Cleco 50EPN28FD3 NeoTek Corded Electric Nutrunner | 2125 RPM | 4.1 - 20.6 (ft-lbs) Torque Range | 3/8" Square Drive

When a production cell needs faster rundown without giving up torque verification, the Cleco 50EPN28FD3 NeoTek Corded Electric Nutrunner delivers 2,125 RPM free speed with a 4.1 - 20.6 ft-lbs torque range for medium-light assembly fastening. The 3/8" square drive accepts compatible sockets for bolt and nut applications, while the pistol body gives operators a familiar trigger-style grip for repeated fastening at benches, fixtures, and assembly stations.

This 50 Series NeoTek model uses transducer control, meaning torque is measured directly at the tool for improved fastening consistency versus basic clutch-only control. With a 5.6 - 28.0 Nm working range, 3.48 lb tool weight, and Cleco’s configurable operator feedback features, the 50EPN28FD3 is suited for connected manufacturing environments where speed, traceability, and repeatable tightening results are part of the process requirement.

Type: Corded Electric Nutrunner | Series: NeoTek 50 Series | Control Type: Transducer Control | Configuration: Pistol | Model: 50EPN28FD3 | Torque Range: 5.6 - 28.0 Nm / 4.13 - 20.65 ft-lbs | Free Speed: 2,125 RPM | Output Drive: 3/8" Square Drive | Weight: 3.48 lb / 1.58 kg | Length: 10.08 in | Side to Center: 0.64 in

Features:

• 1 million cycles maintenance-free for reduced service interruptions in production fastening environments.
• Repeatability and accuracy with 2.0 Cm/Cmk at +/- 7% for controlled assembly processes.
• Configurable LED light rings provide clear visual feedback during fastening cycles.
• Tactile and audible operator feedback helps the user recognize tool status without relying only on the controller display.
• Programmable multi-function buttons support tool setup flexibility for different assembly tasks.
• Pistol configuration supports trigger-style operation for repeated socket-driven fastening.
• 3/8" square drive output works with compatible square-drive sockets for nut and bolt assembly.

Made in USA:

Applications:

• Automotive component assembly — tightening brackets, housings, modules, and other fasteners that fall within the 5.6 - 28.0 Nm torque range.
• Appliance manufacturing — fastening panels, frames, and mechanical subassemblies where repeatability is required across many cycles.
• Electronics and enclosure production — socket-driven assembly where controlled torque helps prevent over-tightening of inserts, covers, and mounting hardware.
• Industrial assembly workcells — connected fastening stations that use operator feedback, torque control, and fastening data to support quality checks.
• Agriculture and off-road equipment assembly — medium-light production fastening on subassemblies before final equipment build-up.

FAQs:

• Q: What is the difference between transducer control and a clutch-only tool?
  A: Transducer control measures torque directly through the tool’s sensing system, giving the assembly process better feedback on the actual tightening result. A clutch-only tool controls torque mechanically but typically provides less fastening data for traceability.
• Q: What sockets fit the 50EPN28FD3?
  A: This model has a 3/8" square drive, so it accepts compatible 3/8" drive sockets. Socket size should match the fastener, and the socket type should be appropriate for the assembly process and torque level.
• Q: Is 2,125 RPM considered fast for a nutrunner?
  A: Yes, within this torque class it provides fast rundown before final tightening. That helps reduce cycle time on production jobs where many fasteners must be installed repeatedly.
• Q: Can this tool replace an impact wrench?
  A: Not for breakaway or general repair work. The 50EPN28FD3 is a controlled assembly nutrunner for tightening fasteners to a specified torque range, while an impact wrench is typically used for loosening or high-force service work.
• Q: Is this model pneumatic?
  A: No. This is a corded electric NeoTek nutrunner, so it does not require compressed air, air hose sizing, or an FRL unit.

Looking for more information about Cleco Corded Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Corded Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com