Cleco 30EPN05BD2 NeoTek Corded Electric Nutrunner | 4275 RPM | 0.6 - 3.4 (ft-lbs) Torque Range | 1/4" Square Drive

Built for controlled fastening in light-torque production assembly, the Cleco 30EPN05BD2 NeoTek Corded Electric Nutrunner combines 4275 RPM free speed with a 0.66–3.47 ft-lbs torque range to help reduce cycle time on small fasteners without giving up process control. It's 1/4" square drive accepts compatible square-drive sockets, while the pistol grip format supports bench, cell, and station-based fastening where the operator needs a familiar trigger-style tool body.

As part of the Cleco NeoTek precision assembly platform, this 30 Series transducer-control nutrunner uses a transducer-control system, meaning the tool directly measures torque during the fastening cycle for repeatable assembly results. The brushless motor helps reduce wear compared with brushed motor designs, while configurable LED light rings, tactile and audible feedback, and programmable multi-function buttons support guided assembly workflows in automotive, appliance, electronics, and general manufacturing environments.

Type: Corded Electric Nutrunner | Brand: Cleco | Model: 30EPN05BD2 | Series: NeoTek 30 Series | Tool Style: Pistol Grip | Control Type: Transducer Control | Free Speed: 4275 RPM | Torque Range: 0.66–3.47 ft-lbs / 0.9–4.7 Nm | Output Drive: 1/4" Square Drive | Side to Center: 0.64" | Motor: Brushless

Features:

• Transducer-control fastening for repeatable torque monitoring in precision assembly applications.
• 4275 RPM free speed helps speed up rundown on small fasteners before final torque control.
• 0.66–3.47 ft-lbs torque range suits light-torque assembly work where over-tightening can damage parts or threads.
• 1/4" square drive works with compatible square-drive sockets for nut and bolt fastening tasks.
• Brushless motor reduces wear points compared with brushed motor tools and supports production fastening duty cycles.
• Configurable LED light rings provide visual status feedback for operators during assembly sequences.
• Tactile and audible operator feedback helps confirm fastening progress in busy workstations.
• Programmable multi-function buttons allow the tool setup to be adapted to approved assembly processes.

Made in USA:

Applications:

• Automotive assembly stations — fastening small brackets, covers, trim components, and light mechanical assemblies where repeatable torque control matters.
• Appliance manufacturing — installing hardware on housings, panels, frames, and subassemblies with controlled rundown speed.
• Electronics and electromechanical assembly — tightening small fasteners into plastic, sheet metal, and light-duty threaded components.
• General manufacturing cells — supporting repeatable nut and bolt fastening in bench-mounted or operator-held assembly workflows.
• Repair and rework areas — matching production fastening methods when parts must be removed, replaced, and reassembled to controlled torque values.

FAQs:

• Q: What type of fastening work is the Cleco 30EPN05BD2 used for?
  A: This model is used for light-torque production fastening where repeatability, speed, and controlled torque output are important. Its 0.66–3.47 ft-lbs range is best suited to smaller fasteners, not high-torque bolting.
• Q: What does transducer control mean on this nutrunner?
  A: Transducer control means the tool measures torque directly during the fastening cycle. This helps assembly teams monitor torque output and maintain more consistent fastening results than basic clutch-style tools.
• Q: What sockets fit the 30EPN05BD2?
  A: This model has a 1/4" square drive, so it should be matched with compatible 1/4" square-drive sockets. The related 30EPN05BDQ model uses a 1/4" quick-change output instead, so verify the drive style before ordering.
• Q: Is this a pneumatic tool?
  A: No. The 30EPN05BD2 is a corded electric NeoTek nutrunner, so it does not require compressed air or an FRL unit.
• Q: Is the 4275 RPM rating the tightening torque?
  A: No. 4275 RPM is the free speed, or how fast the tool rotates without load. The tightening capability is defined by the torque range of 0.66–3.47 ft-lbs.

Looking for more information about Cleco Corded Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Corded Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com