Cleco 19PCA02Q P-Handle Pneumatic Screwdriver | 19 Series | Push and Trigger Start | 2,800 RPM | 0.4 - 1.5 (ft-lbs) Torque Range

Built for repetitive light-assembly fastening, the Cleco 19PCA02Q P-Handle Pneumatic Screwdriver combines a controlled 2,800 RPM free speed with a low torque range for small screws, trim fasteners, threaded inserts, and production bench work. The P-handle configuration gives the operator a firm forward push point, which is especially useful when driving thread-cutting fasteners that need steady pressure during rundown.

Part of the Cleco 19 Series, this pneumatic screwdriver uses a CLECOMatic clutch, a shut-off clutch system that stops the tool when the preset torque is reached instead of continuing to drive the fastener. The push and trigger start setup gives operators flexible activation control, while the 1/4" hex quick change drive accepts common screwdriver bits and supports fast bit swaps between assembly tasks. With a confirmed tool torque range of 5–19 in-lbs., the 19PCA02Q is suited for precision fastening where repeatability, low fastener damage, and efficient handling matter more than high torque output.

Type: P-Handle Pneumatic Screwdriver | Series: Cleco 19 Series | Model: 19PCA02Q | Start Type: Push and Trigger Start | Clutch Type: CLECOMatic Shut-Off Clutch | Drive: 1/4" Hex Quick Change | Free Speed: 2,800 RPM | Tool Torque Range: 5–19 in-lbs. / 0.6–2.1 Nm | Standard Spring Torque Range: 5–19 in-lbs. / 0.6–2.1 Nm | Overall Length: 8.1" / 206 mm | Weight: 1.41 lbs. / 0.6 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Air Consumption: 11 SCFM

Features:

• CLECOMatic shut-off clutch stops the tool when the preset torque is reached for controlled, repeatable fastening.
• P-handle layout provides a forward push point for thread-cutting fasteners and other applications requiring steady operator pressure.
• Push and trigger start operation gives operators more control over tool activation during bench and fixture work.
• 1/4" hex quick change drive supports fast bit replacement and works with compatible 1/4" hex screwdriver bits.
• External torque adjustment helps simplify tool setup when changing fastener size, material, or joint requirements.
• Adjustable reverse lever supports one-hand operation for both left-handed and right-handed users.
• Each unit is tested and certified by a technician before shipment, supporting production environments that require documented tool performance.
• Grip material is built for assembly environments where contact with temperature changes, chemicals, vibration, and slipping can affect handling.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Electronics assembly — fastening small housings, covers, boards, brackets, and low-torque screws.
• Appliance manufacturing — driving trim screws, panels, clips, and light-duty fasteners on repetitive production work.
• Automotive interior assembly — installing interior panels, plastic components, brackets, and small fasteners where controlled torque matters.
• Aerospace and precision assembly — fastening small components where clutch shut-off and repeatable torque help reduce rework.
• Thread-cutting screw applications — using the P-handle to apply steady forward pressure while the fastener forms or cuts threads.

FAQs:

• Q: What is the torque range of the Cleco 19PCA02Q?
  A: Manufacturer data lists a tool torque range of 5–19 in-lbs. / 0.6–2.1 Nm, with the same range listed for the standard spring. In foot-pounds, that is approximately 0.4–1.6 ft-lbs.
• Q: What is the advantage of the P-handle configuration?
  A: The P-handle gives the operator a better push point when forward force is needed during fastening. This is especially helpful with thread-cutting fasteners and production jobs where the tool must stay aligned as the screw starts.
• Q: What does a CLECOMatic clutch do?
  A: The CLECOMatic clutch shuts the tool off when the preset torque is reached. This helps improve torque repeatability and reduces the chance of overdriving small fasteners.
• Q: What bits fit this screwdriver?
  A: The 19PCA02Q uses a 1/4" hex quick change drive, so it accepts compatible 1/4" hex screwdriver bits used in common industrial assembly applications.
• Q: Is this the right tool for bolts or high-torque fastening?
  A: No. This model is a low-torque pneumatic screwdriver for small fasteners. For bolts, nuts, or higher-torque assembly work, select a Cleco nutrunner or a higher-capacity assembly tool matched to the required torque range.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need left-handed or right-handed Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com