Coxreels 1125-6-35-H Hydraulic Rewind Hose Reel | 1125 Series | 1" Hose Diameter | 35' Hose Length | 3000 Max PSI | Less Hose

For construction equipment, forestry machines, and agricultural tractors that already run a hydraulic system and need large-bore 1-inch hose management without adding electrical wiring or a shop air supply, the Coxreels 1125-6-35-H taps directly into the machine's existing hydraulic circuit to power automatic retraction of the compact 1-inch drum. The end-ported hydraulic motor (connecting via 9/16-18 UNF fittings the standard port thread on mobile equipment hydraulic lines) is the lightest motor option in the 1125-6-35 lineup at approximately 6 lbs added weight, and delivers quiet, chain-free direct gear retraction whenever the machine's hydraulic system is pressurized. The drum holds 35 feet of 1-inch I.D. hose at up to 3,000 PSI and 250°F for compressed air, water, and oil service. Because the hydraulic motor carries no electrical components, it is inherently spark-free a meaningful advantage near fuel transfer areas, grain handling environments, and petrochemical field sites where ignition risk makes electrical motors a certification burden. As standard on all 1125 Series 1-inch models, the swivel is nickel plated steel with AFLAS seals a fluoroelastomer compound particularly well-suited to hydraulic oil exposure, outperforming standard nitrile at elevated temperatures and pressures. Built on the CNC robotically welded 12-gauge steel "A" frame common to the 1125 family.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Hydraulic Motor Rewind Hose Reel | Series: 1125 | Motor Type: Hydraulic, End Ported | Motor Port Fitting: 9/16-18 UNF | Drive: Direct Gear (No Chain) | Hose I.D. (in.): 1 | Hose O.D. (in.): 1-7/16 | Hose Capacity (ft.): 35 | Hose Included: No | Max PSI: 3,000 | Max Temperature (°F): 250 | Inlet Swivel: 1 in. F NPT | Swivel Material: Nickel Plated Steel | Swivel Seals: AFLAS | Width (in.): 22.25 | Height (in.): 18.5 | Length (in.): 17.63 | Drum Width (in.): 9.5 | Mounting Pattern M (in.): 14.94 | Mounting Pattern N (in.): 10 | Base X (in.): 14.88

Features:

• Hydraulic end-ported motor with 9/16-18 UNF port fittings connects to existing mobile equipment hydraulic circuits for automatic retraction with no electrical wiring or air supply required
• Inherently spark-free operation no electrical components in the motor assembly, suited to fuel handling areas, grain dust environments, and petrochemical sites where ignition risk is a factor
• Lightest motor option in the 1125-6-35 lineup at approximately 6 lbs added weight minimal impact on overall reel footprint and machine payload
• Nickel plated steel 90° full-flow 1" NPT swivel with AFLAS seals standard on all 1125 Series 1-inch models; AFLAS fluoroelastomer seals are particularly well-suited to hydraulic oil exposure
• Reliable direct gear drive for quiet, chain-free retraction when the hydraulic system is pressurized
• Adjustable tension brake prevents free-wheeling during hose deployment for controlled line management
• Exclusive low profile outlet riser and open drum slot design provides non-crimping, flat smooth hose wrap to protect large-bore hose and extend service life
• One-piece CNC robotically welded 12-gauge steel "A" frame base (not bolted) with integrated mounting pattern for permanent or mobile installation
• CPC powder coat finish chip resistant and rust inhibiting for outdoor, field, and mobile environments

Made in USA:

2 Year Warranty

Applications:

• Construction equipment & earthmoving machinery 1-inch compressed air and water service drops on excavators, wheel loaders, and skid steers where the machine's hydraulic circuit powers retraction and no electrical or air infrastructure is available on site
• Forestry & logging machinery large-bore hose management on feller bunchers, forwarders, and log skidders operating in remote areas where hydraulic power is the only available motor source
• Agricultural equipment 1-inch water and chemical drops on large tractors, combines, and self-propelled sprayers with high-flow hydraulic systems in grain handling and field environments where spark-free operation matters
• Fuel & petroleum service vehicles spark-free hydraulic retraction on 1-inch air or fluid service lines aboard fuel delivery trucks and petrochemical field service vehicles where electrical motor certification is avoided entirely
• Remote job sites & field service any mobile installation where 12V/24V electrical power and shop air are both unavailable, but a hydraulic power take-off or auxiliary circuit is present and 1-inch bore flow is required

FAQs:

• Q: Why choose the hydraulic motor over the air motor options (-A or -AB) on the 1125-6-35?
  A: Choose the -H when the machine already has an active hydraulic circuit and shop air is unavailable at the installation point common on mobile construction, forestry, and agricultural equipment. The hydraulic motor is also inherently spark-free with no electrical components, making it the preferred option near fuel handling or in grain dust environments where electrical motor certification requirements are a concern. Air motors (-A, -AB) suit shops and vehicles with existing compressed air infrastructure.
• Q: What hydraulic supply pressure and flow does the motor require?
  A: Coxreels does not publish specific pressure and flow requirements for the -H motor in their standard catalog. Connect it to your existing hydraulic circuit using standard 9/16-18 UNF fittings, and consult Coxreels directly or your hydraulic system supplier to confirm compatibility with your machine's circuit before installation.
• Q: Does this reel come with hose?
  A: No sold less hose. The drum holds up to 35 feet of 1-inch I.D. (1-7/16-inch O.D. max) hose, or up to 50 feet of 3/4-inch I.D. hose with a reducer.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com