Ingersoll Rand 2925P1TI Super Duty Impact Wrench | 3/4" Drive | 5200 RPM | 1450 (ft-lbs) Max Torque

Built for high-torque fastening and removal work in rail, heavy machinery, oil and gas, and general industrial operations, the Ingersoll Rand 2925P1Ti Super Duty Impact Wrench delivers 1,100 ft-lbs of forward torque for installation and up to 1,450 ft-lbs of maximum reverse torque for breaking loose resistant fasteners. Its 3/4" square drive with thru-hole accepts compatible impact-rated sockets and positive retention hardware, while the 5,200 RPM free speed supports efficient fastener run-down before the impact mechanism encounters resistance.

The 2925P1Ti uses a twin hammer impact mechanism (two hammers that deliver balanced impacts to the anvil for consistent torque transfer) and a titanium hammer case that combines durability with lower weight. Its pistol configuration and trigger actuation provide a familiar operating position, while bronze endplates and a corrosion-preventative treatment help protect internal components in wet and outdoor environments. Pressure-fed mechanism lubrication distributes lubricant throughout the impact system, and the integral muffler helps manage exhaust noise during industrial use.

Type: Air Impact Wrench | Series: 2925 Series | Model: 2925P1Ti | Configuration: Pistol | Actuation: Trigger | Drive Size: 3/4" | Drive Type: Square, Thru-Hole | Impact Mechanism: Twin Hammer | Forward Torque: 1,100 ft-lbs / 1,492 Nm | Max Reverse Torque: 1,450 ft-lbs / 1,966 Nm | Blows Per Minute: 1,050 BPM | Free Speed: 5,200 RPM | Impacting Sound Level: 95.9 / 106.9 dB(A) pressure/power | Free Speed Sound Level: 99.6 / 110.6 dB(A) pressure/power | Vibration Level: 10.5 m/s² (K: 1) | Weight: 12 lbs / 5.44 kg | Width: 3.5" / 89 mm | Height: 9.6" / 244 mm | Length: 8.9" / 226 mm | Air Inlet: 3/8" NPT | Minimum Hose Size: 1/2" / 13 mm | Air Consumption at Load: 60 CFM / 1,699 L/min | Average Air Consumption: 12 CFM / 340 L/min | Operating Pressure: 90 PSI / 6.2 bar

Features:

• Titanium hammer case combines durability with reduced weight for easier handling during large-fastener work.
• Twin hammer impact mechanism provides consistent power and is less sensitive to fluctuations in air pressure.
• Bronze endplates and corrosion-preventative treatment help protect internal components against corrosion and wear in wet or outdoor environments.
• Pressure-fed mechanism lubrication provides lubricant coverage throughout the impact mechanism.
• Pistol configuration with trigger actuation provides straightforward control during fastening and removal operations.
• 3/4" square drive with thru-hole supports compatible impact sockets and positive socket-retention hardware.
• Integral muffler helps manage exhaust noise during pneumatic tool operation.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Heavy machinery maintenance — removing and installing large fasteners on construction, mining, agricultural, and industrial equipment.
• Rail and transportation service — handling substantial bolted connections during equipment maintenance and repair operations.
• Industrial maintenance and MRO — servicing production machinery, structural assemblies, pumps, and plant equipment with 3/4"-drive fasteners.
• Oil and gas operations — completing pneumatic fastening tasks in field and facility maintenance environments where the tool's corrosion-resistant construction is beneficial.
• Manufacturing and equipment assembly — running down and removing large nuts and bolts during machinery assembly, overhaul, and scheduled maintenance.

FAQs:

• Q: Is 1,450 ft-lbs the tightening torque of the Ingersoll Rand 2925P1Ti?
  A: No. Ingersoll Rand lists 1,450 ft-lbs as the maximum reverse torque for fastener removal. The manufacturer specifies 1,100 ft-lbs of forward torque for fastening.
• Q: How much compressed air does the 2925P1Ti require?
  A: The manufacturer lists 60 CFM air consumption at load and 12 CFM average air consumption at 90 PSI. Compressor selection should account for the expected duty cycle and be capable of maintaining adequate airflow and pressure while the wrench is operating under load.
• Q: What air hose size should be used with this impact wrench?
  A: Ingersoll Rand specifies a minimum 1/2" or 13 mm air hose and a 3/8" NPT air inlet. Undersized hoses, restrictive couplers, and inadequate air delivery can reduce pneumatic tool performance.
• Q: What sockets fit the 2925P1Ti?
  A: The wrench uses a 3/4" square drive with a thru-hole and requires compatible 3/4"-drive impact-rated sockets. The thru-hole

Ingersoll Rand 2925P1TI Impact Wrench Parts List

Looking for more information about Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com