Cleco CCBAW503B CellCore Cordless Electric Nutrunner | 165 RPM | 11.1 - 36.8 (ft-lbs) Torque Range | 3/8" Square Drive

Built for higher-torque cordless assembly work, the Cleco CCBAW503B CellCore Cordless Electric Nutrunner delivers a 11.1 - 36.8 ft-lbs torque range with a controlled 165 RPM rundown speed for fastening jobs that need more torque than lighter CellCore models. Its 3/8" square drive with ball retainer helps keep sockets secured during repeated installation cycles, while the right-angle head gives assemblers better access to fasteners tucked inside housings, brackets, frames, and production fixtures.

The CCBAW503B belongs to Cleco’s CellCore cordless assembly platform, giving production teams programmable fastening control without routing an air hose or power cord across the station. The large on-tool user interface supports direct programming for up to 10 applications, while controller connectivity expands functionality with FastApps for more advanced rundown strategies. With Cmk > 2.0 +/- 10% accuracy, this tool is suited for quality-focused assembly environments where repeatable torque, cordless mobility, and right-angle access all factor into the fastening process.

Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.

Type: Cordless Electric Right Angle Nutrunner | Series: CellCore | Model: CCBAW503B | Torque Range: 15 - 50 Nm / 11.1 - 36.8 ft-lbs | Free Speed: 165 RPM | Drive Size: 3/8" Square Drive | Drive Retention: Ball Retainer | Weight: 2.00 kg / 4.41 lbs without battery | Length: 499 mm / 19.65" | Side to Center: 31.8 mm / 1.25" | Height: 92 mm / 3.63"

Features:

• CellCore cordless platform supports controlled assembly work while reducing hose and cord management at the workstation.
• Higher 15 - 50 Nm torque capacity covers mid-range fastening tasks that require more clamp load than lower-output cordless nutrunners.
• Right-angle head improves access to recessed, side-mounted, and fixture-obstructed fasteners where straight tools may not align properly.
• Ball retainer square drive supports fast socket changes while helping retain the socket during normal assembly use.
• Large on-tool user interface allows programming directly on the nutrunner without requiring a controller for basic setup.
• High torque version supports up to 10 programmable applications on the tool or expanded functionality through controller connection and FastApps.
• Drop tested up to 5 feet for durability in active production and assembly-line environments.
• Cmk > 2.0 +/- 10% accuracy supports repeatable fastening where torque consistency is part of the quality process.

Made in USA: 

Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:

Batteries:

• Cleco T50-1000497 Smart Lithium-Ion Battery
• Cleco T50-1000498 Smart Lithium-Ion Battery

Chargers:

• Cleco T50-1000499 Rapid Charger
• Cleco T50-1000500 6-Bay Sequential Charger

Applications:

• Automotive and vehicle assembly: Fastening brackets, mounts, covers, and structural subassemblies where cordless access and repeatable torque are needed.
• Industrial production lines: Installing fasteners on frames, machinery housings, fixtures, and equipment assemblies within the tool’s 15 - 50 Nm range.
• Appliance and equipment manufacturing: Tightening fasteners in cabinets, panels, chassis components, and hard-to-reach right-angle locations.
• Rework and repair stations: Controlled fastening during inspection, service, and component replacement where the tool must move between work areas.
• Process-controlled assembly cells: Supporting multiple programmed fastening jobs from one cordless tool when rundown strategy consistency matters.

FAQs:

• Q: How is the CCBAW503B different from the CCBAW353B?
  A: The CCBAW503B provides a higher torque range of 15 - 50 Nm / 11.1 - 36.8 ft-lbs, while the CCBAW353B covers 10.5 - 35 Nm / 7.7 - 25.8 ft-lbs. The CCBAW503B runs at a lower 165 RPM speed, making it the better fit when the application needs more torque rather than faster rundown.
• Q: What does the 3/8" square drive fit?
  A: The 3/8" square drive accepts compatible 3/8" drive sockets used for assembly fastening. Always match the socket to the fastener size, torque requirement, and retention style of the tool.
• Q: What does ball retainer mean?
  A: A ball retainer uses a spring-loaded ball to help hold the socket on the square drive. It is useful when frequent socket changes are needed while still providing socket retention during normal fastening work.
• Q: Can this nutrunner be programmed without a controller?
  A: Yes. The large on-tool interface allows direct programming for up to 10 applications. A controller can be added when the process requires expanded functionality through FastApps.
• Q: Are batteries and charger included with this SKU?
  A: The provided source data lists tool weight without battery but does not confirm whether CCBAW503B includes a battery or charger. Confirm kit contents before publishing or ordering.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog.

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com