Built for controlled fastening where accuracy and access both matter, the Cleco CCBAW253B CellCore Cordless Electric Nutrunner delivers a 5.5 - 18.4 ft-lbs torque range with a 3/8" square drive for repeatable tightening on light-to-mid torque assembly joints. Its 305 RPM free speed gives operators a balanced pace for controlled rundowns, helping reduce overrun risk compared with faster general-purpose cordless tools. The right-angle configuration improves reach around fixtures, panels, brackets, and machine frames where inline tools may not align properly with the fastener.
As part of Cleco’s CellCore cordless assembly platform, the CCBAW253B is suited for production environments that need mobility without giving up fastening feedback or programmable control. CellCore tools support on-tool programming and can be integrated into controller-based systems when additional functionality is required. This makes the CCBAW253B a strong fit for assembly cells, rework areas, and quality-focused manufacturing lines where operators need consistent torque in a cordless right-angle nutrunner.
Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.
Type: Cordless Electric Right Angle Nutrunner | Series: CellCore | Model: CCBAW253B | Drive Size: 3/8" Square Drive | Torque Range: 7.5 - 25 Nm / 5.5 - 18.4 ft-lbs | Free Speed: 305 RPM | Configuration: Right Angle | Power Source: Cordless Electric
Features:
- CellCore cordless electric platform provides programmable torque control without requiring a pneumatic hose at the workstation.
- Right-angle head improves access to fasteners located near fixtures, brackets, panels, and other obstructed assembly points.
- 3/8" square drive accepts compatible sockets for nut and bolt fastening in controlled production work.
- 305 RPM free speed supports measured rundown control for assembly tasks where repeatability is more important than maximum fastening speed.
- Torque range of 7.5 - 25 Nm covers common light-to-mid torque fastening jobs in manufacturing and rework environments.
- On-tool programming capability helps operators and tool technicians set up common fastening applications without unnecessary workstation changes.
- CellCore platform supports fastening feedback and process control for quality-critical assembly operations.
- Cordless design gives operators more freedom of movement around workcells, fixtures, and large assemblies.
Made in USA: 
Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:
Batteries:
Chargers:
Applications:
- Automotive and vehicle assembly — controlled tightening of brackets, covers, interior components, and smaller bolted joints.
- Appliance and equipment manufacturing — fastening frames, panels, housings, and subassemblies where repeatable torque is required.
- Aerospace and precision assembly cells — cordless right-angle fastening around fixtures, work stands, and restricted-access fasteners.
- Heavy truck, off-highway, and agricultural equipment production — mid-torque fastening on guards, mounts, panels, and equipment subassemblies.
- Maintenance and rework stations — controlled disassembly and reassembly when an impact wrench would be too aggressive for the joint.
FAQs:
- Q: What is the CCBAW253B best used for?
A: The CCBAW253B is best used for controlled assembly fastening in the 7.5 - 25 Nm range. It is a cordless electric nutrunner for repeatable tightening, not a breakaway tool for removing seized fasteners. - Q: What does the 3/8" square drive accept?
A: The 3/8" square drive accepts compatible 3/8" drive sockets. Socket selection should match the fastener size and the fastening application. - Q: How does this model compare with lower-torque CellCore nutrunners?
A: This model covers a higher torque range than the 4.5 - 15 Nm class while running at a lower 305 RPM speed. That makes it better suited to joints requiring more torque and more deliberate rundown control. - Q: Is this tool the same as a cordless impact wrench?
A: No. A cordless impact wrench is typically used for fast run-down and fastener removal. The CCBAW253B is a torque-controlled assembly nutrunner used when repeatability, fastening feedback, and process control are more important than breakaway force. - Q: Are battery and charger included?
A: The provided product title and source reference do not confirm kit contents. Please verify whether SKU CCBAW253B is supplied as a bare tool or with battery and charger before publishing or ordering.
| SKU | Torque Range (Nm) Min-Max | Torque Range (ft-lb) Min-Max | Speed r/min | Weight* kg (lb) | Length mm (in) | Side to Center mm (in) | Height mm (in) | Output |
|---|---|---|---|---|---|---|---|---|
| CCBAW153 | 4.5 - 15 | 3.3 - 11.0 | 570 | 1.70 (3.75) | 456 (17.95) | 31.8 (1.25) | 88 (3.46) | 3/8” Square Drive - Pin Detent |
| CCBAW153B | 4.5 - 15 | 3.3 - 11.0 | 570 | 1.70 (3.75) | 456 (17.95) | 31.8 (1.25) | 88 (3.46) | 3/8” Square Drive - Ball Retainer |
| CCBAW253 | 7.5 - 25 | 5.5 - 18.4 | 305 | 1.70 (3.75) | 456 (17.95) | 31.8 (1.25) | 88 (3.46) | 3/8” Square Drive - Pin Detent |
| CCBAW253B | 7.5 - 25 | 5.5 - 18.4 | 305 | 1.70 (3.75) | 456 (17.95) | 31.8 (1.25) | 88 (3.46) | 3/8” Square Drive - Ball Retainer |
| CCBAW353 | 10.5 - 35 | 7.7 - 25.8 | 255 | 1.95 (4.30) | 486 (19.15) | 31.8 (1.25) | 92 (3.63) | 3/8” Square Drive - Pin Detent |
| CCBAW353B | 10.5 - 35 | 7.7 - 25.8 | 255 | 1.95 (4.30) | 486 (19.15) | 31.8 (1.25) | 92 (3.63) | 3/8” Square Drive - Ball Retainer |
| CCBAW503 | 15 - 50 | 11.1 - 36.8 | 165 | 2.00 (4.41) | 499 (19.65) | 31.8 (1.25) | 92 (3.63) | 3/8” Square Drive - Pin Detent |
| CCBAW503B | 15 - 50 | 11.1 - 36.8 | 165 | 2.00 (4.41) | 499 (19.65) | 31.8 (1.25) | 92 (3.63) | 3/8” Square Drive - Ball Retainer |
Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog.
Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
