Built for high-pressure hose retrieval on mobile service trucks, fleet maintenance skids, utility equipment, and industrial fluid handling stations, the Coxreels HP1125-5-200-ED combines 12V DC electric rewind with an explosion proof 1/2 HP motor to manage up to 200 ft of 3/4" I.D. hose at a 4500 PSI maximum pressure rating. The 12V DC configuration supports vehicle-based power systems, while the explosion proof motor option is intended for applications where the motor specification must be reviewed against the site's electrical and safety requirements.
Part of the HP1125 Series, this high-pressure motor rewind reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, open drum slot design, and permanently lubricated self-aligning pillow block bearings to support controlled hose payout and powered rewind. The external fluid path, electroless nickel plated steel 90° full-flow NPT swivel, and AFLAS swivel seals support compatible high-pressure oil, grease, hydraulic, lubrication, and fluid service when paired with the proper hose and fittings. This model is supplied less hose, allowing buyers to install a hose assembly selected for the exact pressure, fluid, temperature, bend radius, fitting, and installation environment.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Motor: 12V DC Explosion Proof 1/2 HP Electric Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 4500 PSI | Hose Included: No | Swivel Seals: AFLAS | Rewind: Electric Motor | Overall Dimensions: 38" W x 19.25" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- 12V DC explosion proof 1/2 HP electric motor rewind supports powered hose retrieval on vehicles, skids, and equipment platforms using DC power.
- HP1125 Series construction supports high-pressure applications up to 4500 PSI.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel.
- AFLAS swivel seals are used on HP1125 Series reels for compatible high-pressure fluid service.
- Reliable direct gear drive on motor driven models provides smooth powered retraction without a chain drive.
- One-piece all welded steel 'A' frame construction provides a rigid mounting base for trucks, skids, benches, floors, or fixed equipment.
- Exclusive low profile outlet riser and open drum slot design help produce a flat, smooth hose wrap while reducing hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
Made in USA: 
Applications:
- Mobile hydraulic service trucks using 12V DC power to rewind long high-pressure hose runs after field repair work.
- Fleet and heavy equipment maintenance bays handling grease, hydraulic oil, lubrication, or compatible high-pressure fluid hose assemblies.
- Construction, agriculture, and utility service skids where vehicle-based DC power is preferred for reel operation.
- Industrial MRO stations where powered rewind helps keep 3/4" hose controlled, stored, and off the floor between service tasks.
- Facilities reviewing explosion proof motor options for reel installations, subject to site electrical classification and safety approval.
FAQs:
- Q: What does 'less hose' mean on the HP1125-5-200-ED?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'ED' motor option indicate?
A: For this listing, the 'ED' configuration refers to a 12V DC explosion proof 1/2 HP electric motor rewind option. It provides powered hose retraction instead of manual hand crank, air motor, or hydraulic rewind operation. - Q: Does the explosion proof motor make the complete reel approved for hazardous locations?
A: Not by itself. The motor option is listed as explosion proof, but the complete installation, wiring, controls, switches, grounding, hose assembly, and area classification must be reviewed by qualified personnel before use in a classified or hazardous location. - Q: What makes the HP1125 Series different from the standard 1125 Series?
A: The HP1125 Series is the high-pressure version and this model is listed at 4500 PSI. It also uses high-pressure swivel construction and AFLAS swivel seals for compatible high-pressure fluid service. - Q: Can this reel be used for hydraulic oil or grease service?
A: Yes, when the selected hose, fittings, seals, temperature range, and complete assembly are compatible with the fluid and system pressure. The reel is rated to 4500 PSI, but the installed hose assembly must also meet the application requirements.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
