Ingersoll Rand QA4ASLS046NP41S06 Inline Air Nutrunner is configured for repetitive production fastening where direct access along the fastener axis is available. Part of the QA4 Series, this model features a 3/8" drive, 14.8–33.9 ft-lbs torque range, 233–250 RPM speed range, and lever start, providing a higher torque range with a controlled rundown rate for assembly processes within its specified capability.
Ingersoll Rand QA4ASLS046NP41S06 uses an inline configuration that keeps the tool body aligned with the fastening point, making it suitable for workstations with adequate straight-line clearance. Its 3/8" square drive accepts compatible sockets, while lever-start operation allows the operator to control tool activation directly during each fastening cycle.
Type: Inline Air Nutrunner | Series: QA4 Series | Drive Size: 3/8" | Torque Range: 14.8–33.9 ft-lbs | Speed: 233–250 RPM | Start Type: Lever Start
|
Features:
Made in USA: |
 |
Applications:
- Production assembly operations requiring fastening within the 14.8–33.9 ft-lbs torque range.
- Assembly stations with sufficient straight-line clearance for an inline pneumatic fastening tool.
- Repetitive fastening processes using compatible 3/8" drive sockets and operator-controlled lever activation.
- Machinery component, bracket, equipment, and fabricated-product assembly where the specified torque and speed ranges match the fastening requirements.
FAQs:
- Q: What torque range does the QA4ASLS046NP41S06 provide?
A: This model has a specified torque range of 14.8–33.9 ft-lbs. - Q: What speed range is specified for this inline air nutrunner?
A: The QA4ASLS046NP41S06 has a specified speed range of 233–250 RPM. - Q: What drive size does this model use?
A: It uses a 3/8" square drive for compatible 3/8" drive sockets. - Q: How is the QA4ASLS046NP41S06 activated?
A: This model uses lever-start operation, allowing the operator to activate the tool directly during each fastening cycle. - Q: What should be checked before selecting this nutrunner?
A: Confirm that the required fastening torque falls within the 14.8–33.9 ft-lbs range and that the 3/8" drive, inline configuration, and available straight-line access match the assembly requirements.
| SKU | 90 psi ft-lbs (Nm) | 90 psi rpm | 77 psi ft-lbs (Nm) | 77 psi rpm | lbs (kg) | in (mm) | in (mm) | in |
|---|---|---|---|---|---|---|---|---|
| Lever Start | ||||||||
| QA4ASLS012NP41S06 | 4.4 – 8.8 (6 – 12) | 1,050 | 4.4 – 7.4 (6 – 10) | 977 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS015NP41S06 | 5.2 – 11.1 (7 – 15) | 850 | 5.2 – 9.4 (7 – 12.7) | 791 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS020NP41S06 | 7.4 – 14.8 (10 – 20) | 600 | 7.4 – 12.5 (10 – 17) | 558 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS027NP41S06 | 10.3 – 19.9 (14 – 27) | 450 | 10.3 – 16.7 (14 – 22.7) | 419 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS046NP41S06 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.73 (1.69) | 18.8″ (478) | 0.91″ (23) | 3/8″ |
| QA4ASLS046NP41S08 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.77 (1.71) | 18.8″ (478) | 0.91″ (23) | 1/2″ |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
