Ingersoll Rand QA8ASLS040NP41S06 Inline Air Nutrunner is configured for repetitive production fastening where direct tool access and controlled torque are required. Featuring a 3/8" drive, 14.8–29.5 ft-lbs torque range, 570–600 RPM operating speed, and lever start, this model provides a combination of fastening control and efficient rundown speed for assembly operations within its specified range.
Ingersoll Rand QA8ASLS040NP41S06 uses an inline configuration that aligns the tool body with the fastening axis, making it suitable for workstations where the fastener can be approached directly. Its 3/8" square drive accepts compatible sockets, while lever-start operation gives the operator direct control over tool activation during each fastening cycle.
Type: Inline Air Nutrunner | Drive Size: 3/8" | Torque Range: 14.8–29.5 ft-lbs | Speed: 570–600 RPM | Start Type: Lever Start | Series: QA8 Series
|
Features:
Made in USA: |
 |
Applications:
- Repetitive production fastening requiring torque within the 14.8–29.5 ft-lbs range.
- Assembly workstations where fasteners can be approached directly with an inline pneumatic tool.
- Manufacturing processes using compatible 3/8" drive sockets and operator-controlled lever activation.
- Fastening of machinery components, brackets, fabricated parts, and similar assemblies within the tool's specified capability.
FAQs:
- Q: What torque range does the QA8ASLS040NP41S06 provide?
A: This model has a specified torque range of 14.8–29.5 ft-lbs. - Q: What drive size does this inline air nutrunner use?
A: The QA8ASLS040NP41S06 uses a 3/8" square drive for compatible sockets. - Q: How is this nutrunner activated?
A: This model uses lever-start operation, allowing the operator to control tool activation directly during each fastening cycle. - Q: What is the operating speed of this model?
A: The provided product specification lists an operating speed of 570–600 RPM. - Q: When is an inline nutrunner configuration a practical choice?
A: An inline configuration is well suited to assembly stations where the fastener can be approached directly along its fastening axis without surrounding components obstructing the tool body.
| SKU | 90 PSI FT-LBS (NM) | 90 PSI RPM | 77 PSI FT-LBS (NM) | 77 PSI RPM | LBS (KG) | IN (MM) | IN (MM) | IN |
|---|---|---|---|---|---|---|---|---|
| LEVER START | ||||||||
| QA8ASLS040NP41S06 | 14.8 – 29.5 (20 – 40) | 600 | 14.8 – 25.8 (20 – 35) | 570 | 5.27 (2.39) | 19.7" (502) | 0.80" (20) | 3/8" |
| QA8ASLS040NP41S08 | 14.8 – 29.5 (20 – 40) | 600 | 14.8 – 25.8 (20 – 35) | 570 | 5.29 (2.40) | 19.7" (502) | 0.80" (20) | 1/2" |
| QA8ASLS055NP41S08 | 18.4 – 40.6 (25 – 55) | 470 | 18.4 – 36.1 (25 – 49) | 445 | 5.29 (2.40) | 19.7" (502) | 0.80" (20) | 1/2" |
| QA8ASLS070NP41S08 | 25.8 – 51.6 (35 – 70) | 355 | 25.8 – 45.7 (35 – 62) | 335 | 5.60 (2.54) | 19.9" (506) | 0.94" (24) | 1/2" |
| QA8ASLS090NP41S08 | 33.2 – 66.4 (45 – 90) | 255 | 33.2 – 59.0 (45 – 80) | 245 | 6.33 (2.87) | 21.3" (542) | 0.94" (24) | 1/2" |
| QA8ASLS115NF41S08 | 51.6 – 84.8 (70 – 115) | 215 | 51.6 – 75.2 (70 – 102) | 205 | 7.50 (3.40) | 21.3" (541) | 2.00" (51) | 1/2" |
| QA8ASLS150NF41S08 | 55.3 – 110.6 (75 – 150) | 165 | 55.3 – 98.1 (75 – 133) | 160 | 7.50 (3.40) | 21.3" (541) | 2.00" (51) | 1/2" |
| QA8ASLS180NF41S08 | 66.4 – 132.8 (90 – 180) | 140 | 66.4 – 118.0 (90 – 160) | 135 | 7.50 (3.40) | 21.3" (541) | 2.00" (51) | 1/2" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
