Ingersoll Rand QA4ASLS020NP41S06 Inline Air Nutrunner is configured for repetitive production fastening where the assembly provides direct access along the fastener axis. Part of the QA4 Series, this model features a 3/8" drive, 7.4–14.8 ft-lbs torque range, 558–600 RPM speed range, and lever start, providing controlled fastening capability for assembly processes within its specified operating range.
Ingersoll Rand QA4ASLS020NP41S06 uses an inline configuration that keeps the tool body aligned with the fastening point, making it a practical option for workstations with adequate straight-line clearance. Its 3/8" square drive accepts compatible sockets, while lever-start operation gives the operator direct control over tool activation during each fastening cycle.
Type: Inline Air Nutrunner | Series: QA4 Series | Drive Size: 3/8" | Torque Range: 7.4–14.8 ft-lbs | Speed: 558–600 RPM | Start Type: Lever Start
|
Features:
Made in USA: |
 |
Applications:
- Production assembly operations requiring fastening within the 7.4–14.8 ft-lbs torque range.
- Workstations with sufficient straight-line clearance for an inline pneumatic fastening tool.
- Repetitive fastening processes using compatible 3/8" drive sockets and lever-controlled activation.
- Assembly of machinery components, brackets, fabricated products, and similar parts where the specified torque and speed ranges match the process requirements.
FAQs:
- Q: What torque range does the QA4ASLS020NP41S06 provide?
A: This model has a specified torque range of 7.4–14.8 ft-lbs. - Q: What is the specified speed range of this inline nutrunner?
A: The provided product data specifies a speed range of 558–600 RPM. - Q: Which socket drive size is required?
A: The QA4ASLS020NP41S06 uses a 3/8" square drive and should be paired with compatible 3/8" drive sockets. - Q: How is this QA4 Series nutrunner activated?
A: This model uses lever-start operation, allowing the operator to activate the tool directly during the fastening cycle. - Q: When is an inline nutrunner a suitable choice?
A: An inline configuration is suitable when the assembly provides direct access along the fastener axis and does not require an angle head for clearance.
| SKU | 90 psi ft-lbs (Nm) | 90 psi rpm | 77 psi ft-lbs (Nm) | 77 psi rpm | lbs (kg) | in (mm) | in (mm) | in |
|---|---|---|---|---|---|---|---|---|
| Lever Start | ||||||||
| QA4ASLS012NP41S06 | 4.4 – 8.8 (6 – 12) | 1,050 | 4.4 – 7.4 (6 – 10) | 977 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS015NP41S06 | 5.2 – 11.1 (7 – 15) | 850 | 5.2 – 9.4 (7 – 12.7) | 791 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS020NP41S06 | 7.4 – 14.8 (10 – 20) | 600 | 7.4 – 12.5 (10 – 17) | 558 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS027NP41S06 | 10.3 – 19.9 (14 – 27) | 450 | 10.3 – 16.7 (14 – 22.7) | 419 | 3.22 (1.46) | 18.3″ (464) | 0.81″ (21) | 3/8″ |
| QA4ASLS046NP41S06 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.73 (1.69) | 18.8″ (478) | 0.91″ (23) | 3/8″ |
| QA4ASLS046NP41S08 | 14.8 – 33.9 (20 – 46) | 250 | 14.8 – 28.0 (20 – 38) | 233 | 3.77 (1.71) | 18.8″ (478) | 0.91″ (23) | 1/2″ |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
