Chicago Pneumatic Battery Torque Wrench | CP8609-xCT PACK 36V 2.5AH | 220 - 665 (ft-lbs) Torque Range | 1" Square Drive

Built for wheel tightening jobs that need extra reaction reach and straightforward cordless torque control, the Chicago Pneumatic CP8609-xCT PACK 36V 2.5AH battery torque wrench delivers a 220 - 665 ft-lbs torque range with ±4% accuracy. Its 1" square drive fits large industrial sockets, while the extended Cup reaction arm configuration helps position the reaction point for wheel-focused fastening when used with the correct separately ordered cup accessory.

This CP8609-xCT is the extended Cup, 1-trigger stand-alone model in the CP8609 eBlueTork Series. The digital OLED screen gives technicians intuitive torque adjustment directly on the tool, and the 36V 2.5Ah lithium-ion battery platform keeps the wrench mobile around trucks, buses, trailers, and field equipment without compressed-air setup. Hard and soft joint capability means the tool can be used on rigid metal-to-metal fasteners as well as assemblies with some compression from washers, spacers, or similar components.

Type: Battery Torque Wrench | Series: CP8609 eBlueTork | Model: CP8609-xCT PACK 36V 2.5AH | SKU: 6151570620 | Version: Stand Alone | Starting System: 1 Trigger | Reaction Bar: Extended Cup / Sliding Drive | Cup Included: No | Drive Size: 1" | Drive Type: Square | Output Retainer: Dual | Torque Range: 220 - 665 ft-lbs / 300 - 900 Nm | Recommended Torque: 531 ft-lbs / 720 Nm | Accuracy: ±4% | Free Speed: 15 RPM | Torque Control System: Shut-off-current control | Adjustment: Digital | Joint Type: Hard & Soft | Battery: 36V 2.5Ah Lithium-Ion | Sound Pressure: 62 dB(A) | Sound Power: <83 dB(A) | Vibration: <2.5 m/s² | Length: 19.49" | Height: 11.22" | Width: 3.03" | Side to Center: 1.32" | Weight without Reaction Arm: 15.2 lbs

Features:

• Stand-alone CP8609 configuration provides digital torque adjustment directly from the tool without connected reporting requirements.
• 1-trigger starting system gives trained technicians direct activation during established wheel tightening procedures.
• Extended Cup reaction arm configuration is used with compatible cup accessories for wheel-focused reaction setups; the cup accessory is ordered separately.
• High precision ±4% torque accuracy helps support repeatable tightening on large wheel and bolting applications.
• Digital OLED screen provides intuitive torque setup and tool feedback at the wrench.
• Shut-off-current control helps stop the tool when the programmed torque target is reached.
• Reversible operation supports tightening and loosening tasks within the tool’s rated use.
• 36V 2.5Ah lithium-ion battery platform keeps technicians mobile around service bays, vehicle lifts, and field equipment.

Kit Includes:

• 1 CP8609-xCT battery torque wrench
• 2 batteries
• 1 battery charger
• 1 charger cable
• 1 plastic case

Applications:

• Truck and fleet wheel service - controlled lug nut tightening where torque accuracy matters more than impact-style rundown speed.
• Bus and transit maintenance - cordless 1" drive fastening for large wheel-end hardware and high-use fleet service work.
• Tire service operations - repeated wheel tightening with an extended Cup reaction setup for applications that need added reaction-arm reach.
• Industrial maintenance and MRO - torque-controlled fastening on large fixtures, machinery, and bolted assemblies.
• Mobile field service - battery-powered torque work where compressed air setup is unavailable, inconvenient, or slower to deploy.

FAQs:

• Q: What does "xCT" mean on the CP8609-xCT?
  A: In this CP8609 configuration, "xC" identifies the extended Cup reaction arm setup, and "T" identifies the 1-trigger version. This gives the tool an extended cup-style reaction configuration with direct single-trigger activation.
• Q: Is the reaction cup included with this PACK?
  A: No. The tool includes the extended Cup reaction arm configuration, but the compatible cup accessory is ordered separately. Confirm the correct spring loaded cup or Japanese type cup accessory for the wheel application before ordering.
• Q: Does this model include connected reporting or Torque Check functions?
  A: No. This is the stand-alone version. It provides digital torque adjustment and controlled tightening, but it does not include the connected or Torque Check reporting functions found on C, CQ, or TC versions.
• Q: Does the CP8609-xCT PACK include batteries and a charger?
  A: Yes. This pack includes the CP8609-xCT tool, 2 batteries, 1 battery charger, 1 charger cable, and 1 plastic case.
• Q: Is this tool the same as an impact wrench?
  A: No. This is a battery torque wrench for controlled tightening. It is used when target torque and repeatability are more important than impact-style breakaway force.

Looking for more information about Chicago Pneumatic Cordless Torque Wrench? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Cordless Torque Wrenches for your assembly application, call (800) 608-5210 or email info@intlairtool.com