Cleco 19TCA06Q T-Handle Pneumatic Screwdriver | 19 Series | Push and Trigger Start | 260 RPM | 0.8 - 3.7 (ft-lbs) Torque Range

For fastening work that benefits from a slower, more controlled rundown, the Cleco 19TCA06Q T-handle pneumatic screwdriver pairs 260 RPM free speed with a 0.8 to 3.7 ft-lbs torque range. That lower speed gives operators more control as the screw seats, making this model useful for assembly jobs where fasteners, inserts, or mating components need a more deliberate rundown before final shut-off.

The 19TCA06Q features push and trigger start, meaning the bit must be pressed into the fastener while the trigger is actuated before the tool runs. Its Clecomatic clutch (an adjustable shut-off clutch that stops the tool when the preset torque is reached) helps reduce variation from operator to operator. With a 1/4" hex quick change drive, 1.54 lb tool weight, and 11 SCFM air consumption, this Cleco 19 Series screwdriver is a practical choice for controlled screwdriving in production assembly, rework benches, and light manufacturing cells.

Type: T-Handle Pneumatic Screwdriver | Series: 19 Series | Model: 19TCA06Q | Handle Type: T-Handle | Start Type: Push and Trigger Start | Clutch: Clecomatic Clutch | Drive: 1/4" Hex Quick Change | Torque Range: 10 - 45 in-lbs | Torque Range: 0.8 - 3.7 ft-lbs | Torque Range: 1.1 - 5.1 Nm | Torque Range with Standard Spring: 10 - 38 in-lbs | Torque Range with Standard Spring: 1.1 - 4.3 Nm | Free Speed: 260 RPM | Overall Length: 8.4" | Weight: 1.54 lb | Air Inlet: 1/4" NPT | Min. Hose I.D.: 3/8" | Air Consumption: 11 SCFM

Features:

• Durable Clecomatic clutch supports repeatable shut-off torque for controlled assembly fastening.
• 260 RPM free speed provides a slower rundown than higher-speed 19 Series models, giving operators added control as the fastener seats.
• Push and trigger start helps reduce accidental starts by requiring both bit pressure and trigger actuation.
• 1/4" hex quick change drive allows quick bit changes for stations using multiple screw types or drive styles.
• T-handle configuration helps the operator guide the tool straight into the fastener during vertical or fixture-supported fastening.
• Reverse lever can be rotated to accommodate left-handed or right-handed operators.
• Two grip sizes are available for added versatility across different operators and assembly cells.

Applications:

• Controlled assembly stations: Used for screw installation where slower rundown speed helps operators manage seating and final torque shut-off.
• Aerospace and precision manufacturing: Supports repeatable fastening on pre-threaded parts, brackets, panels, and light mechanical assemblies.
• Automotive and transportation assembly: Useful for trim, interior, subassembly, and component fastening where consistent torque helps reduce rework.
• Appliance and equipment production: Helps install screws in housings, frames, covers, and small assemblies using controlled pneumatic power.
• Repair and rework benches: Provides a repeatable alternative to manual screwdrivers for repeated disassembly and reassembly tasks.

FAQs:

• Q: What is the torque range of the Cleco 19TCA06Q?
  A: The tool range is 10 to 45 in-lbs, which is approximately 0.8 to 3.7 ft-lbs or 1.1 to 5.1 Nm. With the standard spring, the listed range is 10 to 38 in-lbs.
• Q: Why choose the 260 RPM model instead of a faster 19 Series screwdriver?
  A: The 260 RPM speed gives the operator more control during rundown. It is useful when the fastener needs to seat carefully before the Clecomatic clutch shuts the tool off at the preset torque.
• Q: What does push and trigger start mean?
  A: Push and trigger start means the bit must be pressed into the fastener while the trigger is pulled before the motor starts. This helps the operator control engagement at the beginning of the rundown.
• Q: What bit style does this screwdriver use?
  A: The 19TCA06Q uses a 1/4" hex quick change drive. Use compatible 1/4" hex screwdriver bits matched to the fastener drive style and application.
• Q: What air supply is required for this tool?
  A: This model lists 11 SCFM air consumption, a 1/4" NPT air inlet, and a 3/8" minimum hose I.D. Use clean, regulated air and a properly sized FRL to help maintain torque consistency and tool performance.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Do you need help selecting the correct Cleco Screwdrivers for your assembly application? Please call (800) 608-5210 or email info@intlairtool.com.