Ingersoll Rand Q80PQ1 Pistol Grip Air Pulse Tool is engineered for repetitive production fastening applications that require smooth power delivery, fast bit changes, and comfortable handling throughout extended shifts. Featuring a pistol grip configuration, a non-shut-off clutch, 7,000 RPM free speed, and a 1/4" quick change drive, this pneumatic pulse tool utilizes an oil pulse mechanism to help reduce torque reaction while providing controlled fastening performance. Its quick change drive allows operators to replace compatible bits quickly, helping improve productivity in fast-paced assembly environments.
The Q80PQ1 is designed for industrial assembly operations where the operator controls the fastening cycle and efficiency is enhanced through rapid bit changes. Its pistol grip design promotes comfortable handling, while the high free speed supports demanding production schedules across a variety of manufacturing applications.
Type: Pistol Grip Pneumatic Pulse Tool | Model: Q80PQ1 | Clutch Type: Non-Shut-Off | Configuration: Pistol Grip | Free Speed: 7,000 RPM | Drive Type: 1/4" Quick Change
Features:
- Pistol grip configuration provides comfortable handling for repetitive fastening operations.
- Oil pulse mechanism helps minimize torque reaction, improving operator comfort during continuous production work.
- Non-shut-off operation allows the operator to control the fastening cycle according to application requirements.
- 1/4-inch quick change drive enables rapid bit replacement, helping reduce interruptions between fastening tasks.
- 7,000 RPM free speed supports efficient fastening cycles in high-volume manufacturing environments.
- Designed for assembly applications where quick tooling changes and smooth fastening performance contribute to productivity.
Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)
Made in USA: 
Applications:
- Electronics and electrical equipment manufacturing.
- Automotive component and subassembly production.
- Appliance manufacturing and light industrial assembly.
- Production lines requiring frequent bit changes for multiple fastening operations.
- General industrial assembly where reduced torque reaction improves operator comfort and control.
FAQs:
- Q: What is the advantage of the pistol grip design?
A: The pistol grip configuration provides a comfortable, ergonomic grip that helps improve handling during repetitive fastening applications. - Q: What does non-shut-off operation mean?
A: A non-shut-off pulse tool does not automatically stop at a preset torque. The operator determines when the fastening cycle is complete. - Q: What is the benefit of the 1/4-inch quick change drive?
A: It allows compatible bits to be changed quickly without additional tools, helping improve efficiency in production environments. - Q: What free speed does the Q80PQ1 operate at?
A: The catalog specifies a free speed of 7,000 RPM. - Q: Does the catalog specify the torque range, weight, air consumption, air inlet size, or operating pressure?
A: No. Those specifications were not confirmed in the provided source and have therefore been omitted.
| SKU | Fastener Size | Torque | Free Speed | Weight | Overall Length | Side to Center | Drive Size and Type | Air Consumption |
|---|---|---|---|---|---|---|---|---|
| ft-lbs (Nm) | rpm | lbs (kg) | in (mm) | in (mm) | in | cfm | ||
| Pistol | ||||||||
| 100PQ1 | M4 - M5 | 5.5 - 8 (7.5 - 11) | 9300 | 1.6 (0.7) | 5.6 (142) | 0.7 (18) | 1/4" Hex Quick-Change Drive | 12 |
| Q60P3 | M6 | 10 - 16 (13 - 22) | 4000 | 1.8 (0.8) | 5.1 (130) | 0.9 (22) | 3/8" Square Drive | 11 |
| Q60PQ1 | M6 | 8 - 15 (11 - 20) | 4000 | 1.8 (0.8) | 5.1 (130) | 0.9 (22) | 1/4" Hex Quick-Change Drive | 11 |
| Q70P3 | M6 - M8 | 18 - 25 (24 - 35) | 7000 | 1.8 (0.8) | 5.2 (131) | 0.9 (22) | 3/8" Square Drive | 11 |
| Q70PQ1 | M6 - M8 | 15 - 20 (20 - 28) | 7000 | 1.8 (0.8) | 5.2 (131) | 0.9 (22) | 1/4" Hex Quick-Change Drive | 12 |
| Q80PQ1 | M8 | 18 - 25 (24 - 35) | 7000 | 1.9 (0.9) | 5.4 (138) | 0.9 (22) | 1/4" Hex Quick-Change Drive | 12 |
| Q80P3 | M8 | 24 - 37 (34 - 50) | 7000 | 1.9 (0.9) | 5.4 (138) | 0.9 (22) | 3/8" Square Drive | 12 |
| Q90P3 | M8 - M10 | 35 - 48 (47 - 65) | 6500 | 2.1 (1.0) | 5.8 (148) | 0.9 (23) | 3/8" Square Drive | 14 |
| Q110P4 | M10 - M12 | 44 - 70 (60 - 95) | 5500 | 3.0 (1.4) | 6.5 (164) | 1.1 (27) | 1/2" Square Drive | 20 |
| Q120P4 | M12 | 70 - 95 (95 - 130) | 6600 | 3.7 (1.7) | 6.9 (175) | 1.3 (29) | 1/2" Square Drive | 20 |
| Q140P4 | M14 | 95 - 118 (130 - 160) | 5400 | 4.9 (2.2) | 7.5 (190) | 1.3 (33) | 1/2" Square Drive | 30 |
| 140P6 | M16 | 118 - 199 (160 - 270) | 3200 | 6.8 (3.1) | 8.9 (226) | 1.4 (36) | 3/4" Square Drive | 26 |
| 3000P | M16 - M18 | 170 - 258 (230 - 350) | 4700 | 10.1 (4.6) | 9.7 (246) | 1.6 (40) | 3/4" Square Drive | 10 |
| Inline | ||||||||
| 180SQ1 | M4 - M6 | 11 - 18 (15 - 24) | 9000 | 20 (0.9) | 8.7 (221) | 0.9 (22) | 1/4" Hex Quick-Change Drive | 9 |
| 280SQ1 | M6 - M8 | 15 - 23 (20 - 31) | 8000 | 21 (10) | 9.0 (229) | 0.9 (22) | 1/4" Hex Quick-Change Drive | 11 |
| 380SQ1 | M8 | 21 - 30 (29 - 40) | 8500 | 26 (1.2) | 9.1 (231) | 1.0 (25) | 1/4" Hex Quick-Change Drive | 11 |
| Angle | ||||||||
| 500A | M6 - M8 | 21 - 29 (29 - 39) | 7000 | 3.3 (1.5) | 10.5 (267) | 1.1 (27) | 3/8" Square Drive | 11 |
Looking for more information about Ingersoll Rand Pulse Tool? Click here to view the Catalog
For help selecting the correct Ingersoll Rand Pulse Tools for your assembly application, call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
