Cleco 19PCA03Q P-Handle Pneumatic Screwdriver | 19 Series | Push and Trigger Start | 1,900 RPM | 0.4 - 2.1 (ft-lbs) Torque Range

Built for controlled fastening in light assembly and production work, the Cleco 19PCA03Q P-Handle Pneumatic Screwdriver combines a 19 Series platform with push and trigger start operation to give operators better control before the tool begins rundown. Its 1,900 RPM free speed supports efficient screw installation in repetitive assembly tasks, while the 0.4 - 2.1 ft-lbs torque range gives the tool the accuracy range needed for small threaded fasteners, housings, panels, brackets, and light components.

The 19PCA03Q uses a Cleco-Matic shut-off clutch, a torque-control clutch that stops the screwdriver when the preset torque is reached to improve fastening repeatability. The 1/4" quick-change hex drive accepts common screwdriver bits for quick bit changes at the workstation, and reversible operation supports both installation and removal. With its P-handle configuration and soft-touch grip, this screwdriver is well-suited for electronics, appliances, automotive interior, light fabrication, and general assembly environments where fastener consistency matters.

Type: P-Handle Pneumatic Screwdriver | Series: 19 Series | Model: 19PCA03Q | Start Type: Push and Trigger Start | Clutch Type: Cleco-Matic Shut-Off Clutch | Free Speed: 1,900 RPM | Torque Range: 0.4 - 2.1 ft-lbs / 5 - 26 in-lbs | Drive Size: 1/4" Quick Change Hex | Operation: Reversible | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8"

Features:

• Cleco-Matic shut-off clutch stops the tool when the preset torque is reached for improved repeatability in assembly fastening.
• Push and trigger start helps reduce unintended starts by requiring both bit engagement and trigger activation before the screwdriver runs.
• 1,900 RPM free speed supports fast screw rundown in production, bench assembly, and light manufacturing workstations.
• 1/4" quick-change hex drive allows faster bit changes when switching between compatible screw styles or drive recesses.
• Reversible operation supports both screw installation and removal during assembly, inspection, repair, and rework tasks.
• Soft-touch grip helps protect the operator from temperature, chemicals, vibration, and slip during repeated fastening cycles.
• 19 Series design provides a lighter platform than the previous generation, helping reduce fatigue in high-cycle screwdriving applications.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Electronics assembly: Installing small screws in covers, brackets, housings, and components where controlled torque helps protect threaded parts.
• Appliance manufacturing: Fastening panels, trim pieces, internal assemblies, and light hardware on line or bench production stations.
• Automotive interior assembly: Running down screws in consoles, trim panels, brackets, and light subassemblies where repeatable fastening is required.
• General light manufacturing: Repeated screw installation in enclosures, fixtures, equipment panels, and fabricated components.
• Repair and rework benches: Removing and reinstalling fasteners during inspection, service, component replacement, and final adjustment work.

FAQs:

• Q: What does push and trigger start mean?
  A: Push and trigger start means the bit must be pressed into the fastener and the trigger must be activated before the screwdriver runs. This gives the operator more control during bit placement and helps reduce accidental starts.
• Q: What is a Cleco-Matic shut-off clutch?
  A: A Cleco-Matic shut-off clutch stops the tool when the preset torque is reached. This helps improve fastening consistency compared with basic stall or cushion clutch screwdrivers, especially in repeated assembly work.
• Q: What bits fit the Cleco 19PCA03Q?
  A: This screwdriver uses a 1/4" quick-change hex drive for compatible screwdriver bits. Match the bit style to the screw recess and select bits rated for the torque and production use required.
• Q: Is the 0.4 - 2.1 ft-lbs torque range suitable for small screws?
  A: Yes. The range equals approximately 5 - 26 in-lbs, which is commonly used for smaller fasteners in electronics, appliances, light panels, and general assembly work.
• Q: Can this tool remove screws as well as install them?
  A: Yes. The 19PCA03Q is reversible, so it can be used for both installation and removal when the bit, fastener, and torque setting are appropriate for the application.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need left-handed or right-handed Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com