Ingersoll Rand QA4ASLS027NP41S06 Inline Air Nutrunner is configured for repetitive production fastening where direct access along the fastener axis is available. Part of the QA4 Series, this model combines a 3/8" drive, 10.3–19.9 ft-lbs torque range, 419–450 RPM speed range, and lever start, providing controlled fastening performance for assembly processes within its specified operating range.
Ingersoll Rand QA4ASLS027NP41S06 uses an inline configuration that keeps the tool body aligned with the fastening point, making it suitable for workstations with adequate straight-line clearance. Its 3/8" square drive accepts compatible sockets, while lever-start operation gives the operator direct control over tool activation during each fastening cycle.
Type: Inline Air Nutrunner | Series: QA4 Series | Drive Size: 3/8" | Torque Range: 10.3–19.9 ft-lbs | Speed: 419–450 RPM | Start Type: Lever Start
|
Features:
Made in USA: |
 |
Applications:
- Production assembly operations requiring fastening within the 10.3–19.9 ft-lbs torque range.
- Repetitive fastening stations with sufficient straight-line clearance for an inline pneumatic tool.
- Assembly processes using compatible 3/8" drive sockets and operator-controlled lever activation.
- Machinery component, bracket, and fabricated-product assembly where the specified torque and speed ranges match the fastening requirements.
FAQs:
- Q: What torque range does the QA4ASLS027NP41S06 provide?
A: This model has a specified torque range of 10.3–19.9 ft-lbs. - Q: What speed range is specified for this inline air nutrunner?
A: The QA4ASLS027NP41S06 has a specified speed range of 419–450 RPM. - Q: What drive size does this model use?
A: It uses a 3/8" square drive and should be paired with compatible 3/8" drive sockets. - Q: How is the QA4ASLS027NP41S06 activated?
A: This model uses lever-start operation, allowing the operator to control tool activation directly during the fastening cycle. - Q: When is an inline configuration a suitable choice?
A: An inline nutrunner is suitable when the assembly provides sufficient straight-line access along the fastener axis and an angle-head configuration is not required for clearance.
| SKU | 90 psi ft-lbs (Nm) | 90 psi rpm | 77 psi ft-lbs (Nm) | 77 psi rpm | lbs (kg) | in (mm) | in (mm) | in |
|---|---|---|---|---|---|---|---|---|
| Lever Start | ||||||||
| QA4ASLS012NP41S06 | 4.4 – 8.8 (6 – 12) | 1,050 | 4.4 – 7.4 (6 – 10) | 977 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS015NP41S06 | 5.2 – 11.1 (7 – 15) | 850 | 5.2 – 9.4 (7 – 12.7) | 791 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS020NP41S06 | 7.4 – 14.8 (10 – 20) | 600 | 7.4 – 12.5 (10 – 17) | 558 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS027NP41S06 | 10.3 – 19.9 (14 – 27) | 450 | 10.3 – 16.7 (14 – 22.7) | 419 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS046NP41S06 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.73 (1.69) | 18.8″ (478) | 0.91″ (23) | 3/8″ |
| QA4ASLS046NP41S08 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.77 (1.71) | 18.8″ (478) | 0.91″ (23) | 1/2″ |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
