Cleco 30EPN12EAQ NeoTek Corded Electric Nutrunner | 1650 RPM | 2.8 - 8.5 (ft-lbs) Torque Range | 1/4" Quick Change

Built for controlled low-torque fastening in production assembly environments, the Cleco 30EPN12EAQ NeoTek corded electric nutrunner combines pistol-grip handling with a 2.8 - 8.5 ft-lbs torque range, also listed as 3.9 - 11.6 Nm, for repeatable tightening on smaller fasteners, brackets, housings, panels, and light subassemblies. Its 1,650 RPM speed helps move the fastener through rundown before final torque, while the 1/4" quick-change output supports compatible quick-change bits for faster bit swaps at the workstation.

As part of the Cleco NeoTek corded electric assembly platform, the 30EPN12EAQ is used with a controller-based fastening system for programmable rundown control, tightening data, and production process monitoring. The pistol configuration gives operators a familiar trigger-style tool body for station-based assembly work where torque repeatability, fastening documentation, and low cable bulk are important to the process.

Type: Corded Electric Nutrunner | Series: NeoTek 30 Series | Configuration: Pistol Grip | Output Drive: 1/4" Quick Change | Torque Range: 2.8 - 8.5 ft-lbs / 3.9 - 11.6 Nm | Max Speed: 1,650 RPM | Side to Center: 0.64"

Features:

• NeoTek corded electric platform supports controller-based fastening programs, tool communication, and documented assembly results.
• 1/4" quick change output helps operators switch compatible bits quickly when multiple fastener styles are used at the station.
• 1,650 RPM speed supports efficient rundown before final torque control takes over.
• Transducer control supports accurate torque measurement for fastening operations that require repeatable tightening results.
• Pistol-grip housing gives operators a familiar trigger-style format for bench, fixture, and production-line assembly.
• Configurable multifunction buttons allow the tool interface to be tailored to the fastening process.
• Configurable two-stage start switch supports controlled start behavior during repetitive assembly work.
• Combined data and supply cabling helps reduce cable bulk and supports cleaner workstation routing.

Made in USA:

Applications:

• Electronics and electromechanical assembly: tightening fasteners in enclosures, brackets, panels, and small subassemblies where low-to-mid torque control is required.
• Appliance and equipment manufacturing: repetitive fastening on covers, frames, trim components, and internal assemblies using compatible 1/4" quick-change bits.
• Automotive interior and module assembly: controlled rundown on smaller fasteners used in trim, electrical modules, light brackets, and component housings.
• Industrial production benches: station-based fastening where programmed rundown strategies and recorded tightening results support quality processes.
• Fixture-based assembly cells: pistol-grip fastening in layouts where operators need a compact handheld tool for vertical, side, or angled access.

FAQs:

• Q: What is the Cleco 30EPN12EAQ used for?
  A: The 30EPN12EAQ is used for controlled production fastening in the 2.8 - 8.5 ft-lbs torque range. It is intended for repeatable tightening and process-controlled assembly, not for loosening stuck fasteners like an impact wrench.
• Q: What does 1/4" quick change mean on this model?
  A: The 1/4" quick change output accepts compatible quick-change bits and adapters. This is useful when a station uses several screw or fastener styles and operators need faster bit changes than a fixed socket-drive setup would allow.
• Q: Does this NeoTek nutrunner require a controller?
  A: Yes. NeoTek corded electric tools are designed for use with a controller-based fastening system. Confirm the correct Cleco controller, cable, and fastening program requirements for your workstation before ordering.
• Q: How is this different from the 30EPN12FA3?
  A: The 30EPN12EAQ uses a 1/4" quick change output for compatible bits, while the 30EPN12FA3 uses a 3/8" square drive for sockets. Both share the same listed 2.8 - 8.5 ft-lbs torque range and 1,650 RPM speed, so the drive style is the main selection point.
• Q: Is this tool a good choice for DIY fastening?
  A: This model is built for controlled assembly systems in production environments. For home garage or general repair work, a standard cordless driver, drill, or impact tool is usually more practical unless you are building a process-controlled fastening station.

Looking for more information about Cleco Corded Electric Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Corded Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com