restrict straight-line tool positioning. Pneumatic operation supports integration into compressed-air-powered production and assembly workstations. Made in USA:

Applications:

• Production assembly operations requiring fastening within the 14.8–29.5 ft-lbs torque range.
• Assembly stations where an angle-head tool helps access fasteners positioned near housings, frames, fixtures, or neighboring components.
• Repetitive fastening processes using compatible 3/8" drive sockets and operator-controlled lever activation.
• Machinery component, bracket, equipment, and fabricated-product assembly where the specified torque and speed ranges match the process requirements.

FAQs:

• Q: What torque range does the QA6AALS040NP35S06 provide?
  A: This model has a specified torque range of 14.8–29.5 ft-lbs.
• Q: What drive size does this QA6 Series angle nutrunner use?
  A: The QA6AALS040NP35S06 uses a 3/8" square drive for compatible sockets.
• Q: What is the specified speed range of this model?
  A: This angle air nutrunner has a specified speed range of 405–430 RPM.
• Q: How is the QA6AALS040NP35S06 activated?
  A: This model uses lever-start operation, giving the operator direct control over tool activation during the fastening process.
• Q: What should be checked before selecting this angle nutrunner?
  A: Confirm that the required fastening torque falls within the 14.8–29.5 ft-lbs range and that the 3/8" drive size, angle configuration, and available access match the assembly requirements.

Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com