Built for controlled routing and precision edge-finishing, the Dotco 14-2511 Router Guide is designed for use with 1/4" shank router bits and compatible Dotco pneumatic routers. This accessory helps maintain a steady routing path during trimming and material-removal operations, making it easier to produce consistent, repeatable results on a variety of workpieces.
The 14-2511 router guide is intended for composite fabrication, aerospace manufacturing, woodworking, laminate trimming, and general industrial routing applications. Supplied as a router guide accessory only, it is designed to work with compatible Dotco routers and matching 1/4" shank router bits.
Type: Router Guide | Model: 14-2511 | Compatible Bit Shank: 1/4" | Application: Router Bit Guidance
|
Features:
Made in USA: |
|
Important: Insert the bit into the collet as far as possible, then pull out 1/16" and tighten the collet.
In an emergency: If it is necessary to pull out the bit more than 1/4", be sure to insert a short length of blank shank (not to exceed 5/8” long) in the bottom of the collet before inserting the bit.
Applications:
- Precision trimming of composite panels and fabricated components.
- Controlled edge routing for aerospace parts and assemblies.
- Woodworking and laminate routing with compatible 1/4" shank router bits.
- General fabrication and production routing where guided tool control improves consistency.
FAQs:
- Q: What router bit shank size is compatible with the Dotco 14-2511?
A: The Dotco 14-2511 is designed for router bits with a 1/4" shank. - Q: Is this a complete router?
A: No. This SKU is a router guide accessory only. Compatible routers and router bits are sold separately. - Q: What advantage does a router guide provide?
A: A router guide helps maintain a consistent routing path, improving control during trimming, edge-finishing, and precision routing operations.
| SKU | Dimension A | Dimension B | Dimension C | Dimension D |
|---|---|---|---|---|
| in | in | in | in | |
| 14-2400 | 1 | 3/8 | 1/8 | 1/8 |
| 14-2401 | 1 | 3/8 | 1/4 | 1/8 |
| 14-2402 | 1 | 3/8 | 3/8 | 1/8 |
| 14-2406 | 1 | 7/16 | 1/8 | 1/8 |
| 14-2407 | 1 | 7/16 | 1/4 | 1/8 |
| 14-2408 | 1 | 7/16 | 3/8 | 1/8 |
| 14-2411 | 1 | 1/2 | 1/4 | 1/8 |
| 14-2412 | 1 | 1/2 | 1/2 | 1/8 |
| 14-2413 | 1 | 1/2 | 5/8 | 1/8 |
| 14-2414 | 1 | 1/2 | 3/4 | 1/8 |
| 14-2417 | 1 | 9/16 | 1/8 | 1/8 |
| 14-2420 | 1 | 5/8 | 1/8 | 1/8 |
| 14-2421 | 1 | 5/8 | 5/8 | 1/8 |
| 14-2500 | 1-1/2 | 3/8 | 1/8 | 1/8 |
| 14-2501 | 1-1/2 | 3/8 | 1/4 | 1/8 |
| 14-2502 | 1-1/2 | 3/8 | 3/8 | 1/8 |
| 14-2505 | 1-1/2 | 7/16 | 1/8 | 1/8 |
| 14-2506 | 1-1/2 | 7/16 | 1/4 | 1/8 |
| 14-2507 | 1-1/2 | 7/16 | 3/8 | 1/8 |
| 14-2510 | 1-1/2 | 1/2 | 1/4 | 1/8 |
| 14-2511 | 1-1/2 | 1/2 | 3/8 | 1/8 |
| 14-2512 | 1-1/2 | 1/2 | 1/2 | 1/8 |
| 14-2600 | 2-1/2 | 1/2 | 1/2 | 3/16 |
| 14-2703 | 3/4 | 3/8 | 1/2 | 1/8 |
Looking for more information about Dotco Accessory? Click here to view the Catalog.
Need help selecting the correct Dotco Accessories for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
