Cleco 19TCA02Q T-Handle Pneumatic Screwdriver | 19 Series | Push and Trigger Start | 2,800 RPM | 0.4 - 1.5 (ft-lbs) Torque Range

For light-torque assembly work where fast run-down and controlled final tightening both matter, the Cleco 19TCA02Q T-Handle Pneumatic Screwdriver combines a high 2,800 RPM free speed with a low 0.4 - 1.5 ft-lbs torque range. This configuration is well-suited for smaller screws, light threaded fasteners, and production tasks where operators need speed without moving into higher torque ranges that could damage parts or strip threads.

Part of the 19 Series, this model uses a push-and-trigger start arrangement that lets the operator start the tool by applying forward pressure or by using the trigger, depending on the task and preferred working method. The Clecomatic shut-off clutch stops the screwdriver when the selected torque is reached, helping improve fastening consistency from part to part. A 1/4" hex quick-change drive accepts common screwdriver bits, while the compact T-handle / pistol-grip layout provides familiar handling for bench assembly, light manufacturing, and repair work.

Type: Pneumatic Screwdriver | Brand: Cleco | Model: 19TCA02Q | Series: 19 Series | Handle Style: T-Handle / Pistol Grip | Start Type: Push and Trigger Start | Clutch Type: Clecomatic Shut-Off | Drive Size: 1/4" Hex Quick Change | Free Speed: 2,800 RPM | Torque Range: 0.4 - 1.5 ft-lbs | Torque Range: 5 - 19 in-lbs | Torque Range: 0.6 - 2.1 Nm | Air Inlet: 1/4" NPT | Min. Hose Size: 3/8" | Air Consumption: 11 SCFM | Overall Length: 8.0" | Tool Weight: 1.44 lb | Operation: Reversible

Features:

• Clecomatic shut-off clutch helps deliver repeatable torque control for light fastening applications.
• Push and trigger start operation gives operators two start methods for different assembly positions and work habits.
• 2,800 RPM free speed supports fast screw run-down on small fasteners before clutch shut-off.
• 1/4" hex quick change drive allows quick bit changes when moving between fastener styles.
• T-handle / pistol-grip body provides a familiar hand position for bench, fixture, and line-side assembly work.
• Reversible operation supports both installation and removal during assembly, inspection, and rework.
• Low torque range helps reduce the risk of over-tightening small screws and light threaded components.

Applications:

• Electronics and light assembly: fastening small screws in housings, brackets, covers, and component assemblies.
• Appliance and consumer product manufacturing: quick screw run-down where low torque control helps protect plastic, sheet metal, or light threaded parts.
• Automotive interior and trim work: installing small fasteners on panels, clips, light brackets, and access covers.
• Repair and rework stations: removing and reinstalling screws during inspection, troubleshooting, and part replacement.
• General production benches: repetitive screwdriving tasks where operators need a compact air tool with controlled shut-off torque.

FAQs:

• Q: What is the Cleco 19TCA02Q best used for?
  A: The 19TCA02Q is best suited for light-torque screwdriving tasks where fast run-down and repeatable shut-off torque are needed. Its 0.4 - 1.5 ft-lbs torque range makes it a good fit for smaller fasteners and lighter assemblies.
• Q: What does push and trigger start mean?
  A: Push and trigger start means the tool can be started by applying forward pressure to the fastener or by using the trigger. This gives operators flexibility when working in fixtures, on benches, or in different fastening positions.
• Q: What bits does the 19TCA02Q accept?
  A: This screwdriver uses a 1/4" hex quick change drive. Use compatible 1/4" hex screwdriver bits matched to the screw head and application.
• Q: How does the Clecomatic clutch help during assembly?
  A: The Clecomatic shut-off clutch stops the tool when the selected torque is reached. That helps reduce fastener variation and limits the chance of over-tightening light-duty screws.
• Q: What air supply should be used with this screwdriver?
  A: Use a clean, regulated air supply with a 3/8" minimum hose size and enough capacity to support the listed 11 SCFM air consumption. A properly sized FRL is recommended for air preparation and lubrication.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Do you need help selecting the correct Cleco Screwdrivers for your assembly application? Please call (800) 608-5210 or email info@intlairtool.com.