Coxreels 1125PCL-8M-H Hydraulic Rewind Cord Reel | 1125PCL Series | 200' (10/3) / 175' (8/3) Capacity | 45 Amps | 600 Volts | Less Cord

Built for long-run power cord handling on service trucks, construction sites, rail operations, and plant maintenance areas, the Coxreels 1125PCL-8M-H gives crews a controlled way to store and rewind bulk SO-type power cord without manually coiling heavy cable after each use. This 1125PCL Series hydraulic rewind cord reel is rated for 200 ft of 10/3 cord or 175 ft of 8/3 cord, giving buyers flexibility when matching reel capacity to conductor size, voltage drop requirements, and jobsite reach. The 45 amp, 600 volt, 3-pole slip ring supports high-capacity electrical service when the cord, application, and local code requirements are properly matched.

The hydraulic rewind configuration uses Coxreels motorized reel platform with a direct drive system for powered cord retrieval where hydraulic power is available. A drum-located slip ring assembly (the rotating electrical connection that transfers power from the stationary supply to the winding drum) is positioned behind an easy-access cover for routine service, while the all-welded steel 'A' frame and self-aligning pillow block bearings help the reel rotate smoothly under long cable loads.

Type: Hydraulic Rewind Cord Reel | Series: 1125PCL Series | Configuration: Less Cord | Model: 1125PCL-8M-H | Cord Capacity: 200 ft of 10/3 or 175 ft of 8/3 | Cord Grip Range: .63" - .75" | Voltage Rating: 600V | Slip Ring Rating: 45 Amps | Poles: 3 | Rewind Type: Hydraulic, end ported 9/16-18 UNF | Approx. Base Reel Weight: 35 lbs | Hydraulic Rewind Add-On Weight: approx. 6 lbs

Features:

• Hydraulic rewind helps retrieve long lengths of power cord without hand cranking, making the reel practical for mobile equipment, field service, and work zones where hydraulic power is already available.
• Drum-located slip ring assembly includes an easy-access cover, allowing routine inspection and service without removing the reel from its mounting location.
• 45 amp, 600 volt, 3-pole slip ring configuration supports higher-current power cord applications when the cord selection and end-use electrical requirements are properly matched.
• All-welded steel 'A' frame construction strengthens the reel structure for service vehicle mounting, facility installation, and repeated cord handling.
• Narrow-width reel design helps installers fit the reel into restricted spaces where wider cord storage systems may be difficult to mount.
• Permanently lubricated, self-aligning pillow block bearings promote smooth drum rotation as cord is pulled out or rewound.
• 'Cable Keeper' helps reduce lead cable whipping or twisting during operation.
• Adjustable tension brake helps prevent free-wheeling, while the long-handled locking pin secures the reel during transport or storage.

Made in USA:

2 Year Warranty

Applications:

• Service, mechanic, and utility vehicles where long power cord runs need to be stored neatly and rewound from a hydraulic source.
• Manufacturing plants and maintenance facilities using portable power tools, lighting, or temporary electrical drops within the reel's voltage and amp rating.
• Mining, construction, and railroad operations that require durable cord management for mobile work areas and outdoor equipment support.
• General industrial workstations where cord control helps reduce clutter, trip hazards, and time spent coiling cable manually.
• Fleet and field maintenance environments where a less-cord reel lets the buyer install the correct approved cord type and length for the application.

FAQs:

• Q: What does 'less cord' mean on the 1125PCL-8M-H?
  A: It means the reel is supplied without cord installed. The buyer must provide compatible cord separately, matching the reel capacity, conductor size, insulation type, voltage rating, and jobsite electrical requirements.
• Q: What cord sizes will this reel hold?
  A: This model is listed for 200 ft of 10/3 cord or 175 ft of 8/3 cord. Capacity depends on the cord outside diameter, so confirm the selected cord's O.D. before installation.
• Q: What is the benefit of a hydraulic rewind cord reel?
  A: Hydraulic rewind allows powered retrieval from a hydraulic source instead of manual cranking. It is useful on service trucks, mobile equipment, and industrial setups where long, heavy cord runs are difficult to rewind by hand.
• Q: Can the reel stay energized while cord is wound on the drum?
  A: Coxreels cautions that cord should be completely unspooled from the reel when energized unless applicable NEC ampacity derating factors are followed. The end user is responsible for matching the reel, cord, and service to all national and local electrical codes.
• Q: Does this reel include the plug, outlet end, or cord grips?
  A: The reel is supplied less cord, and user connections are made through the externally mounted outlet box. Cord, plug ends, fittings, and connection details should be selected by a qualified installer for the specific application.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com